Content |
The VX-2000SF Surveillance Frame is the output matrix section of the VX-2000 system that assigns audio signals to individual zones from 4 audio buses. It can be extended to up to 5 units. A total of 10 units of output modules and control modules can be installed per VX-2000SF. The following 4 types of modules can be used: the VX-200SP Pilot Tone Detection module, the VX-200SZ Impedance Detection module, the VX-200SI Control Input module, and the VX-200SO Control Output module.
* 0 dB = 1 V Power Source | 24 V DC (operating range: 20 - 40 V DC)
M3.5 screw terminal, distance between barriers: 8.8 mm | Current Consumption | Under 2 A (40 V DC) | Number of Module Slot | 10, usable modules: VX-200SZ, VX-200SP, VX-200SI, VX-200SO | Frequency Response | 20 - 20,000 Hz | Signal to Noise Ratio | Over 60 dB | Distortion | Under 0.5% | Cross Talk | Under -60 dB (1 kHz, 0 dB*) | Audio Link Input/Output | Number of audio busses: 4
0 dB*, electronically balanced, RJ45 female connector
Twisted-pair straight cable (TIA/EIA-586A standard) | Standby Amplifier Link | RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Twisted-pair straight cable (TIA/EIA-586A standard) | Communication System | VX-2000, VX-2000SF: RJ45 female connector × 2, LONWORKS RS-485
VX-2000DS: RJ45 female connector × 2,
Twisted-pair straight cable (TIA/EIA-586A standard) | Operating Temperature | 0℃ to +40℃ | Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint | Dimensions | 482 (W) × 132.6 (H) × 337 (D) mm | Weight | 5.6 kg | Accessory | Rack mounting screw……4, Fiber washer……4, Blank panel……9,
Rack mounting bracket (preinstalled on the unit) ……2,
Standby amp. cable (3 m) ……1, Blank panel mounting screw……18 | Option | Isolation transformer: IT-450 (audio link output) |
|
Music Program Selector 1-6 with Relay
Toa - 100V installation |
The RM-210 is an extension unit for increasing the number of function keys of TOA's RM-200M, RM-200XF and RM-200X Remote Microphones.
Specification |
| Current Consumption | 20mA max. (in terms of RM-200M's DC power input 75mA max. (interms of DC power inputs of RM-200X and RM-200XF) | Connection | Connection to RM-200M, RM-200X or RM-200XF by way of dedicated Cable | Number of Function | Keys 10 | Function | When used to expand the RM-200M:
Selects and activates the Voice Announcement Board messages.
When used to expand the RM-200X and RM-200XF (PC software setting):
Emergency activation, emergency reset, BGM pattern selection, EV message activation, broadcast zone selection, monitor zone selection, chime activation, Talk switch activation, control output activation, input volume adjustment, zone volume adjustment, and failure output indication and reset. | Finish | ABS resin, bluish gray (PANTON 538 or its equivalent) | Dimensions | 110 (W) x 76.5 (H) x 215 (D)mm | Weight | 350g | Accessory | Extension cable x 1, Linkage bracket A x 1, Linkage bracket B x 1, Screw for linkage bracket x 12 |
|
Volume Control 12W with priority.
|
Five attenuation settings (OFF, 0/-6/-12/ -16dB), over an input range from 0.5W to 30W. |
| - AUTOMATIC CHARGING Tapered charging circuitry charges your backup batteries without risk of overcharging. - EASY BATTERY MONITORING Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries. | | | | | PB-607 | Battery Requirement | 24V DC | Starting Current | 3A Max. | Charge Complete Voltage | 27.3V ±10% | Operation Temperature | -10℃~+40℃ | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 130W | Weight(SET) | 7Kg/15.4Ib | Dimension(SET) | 482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in | | | |
|
Reviews
There are no reviews yet.