Content | Standing tall, at the top of the range, the Wharfedale Diamond 12.4 is a formidable performer.
Hear every element of music
Ideal for larger rooms, the Wharfedale Diamond 12.4 delivers a ‘no holds barred’ sound, with your favourite music’s dynamics fully intact. Using a second, dedicated bass woofer, the Diamond 12.4 punches hard – making a subwoofer unnecessary in many cases. Not only does this second woofer unit increase the depth and volume of bass, it also helps to 'fill out' the sound at lower volumes, making this an ideal speaker for use at all volume levels.
Flexible speaker
The size of these speakers makes them equally at home as stereo or front speakers as part of a Diamond 12-Series home cinema system. They're also easy to place, working well close to or away from the rear wall.
Ground-up redesign
Although this is a speaker with all the Diamond traits in place, the design is completely new. Making use of powerful computer modelling, the Diamond 12.4 is engineered to perform. Totally new drive units use a motor system more typically found in professional speakers – giving excellent power handling and low distortion. The new Klarity cone material uses a hybrid construction to give lightning-fast response in the bass and mid-range, while the woven textile tweeter delivers the perfect balance between detail and refinement.
Choice of finishes
Available in black, light oak or walnut finishes, the 12.4 suits a wide range of decors. The cabinet itself is engineered from differing thicknesses of MDF to control resonance. Combined with the strategic bracing, this makes it solid and free from the distorting ‘boxy’ sound. In short, you get to hear the soul of your music, distortion-free.
Specifications :
General description 2.5-way ?oorstanding speaker
Enclosure type bass re?ex
Bass driver 6.5"(150mm) advanced PP Cone
Midrange driver 6.5"(150mm) advanced PP Cone
Treble driver 1"(25mm) Textile Dome
AV shield No
Sensitivity(2.83V @ 1m) 89dB
Recommended ampli?er power 30-200W
Peak SPL 102dB
Nominal impedance 8Ω Compatible
Minimum impedance 5Ω
Frequency response(+/-3dB) 40Hz ~ 20kHz
Bass extension(-6dB) 35Hz
Crossover frequency 2.1kHz
Cabinet Volume (in litres) 40.8L
Dimensions ( H x W x D ) (1100+50) x 200 x (350+28) mm
Net weight 22.4kg/pcs
| Two way, double series reflex
2 x Woofer 130 mm.
Coated paper, double magnet
Tweeter 26 mm.
Soft dome (silky fabric)
Impedance: 8 Ohm (min. 6,5)
RMS POWER: 100 W
MAX POWER: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1030x220mm.
Net weight: 16 Kg.
Finish: leather and cherrywood (or walnut vinyl) |
Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers
|
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Dimensions | Metric :5-1/4" W x 5-1/8" D x 42" H | 13.3 x 13.0 x 106.7 cm
Height with Base | Metric :42-7/8" | 104.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition midrange drivers; Two 4-1/2" high definition bass drivers; Two 4-1/2" pressure coupled bass radiators
Base Dimensions | Metric :8-3/4” W x 8-5/8” D | 22.2 x 21.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :35 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 225 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs | 10.4 kg
Warranty :5 Years
|
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
Reviews
There are no reviews yet.