| Content |
TOA SR-A Series Mid-Size Line Arrays feature TOAʼs proprietary "Synch-Drive" horn technology (pat. pending) to provide a uniform, high frequency sound field offering excellent sound clarity and minimal interference. Mid-high modules include the SR-A12L (long-throw) and the SR-A12S (short-throw) each with dual compression drivers and 12" low frequency driver. The SR-A18 subwoofer module features a heavy duty 18" low frequency driver rated at 720 Watts continuous power handling. Along with weather resistant models and multiple mounting hardware options, the SR-A Series Line Arrays are backed with a five year product warranty. | FEATURES: | - Designed for wide bandwidth response - These compact and powerful 2-way modular speaker units can be used in multiple configurations as required to deliver greater output power with a more extended frequency response.
- High-performance driver units - Each Type A Series speaker module contains a 30cm (12“) low frequency unit and a high-frequency horn attached to two compression drivers for greater output.
- Wavefront control - The horn incorporates a proprietary phase wavefront control throat that functions to obtain the best possible performance from the high frequency drivers.
- Adjustable sound coverage - Type A Series provides two speaker configurations designed for specific coverage characteristics, each having a different taper. The 5-degree taper is for effectively transmitting sound over distance while the 15-degree taper is optimized for excellent short range coverage.
- Simple maintenance - Maintenance and servicing are made easier on the Type A Series to suit it for permanent installations. All driver replacement is possible from the speaker's rear, a simple and speedy procedure.
- SR-A12L Long-throw enclosure (15°V x 90°H)
- SR-A12S Short-throw enclosure (5°V x 90°H)
- Components: Dual compression drivers. 12” low frequency driver. Power handling: 450 W (LF), 180 W (HF)
- SR-A18 Subwoofer (Sold Seperately) 18” low frequency Power handling: 720 W
- Five year warranty
| | General Specs: | | | Enclosure: | ....... | Bass Reflex Type | | | Power Handling Capacity: | ....... | Continuous Program: Low 450W, High 180W | | | Rated Impedance: | ....... | Low: 8 Ohms, High: 16 Ohms | | | Sensitivity: | ....... | Low: 98dB, High: 109dB both at 1W/1M | | | Frequency Response: | ....... | 50 Hz - 20kHz (When using DP-0206 Option) | | | Crossover Frequency: | ....... | 1000Hz (When using DP-0206 Option) | | | Directivity Angle: | ....... | Horizontal: 90 degrees
Vertical: 15 degrees | | | Speaker Component: | ....... | Low frequency: 30cm cone-type
High frequency: Wave front control horn 90° (horizontal) × 15° (vertical) + compression driver × 2 | | Input Connector: | ....... | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x 2 (usable connector: Neutrik NL4FC) | | | Finish: | Enclosure: | ....... | Plywood black, paint | | | Front Grill: | ....... | Punched steel plate, black, acrylic paint | | Dimensions: | ....... | 740 (W) x 433 (H) x 467 (D) mm | | | Weight: | ....... | 47kg including accessories | | | Accessories: | ....... | Joint Plate x 2, Joint plate mounting bolt (M10) x 16 | | | Option: | ....... | Rigging Frame: SR-RF12, Digital Processor: DP-0206 | |
|
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It satisfies the water protection requirements set down in the IPX4 Standard. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
|
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
| |
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
| |
Coverage Pattern
|
:
|
100 x 15 nominal
| |
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
| |
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
| |
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
| |
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
| |
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
| |
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
18 mm, 11-ply birch plywood
| |
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
| |
Finish
|
:
|
Black DuraFlex? finish
| |
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
| |
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
| |
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
| |
Net Weight
|
:
|
21.8 kg (48 lb)
| |
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
The VT4880A Dual 18" Ultra Long Excursion Subwoofer Line Array Element is designed to deliver high fidelity sound reinforcement of sub-low frequencies for a wide variety of live music and A/V support applications. Typical uses include concert audio and multi-media presentations where extended low-frequency performance is desired.
| Features : | | Specifications : |
- Advanced, Ultra Long Excursion Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers
| - Advanced Construction Techniques and PlyMax™ panels provide exceptionally rigid, lightweight enclosure
| - Rugged DuraFlex™ exterior finish; weather-resistant components
| - Integrated Suspension System: premium heat-treated alloys. Hingebars included.
| | |
| Frequency Range | : | 25 Hz – 160 Hz (-10 dB) |
| | Frequency Response | : | 29 Hz – 120 Hz (±3 dB) |
| | Continuous Power Rating | : | 4000W |
| | Sensitivity | : | 95dB (1W/1m) |
| | Nominal Impedances | : | 2 x 8 ohms |
| | Dimensions (W x H x D ) | : | 1229 mm x 493 mm x 860 mm
(48.3" x 19.4" x 33.9“) |
| | Weight | : | 83.9 kg (185 lb) | | |
|
Hχοστήλη Line Array, 150W/600W peak, με τεχνολογία σταθερής διασποράς Constant Beam width Technology με 8 x 2? full range woofers 80Hz-20kHz-Οριζόντια x Κάθετη Διασπορά 150 x 20° μοίρες. Διαθέτει διακόπτη επιλογής για χρήση φωνής 115dB cont/121 peak/Μουσικής 111dB cont/117 peak. Διαθέτει κύκλωμα sonic guard για προστασία υπερφόρτωσης και μετασχηματιστή για χρήση 70/100V/60W/ 30W/15W ?αλλά και χρήση 8Ω. Περιέχεται βάση στήριξης. Καμπίνα fiberglass/γρίλια αλουμινίου με 10x M6 υποδοχές στήριξης. Πιστοποίηση IP544 /IEC 259 για αντοχή σε υγρασία και αλάτι. Διατίθεται σαν option προστατευτικό κάλυμμα συνδέσεων MTC-PC2. Διαστάσεις ΥΠΒ: 528 x 99 x 153 mm. Χρώμα Μαύρο-Λευκό. Βάρος 4.1kg. |
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.