Content | - Warm, rich, wide range tremolo effect
- True stereo spectrum of sound with two amps
- Works great in mono too!
- Sine, trapezoid and square wave modulation
- Dual Output channels – stereo/mono
- Speed/shape/depth controls
- Excellent dynamic response
- Simple, easy to use design
- 100% Analog design with True Bypass circuitry
- “Effects on” indicator light
- Original XVIVE tone
- Micro pedal package – very small and compact
- Durable all-metal housing
- It doesn't work with battery 9V
- It doesn't contain power supply cable
Application: |
Εl.Guitar |
Type: |
Single |
Display: |
No |
Display: |
No |
Rythms: |
No |
Pedal: |
Υes |
Signature: |
No |
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
| Features twin modes for an expanded range of distortion—taking you from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob.
The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.
- Compact overdrive pedal with warm, smooth overdriven sounds
- Unique asymmetric overdrive circuitry for a classic, natural tube amp growl
- Tone control provides precise adjustment of drive sound
- BOSS 5-year warranty
Input Impedance |
1 M ohms |
Output Impedance |
10 k ohms or greater |
Equivalent Input Noise Level |
–120 dBu or less (IHF-A, Typ.) |
Connectors |
INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor Jack |
Power Supply |
DC 9 V: Dry Battery 9 V type, AC Adaptor |
Current Draw |
12 mA (DC 9 V) |
Accessories |
Dry Battery 9 V type (6F22/9 V) |
Option |
AC Adaptor (PSA-Series) |
Size and Weight ( incl. battery ) |
Width |
|
Depth |
|
Height |
|
Weight |
|
| All-Time Favorite Chorus Effects, Modeled in a Single X-Series Pedal
Introducing the DigiTech CF-7 Chorus Factory. Think of it as 1-stomp shopping for all of your ultra high quality chorus needs. Besides Speed and Depth knobs, they've included a 2-in-1 concentric control that lets you tweak 2 more key parameters of each chorus effect. Add Flexible Output Mode, cast metal treadle and sleek carbon fiber finish and you have an industrial strength creative tool. If one of the best classic choruses with added control begs to be a part of your sound, you've just found the perfect pedal.
Features:
7 classic chorus effects models
Speed, depth and 2 parameter controls for each effect
Flexible output mode -- configure outputs for amp or mixer
CIT models classic speaker cabinets
Cast-metal treadle and chassis
Unique carbon-fiber look
Non-skid rubber base
Based on the Boss CH-1*
Based on the EH Small Clone*
Based on the DigiTech Multi Chorus
DigiTech, X-Series, Flexible Output Mode, DigiTech Whammy, Multi Chorus, CIT and CF-7 Chorus Factory are trademarks of Harman International Industries, Inc. | The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
Reviews
There are no reviews yet.