TONAR 6020-DS SPherical Diamond Stylus N44C For M44C Shure Made In Japan

38.43 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
TONAR Stylus 6020DS N 44C with Guard For Shure Cartridges M 44C High Quality Stylus Conical Diamond for Turntable Specs: Conical Diamond Tip 0.3×0.7 mil Tracking Force: 3.0 – 5.0 grams tracking pressure Stylus Color: Light Blue Made Japan For Cartridges: M44CS, M44, M44-7, M44MR, M44G, M44MA, M44MB, M44C, M44MC, M55, M44E, M44EM, M44MA, M44MB, […]

 

Read more

TONAR Stylus 6020DS N 44C with Guard

For Shure Cartridges M 44C High Quality Stylus Conical Diamond for Turntable

Specs:

  • Conical Diamond Tip 0.3×0.7 mil
  • Tracking Force: 3.0 – 5.0 grams tracking pressure
  • Stylus Color: Light Blue
  • Made Japan

For Cartridges: M44CS, M44, M44-7, M44MR, M44G, M44MA, M44MB, M44C, M44MC, M55, M44E, M44EM, M44MA, M44MB, M44MF, M80EM98, M98/A, M99, Shure AMC50E.

For Needles: N44C, N44-5, N44-7X, N44-7 & N44G, V2NE M44-7 M44G M44MA M44C M44MB BLUE,

Fits the following Turntables models:Dual 1009, 1016, 1019, Grundig Marienburg 3000, Nymphenburg 2 A, Nymphenburg 3, Nymphenburg 62, Stockholm, 2000 A, 2000 B Studio, 2000 C, 4 D Studio, Telefunken 220 Studio and more

Note: This needle was installed on the following turntable models when they were sold.
If the original cartridge has been replaced with a different type, this needle won’t fit.
Match your old needle to the picture before you make a purchase.

 

Weight 0.15 kg

Reviews

There are no reviews yet.

Be the first to review “TONAR 6020-DS SPherical Diamond Stylus N44C For M44C Shure Made In Japan”

Your email address will not be published. Required fields are marked *

Quick Comparison

TONAR 6020-DS SPherical Diamond Stylus N44C For M44C Shure Made In Japan removeORTOFON DJ S STYLUS removeORTOFON STYLUS 540MKII removeORTOFON STYLUS 320 removeORTOFON 2M BLUE REPLACEMENT STYLUS Nude Elliptical Type removeORTOFON 510 MKII STYLUS remove
NameTONAR 6020-DS SPherical Diamond Stylus N44C For M44C Shure Made In Japan removeORTOFON DJ S STYLUS removeORTOFON STYLUS 540MKII removeORTOFON STYLUS 320 removeORTOFON 2M BLUE REPLACEMENT STYLUS Nude Elliptical Type removeORTOFON 510 MKII STYLUS remove
Imagetonar 6020ds n44c m44c shure toshiba stylus
SKU6020DSSTYLUS DJ S540MKIISTYLUS320ST2MBLUE510MKII
Rating
Price38.43 incl. GR VAT48.99 incl. GR VAT319.00 incl. GR VAT69.01 incl. GR VAT 151.28 incl. GR VAT59.00 incl. GR VAT
Stock

In stock (can be backordered)

In stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Out of stock

AvailabilityIn stock (can be backordered)In stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderOut of stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Description
ContentTONAR Stylus 6020DS N 44C with Guard For Shure Cartridges M 44C High Quality Stylus Conical Diamond for Turntable Specs:
  • Conical Diamond Tip 0.3×0.7 mil
  • Tracking Force: 3.0 – 5.0 grams tracking pressure
  • Stylus Color: Light Blue
  • Made Japan
For Cartridges: M44CS, M44, M44-7, M44MR, M44G, M44MA, M44MB, M44C, M44MC, M55, M44E, M44EM, M44MA, M44MB, M44MF, M80EM98, M98/A, M99, Shure AMC50E. For Needles: N44C, N44-5, N44-7X, N44-7 & N44G, V2NE M44-7 M44G M44MA M44C M44MB BLUE, Fits the following Turntables models:Dual 1009, 1016, 1019, Grundig Marienburg 3000, Nymphenburg 2 A, Nymphenburg 3, Nymphenburg 62, Stockholm, 2000 A, 2000 B Studio, 2000 C, 4 D Studio, Telefunken 220 Studio and more Note: This needle was installed on the following turntable models when they were sold. If the original cartridge has been replaced with a different type, this needle won’t fit. Match your old needle to the picture before you make a purchase.  
DJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world! DJ S Stylus Technical data Output voltage at 1000Hz, 5cm/sec.  - 6 mV Channel balance at 1kHz  - 2 dB Channel separation at 1kHz  - 23 dB Channel separation at 15 kHz  - 15 dB Frequency range at -3dB  - 20-20.000 Hz Frequency response  - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force  - 80 μm Compliance, dynamic lateral -  9 μm/m N Stylus type  - Spherical Stylus tip radius  -  R 18 μm Tracking force range  - 2,0-4,0 g (20-40 mN) Tracking force recommended -  3,0 g (30 mN) Tracking angle -  20° Internal impedance, DC resistance -  750 Ohm Internal inductance  - 450 mH Recommended load resistance  - 47 kOhm Recommended load capacitance  - 200-600 pF Cartridge weight  - 18,5 g Compatible with cartridges -  DJ S

Ortofon 540MKII Stylus Technical Data

  • Frequency range 20-27.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force 90 µm
  • Compliance, dynamic, lateral 30 µm/mN
  • Stylus type Nude FG 70
  • Stylus tip radius r/R 5/70 µm
  • Equivalent stylus tip mass 0,3 mg
  • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended 1,5 g (15 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges Series 540 Mkll, 540, 540 P
  • Ortofon 320 Stylus Technical Data
    • Frequency range 20-22.000 Hz
    • Frequency response 20-20.000 Hz + 2 / - 3 dB
    • Tracking ability at 315Hz at recommended tracking force 70 µm
    • Compliance, dynamic, lateral 25 µm/mN
    • Stylus type Nude Fine Line
    • Stylus tip radius r/R 8/40 µm
    • Equivalent stylus tip mass 0,5 mg
    • Tracking force range 1,25-17,5 g (12,5-17,5 mN)
    • Tracking force, recommended 1,5 g (15 mN)
    • Tracking angle 20°
    • Stylus colour Grey
    • Recommended for following cartridges Series 320 Universal
    Stylus 2M Blue
    Technical data
    Frequency range 20-25.000 Hz
    Frequency response 20-20.000 Hz + 2 / - 1 dB
    Tracking ability at 315Hz at recommended tracking force *) 80 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type Nude Elliptical
    Stylus tip radius r/R 8/18 µm
    Equivalent stylus tip mass 0,5 mg
    Tracking force range 1,6-2,0 g (16-20 mN)
    Tracking force, recommended 1,8 g (18 mN)
    Tracking angle 20°
    Stylus colour Blue
    Recommended for following cartridges 2M Blue
    *) Typical value
    Ortofon 510MKII Stylus Technical Data
    • Frequency range20-23.000 Hz
    • Frequency response20-20.000 Hz + 2 / - 3 dB
    • Tracking ability at 315Hz at recommended tracking force70 µm
    • Compliance, dynamic, lateral25 µm/mN
    • Stylus typeElliptical
    • Stylus tip radiusr/R 8/18 µm
    • Equivalent stylus tip mass0,3 mg
    • Tracking force range1,25-1,75 g (12,5-17,5 mN)
    • Tracking force, recommended1,5 g (15 mN)
    • Tracking angle20°
    • Stylus colourBlack
    • Recommended for following cartridgesSeries 510 Mkll, 510, 510 P
    Weight0.15 kg0.30 kg0.20 kg0.20 kg0.20 kg0.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.15 kg
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg