| Content | Genuine Stylus Tonar 734-DS AKAI RS-100 PC100
Specs:
- Stylus RS100
- Spherical Diamond Tip 0.7 mil
- Tracking Force: 1.5 – 2.5 grams tracking pressure
- Stylus Color: Black
For Cartridges: PC-100, PC-120, Eagle P-750, P-750E, YM108, YM308
For Needles: N 45, Akai RS 100
Fits the following Turntables models: Akai AP 100, AP 101, AP 102, AP 206, AP 206 C, AP 207, AP 306, AP 306 C, AP 307, AP D 02, AP Q 4, P 103, Hitachi DS-ST-103, DDT300, HT400, MCD100, SDT1SU, SDT300, SDT400, SDT 7660
Note: This needle was installed on the following turntable models when they were sold.
If the original cartridge has been replaced with a different type, this needle won’t fit.
Match your old needle to the picture before you make a purchase.
| Ortofon 520MKII Stylus Technical Data
- Frequency range 20-23.000 Hz
- Frequency response 20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force 70 µm
- Compliance, dynamic, lateral 25 µm/mN
- Stylus type Nude Elliptical
- Stylus tip radius r/R 8/18 µm
- Equivalent stylus tip mass 0,3 mg
- Tracking force range 1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended 1,5 g (15 mN)
- Tracking angle 20°
- Stylus colour Black
- Recommended for following cartridges Series 520 Mkll, 520, 520 P
|
|
Ortofon 530MKII Stylus Technical Data
Frequency range 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 530 Mkll, 530, 530 P |
| Technical data
Frequency range 20-20.000 Hz
Frequency response 20-15.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force *) 60 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type spherical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,25-2,25 g (17,5-22,5 mN)
Tracking force, recommended 2,0 g (20 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges - Dual TKS 49 S
*) Typical value | DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
|
Reviews
There are no reviews yet.