Content |
This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.
|
Zero88 Switch 6 Socapex DMX 6 Channels Digital Switcher
Cost effective 19" dimmer
The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.
The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.
With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.
The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.
Features |
- 3 dimmer curves (normal, linear, switch)
- 12 Memories
- Preheat per channel
- International socket options
- 6 x 10 Amps
- MCB per channel
- Advanced heatsink and fan cooling
- DMX addressing via user interface
|
- 19"
- Built in termination circuit for DMX
- ChilliNet enabled
- RDM hardware ready
- Dimensions - 88mm x 483mm x 360mm
- Weight - 8.0kg
| |
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
| 6-fold switching panel for separate switching of 6 safety sockets 70008275
6-fold switching panel for separate switching of 6 safety sockets
- Fully cabled housing with 6 safety sockets
- 6 switches
- Control via on/off switch on device
- With profile rails suitable for (19") approx. 48 cm units
Package contents
- 1 x device, 1 x user manual
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
3680 W |
Output power: |
Max. 1150 W per channal |
Output current: |
Max. 5 A per channal |
Power connection: |
Fixed power supply cord with safety plug |
Cable length: |
Approx. 0,8 m |
Power output: |
6 x Safety contact (F), hinged lid mounting version fused |
Fuse: |
5 x 20 mm, F 6,3 A Fuse replaceable |
Control: |
On/off switch on device |
Control channels: |
6 |
Diameter mounting holes: |
4 x Ø5mm |
Material: |
Metal |
Color: |
Black, matte |
Front panel width: |
(19") approx. 48 cm |
Mounting height: |
Approx. 9 cm (2 U) |
Mounting depth: |
120 mm |
Dimensions: |
Width: 48,3 cm
Depth: 12,5 cm
Height: 8,9 cm |
Weight: |
2,00 kg |
|
This is a 32 A three-phase power splitter with 3x 32A/400V input and 6 Schuko 16A/250V output.
Each Schuko is protected by a 16A circuit breaker and each phase can be read out by a 4-digit
voltmeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is used for
protection against electronic shock under fault conditions. Also, a CEE-socket is provided for plugging
in power.
| ESD 5K Automatic Voltage Regulator
Automatic tension regulator. For a tension between 120 V. and 250 V. Maintains the output to 220 V.
Max. load 5.000 W. Input and output connections through bananas. Schuko base output auxiliar regulated.
(max. 2.500 W.). Digital display with information of the input tension, output tension, current and protection.
The protection works by overload or an excesive temperature emitting a sound of advise and disconnecting
the load. It has in its rear panel an auxiliar shuko plug.
Dimensions: 230 x 220 x 370 mm. Weight: 16, 3 kgs. |
Reviews
There are no reviews yet.