TOA RM-200XF FIREMAN’S MICROPHONE

Discontinued

1,228.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well. Specification Power Requirement 24V DC (Operating range: 16 – 40V DC) […]

 

Read more

A dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.
Specification
Power Requirement 24V DC (Operating range: 16 – 40V DC)
Current Consumption Under 200mA (RM-200XF), 850mA (with 10 RM-210s connected)
Audio Output 0db*, 600, balanced
Hand-Held Microphone Dynamic microphone, Function switch (default: Press-talk), Microphone element fault detection
Distortion Under 1%
Frequency Response 100 – 15,000Hz
Signal-to-Noise Ratio Over 55dB
Internal Speaker 200mW
Volume Control Microphone volume control, Monitor speaker volume control
Number of Function Keys 5 (including Hand-held micropnone’s switch), extendable up to 105 (with 10 RM-210s connected)
Key Extension 10 keys extension per RM-210, EXTENSION connector
Number of Connectable Units 4
Communication System LONWORKS twisted pair free topology transceiver
Connection Cable and Connector Category 5 STP cable, plug-in screw connector
Communication Distance 500m (Free topology wiring)
Finish ABS resin, bluish gray (PANTON 538 or its equivalent)
Dimensions 200 (W) x 215 (H) x 82.5 (D)mm (excluding the coiled cord)
Weight 1.2kg
Accessory Plug-in screw terminal x 1, Wall mounting bracket x 1, Wall mounting screw x 2, Box mounting screw x 2
Applicable Box YC-301, YC-11A
*0 dB = 1 V
Weight 1.20 kg

Reviews

There are no reviews yet.

Be the first to review “TOA RM-200XF FIREMAN’S MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA RM-200XF FIREMAN'S MICROPHONE removeTOA FFT 10 Reapeter for RM-200X removeTOA PGW-6R Music program selector removeTOA RM-300MF Fireman's Microphone removeTOA RM-200M Remote Microphone Console removeTOA AT-50UP 50w volume control remove
NameTOA RM-200XF FIREMAN'S MICROPHONE removeTOA FFT 10 Reapeter for RM-200X removeTOA PGW-6R Music program selector removeTOA RM-300MF Fireman's Microphone removeTOA RM-200M Remote Microphone Console removeTOA AT-50UP 50w volume control remove
Image
SKURM-200XFFFT 10PGW-6RRM-300MFRM-200MAT-50UP
Rating
Price 1,228.00 incl. GR VAT 52.39 incl. GR VAT 78.14 incl. GR VAT 736.99 incl. GR VAT 492.47 incl. GR VAT 119.51 incl. GR VAT
Stock

Out of stock

In stock

In stock

Available on backorder

In stock

Available on backorder

AvailabilityOut of stockIn stockIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentA dedicated microphone for the VX-2000 system that fulfills the requirements of British and European standards:BS5839 part 8, EN60849 and IEC60849. The RM-200XF is designed to be exclusively used for emergency broadcast, however it can be used for general purpose broadcast applications as well.
Specification
Power Requirement 24V DC (Operating range: 16 - 40V DC)
Current Consumption Under 200mA (RM-200XF), 850mA (with 10 RM-210s connected)
Audio Output 0db*, 600, balanced
Hand-Held Microphone Dynamic microphone, Function switch (default: Press-talk), Microphone element fault detection
Distortion Under 1%
Frequency Response 100 - 15,000Hz
Signal-to-Noise Ratio Over 55dB
Internal Speaker 200mW
Volume Control Microphone volume control, Monitor speaker volume control
Number of Function Keys 5 (including Hand-held micropnone's switch), extendable up to 105 (with 10 RM-210s connected) Key Extension 10 keys extension per RM-210, EXTENSION connector
Number of Connectable Units 4
Communication System LONWORKS twisted pair free topology transceiver
Connection Cable and Connector Category 5 STP cable, plug-in screw connector
Communication Distance 500m (Free topology wiring)
Finish ABS resin, bluish gray (PANTON 538 or its equivalent)
Dimensions 200 (W) x 215 (H) x 82.5 (D)mm (excluding the coiled cord)
Weight 1.2kg
Accessory Plug-in screw terminal x 1, Wall mounting bracket x 1, Wall mounting screw x 2, Box mounting screw x 2
Applicable Box YC-301, YC-11A
*0 dB = 1 V
Music Program Selector 1-6 with Relay
Toa - 100V installation

The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.

Specification
Power Source 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)
Current Consumption 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)
Frequency Response 200 Hz - 15 kHz
Distortion 1 % or less
S/N Ratio 55 dB or more
Microphone Unidirectional dynamic microphone with talk key, compressor (on/off switchable)
Volume Control Microphone volume control, Buzzer volume control
Connection Cable Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal
Maximum Cable Distance Total 800 m (874.89 yd)
No. of Connectable RM-320F Max. 3 units
Operation Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
Indicator Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)
Weight 1.1 kg (2.43 lb) (with wall mounting bracket unit)
Accessory Wall mounting bracket unit …1, Wall mounting screw …2

 

RM-200M - Five/ten zone console for VM-2120/2240 amplfiers

The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.

These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.

SPECIFICATIONS:

 

Power Requirement 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.)
Distortion Less than 1%
Frequency Response 100 - 10,000 Hz
Distortion Less than 1%
Signal-to-Noise Ratio More than 60 dB
Audio Output 0 dB*1, 600 O, balanced
Microphone Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast
Emergency Broadcast Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch
Voice Announcement Board Control Activation of 5 messages*2
Number of Connectable Units Up to 4
Communication System RS-485
Volume Control Microphone volume control
Connection Cable and Connector Category 5 STP cable, RJ45 connector
Communication Distance 800 m maximum in total
Finish ABS resin
Dimensions 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded)

*1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.

The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor.

Weight1.20 kg1.00 kg0.50 kg1.10 kg3.00 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.20 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 1.10 kg
Weight 3.00 kg
Weight 0.40 kg