YAMAHA A-S2200 (SI/PB) Hi-Fi Amplifier

Original price was: €3,648.00.Current price is: €3,523.80. incl. GR VAT

Available on backorder

EAN: 4957812653183
Installments calculation
CompareAdd to wishlist Submit Better Price

Oλοκληρωμένος ενισχυτής 160 W χ 2

Oλοκληρωμένος ενισχυτής 160 W χ 2

 

Read more

Nοσταλγικός HI-FI σχεδιασμός . Tεχνολογία του σήμερα .

 

Συνάισθημα

Η μουσική γεννιέται από κάτι συναισθηματικό. Μια μοναδική, προσωπική ιστορία που ένας καλλιτέχνης επιθυμεί να μοιραστεί. Η κατανόηση του τρόπου δημιουργίας της μουσικής και της βοήθειας των καλλιτεχνών να την δημιουργήσουν, ενσωματώνεται  στο DNA της Yamaha μια θεμελιώδη κατανόηση της μουσικής,

LEARN MORE

 

Aυθεντικός HI-FI ήχος

O αυθεντικός, καθαρός Hi-Fi ήχος δεν έχει να κάνει με την ακρόαση του εξοπλισμού  αλλα  περισσότερο με τον ήχο του καλλιτέχνη να παίζει ζωντανά στο δωμάτιο.

 

LEARN MORE

Pυθμός

Νιώθοντας τη μουσική. Όχι μόνο να νιώθεις σαν να είσαι εκεί, αλλά να νιώθεις την ιστορία στη μουσική. Νιώθοντας το ρυθμό . Μόνο μια πραγματική αναπαράσταση της μουσικής μπορεί να το προσφέρει.

Xαρακτηριστικά :

 

Μέγιστη ισχύς (4 ohms, 1kHz, 0.7% THD, για τηνΕυρώπη )
160 W + 160 W

High Dynamic Power/Ανα κανάλι (8/6/4/2 ohms)
105/135/190/220 W

Damping Factor
250 (1 kHz, 8 ohms)

Απόκριση συχνότητας
+0 / -3 dB (5Hz-100kHz) , +0 / -0.3 dB(20 Hz-20 kHz)

RIAA Equalization Deviation
+/-0.5 dB (PHONO (MM/MC))

Διαστάσεις  (Π x Υ x Β)
435x157x463 mm

Βάρος
22.7 kg; 50.0 lbs

Receiver / Ολοκληρωμένος  Ενισχυτής

Ονοματική Ισχύς Εξόδου
[20 Hz-20 kHz, 0.07% THD] 90 W + 90 W (8 ohms), 150 W + 150 W (4 ohms)

Συνολική Αρμονική Παραμόρφωση  (20Hz to 20kHz)
[Input 0.5 V] PHONO MC>LINE2 OUT: 0.02% (1.2 mVrms), PHONO>LINE2 OUT: 0.005% (1.2 Vrms), CD, etc.>SP OUT: 0.035% (50 W/8 ohms)

Signal-to-Noise Ratio
PHONO MC: 90 db, PHONO MM: 96 dB, CD, etc.:110dB, 114 dB

Ευαισθησία εισόδου
[1 kHz, 100 W/8 ohms] PHONO MC: 150 uVrms/50 ohms, PHONO MM: 3.5 mVrms/47 kohms, CD, etc.: 200 mVrms/47 kohms, MAIN IN: 1 Vrms/47 kohms, BAL:200 mVrms/100kohms

Transformer
625VA (Toroidal)

 

Weight 23 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA A-S2200 (SI/PB) Hi-Fi Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA A-S2200 (SI/PB) Hi-Fi Amplifier removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC removeYAMAHA A-S201 Integrated Amplifier 2 x 140W removeYAMAHA A-S2100 (PB) Amplifier removeMARANTZ MM7025 Stereo amplifier removePOLK AUDIO SWA 500 Dedicated Digital Power Amplifier For CSW Series 800W/4Ω 250W/8Ω remove
NameYAMAHA A-S2200 (SI/PB) Hi-Fi Amplifier removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC removeYAMAHA A-S201 Integrated Amplifier 2 x 140W removeYAMAHA A-S2100 (PB) Amplifier removeMARANTZ MM7025 Stereo amplifier removePOLK AUDIO SWA 500 Dedicated Digital Power Amplifier For CSW Series 800W/4Ω 250W/8Ω remove
ImageYAMAHA A-S2200 (SI/PB) Oλοκληρωμένος Eνισχυτής - Yamaha
SKUS000.30926CXA80S000.30898S000.30900MM7025SWA-500
Rating
Price Original price was: €3,648.00.Current price is: €3,523.80. incl. GR VAT Original price was: €1,230.00.Current price is: €1,229.00. incl. GR VAT Original price was: €289.00.Current price is: €279.30. incl. GR VAT Original price was: €2,632.00.Current price is: €2,115.00. incl. GR VAT990.00 incl. GR VAT699.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionOλοκληρωμένος ενισχυτής 160 W χ 2
ContentNοσταλγικός HI-FI σχεδιασμός . Tεχνολογία του σήμερα .   Συνάισθημα Η μουσική γεννιέται από κάτι συναισθηματικό. Μια μοναδική, προσωπική ιστορία που ένας καλλιτέχνης επιθυμεί να μοιραστεί. Η κατανόηση του τρόπου δημιουργίας της μουσικής και της βοήθειας των καλλιτεχνών να την δημιουργήσουν, ενσωματώνεται  στο DNA της Yamaha μια θεμελιώδη κατανόηση της μουσικής, LEARN MORE   Aυθεντικός HI-FI ήχος O αυθεντικός, καθαρός Hi-Fi ήχος δεν έχει να κάνει με την ακρόαση του εξοπλισμού  αλλα  περισσότερο με τον ήχο του καλλιτέχνη να παίζει ζωντανά στο δωμάτιο.   LEARN MORE Pυθμός Νιώθοντας τη μουσική. Όχι μόνο να νιώθεις σαν να είσαι εκεί, αλλά να νιώθεις την ιστορία στη μουσική. Νιώθοντας το ρυθμό . Μόνο μια πραγματική αναπαράσταση της μουσικής μπορεί να το προσφέρει. Xαρακτηριστικά :   Μέγιστη ισχύς (4 ohms, 1kHz, 0.7% THD, για τηνΕυρώπη ) 160 W + 160 W High Dynamic Power/Ανα κανάλι (8/6/4/2 ohms) 105/135/190/220 W Damping Factor 250 (1 kHz, 8 ohms) Απόκριση συχνότητας +0 / -3 dB (5Hz-100kHz) , +0 / -0.3 dB(20 Hz-20 kHz) RIAA Equalization Deviation +/-0.5 dB (PHONO (MM/MC)) Διαστάσεις  (Π x Υ x Β) 435x157x463 mm Βάρος 22.7 kg; 50.0 lbs Receiver / Ολοκληρωμένος  Ενισχυτής Ονοματική Ισχύς Εξόδου [20 Hz-20 kHz, 0.07% THD] 90 W + 90 W (8 ohms), 150 W + 150 W (4 ohms) Συνολική Αρμονική Παραμόρφωση  (20Hz to 20kHz) [Input 0.5 V] PHONO MC>LINE2 OUT: 0.02% (1.2 mVrms), PHONO>LINE2 OUT: 0.005% (1.2 Vrms), CD, etc.>SP OUT: 0.035% (50 W/8 ohms) Signal-to-Noise Ratio PHONO MC: 90 db, PHONO MM: 96 dB, CD, etc.:110dB, 114 dB Ευαισθησία εισόδου [1 kHz, 100 W/8 ohms] PHONO MC: 150 uVrms/50 ohms, PHONO MM: 3.5 mVrms/47 kohms, CD, etc.: 200 mVrms/47 kohms, MAIN IN: 1 Vrms/47 kohms, BAL:200 mVrms/100kohms Transformer 625VA (Toroidal)  

Choosing the DAC

Both our CXA60 and CXA80 amplifiers employ the same Wolfson WM8740 DAC, and thereʼs a very good reason for that: it sounds superb! There are more recent Wolfson DACs in circulation, however none sound quite as great as the WM8740 in our view. Which is why, time and again, we choose them.

  Two-into-one transformer

The CXA80 utilises two separate windings on the oversize toroidal transformer. In effect, this is like having two toroidal transformers wound onto one chassis, providing separate windings for each amplification module. If you get a huge transient in the right channel, it wonʼt unsettle whatʼs going on in the left. The current is being drawn from a different path, rather than a common path, so the output is stable and remains unflustered, whether your liking is for Little Richard or Lamb of God.

Dynamic Thermal Tracking transistors

The transistors used by the CXA80 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can rebias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA80 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA80 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3KHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet.

 

Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA80 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well. Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences.

This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier.We can hear very clearly what each of those components is doing.

 

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

High resolution asynchronous USB

In order to offer 24-bit 192kHz resolution via asynchronous USB we use a specialist XMOS device dedicated to the USB input. Weʼve also written a custom driver to allow PC users to access the higher sample rates available in USB Audio 2 mode. This bespoke code allows us to stream audio files at the highest possible resolution.

Bespoke Bluetooth

If you want to use your CXA80 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100, including the aptX implementation, is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA80 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA80 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA80 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.

 

 

  • Power output:80W RMS into 8 Ohms, 120W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:
High sound quality and sophisticated design based on Yamaha\'s rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
  • Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
  • Pure Direct Mode for greater sound purity
  • Simple and sophisticated design
  • Phono MM terminal for vinyl playback
  • Screw-type speaker terminals
  • Speaker selector and speaker terminals for two systems
  • Simple design remote control
  • Head phone terminal
Specs Receiver / Integrated Amplifier
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) 140 W + 140 W
Maximum Power(8 ohms, 1 kHz, 10% THD) 100 W + 100 W
High Dynamic Power/Channel (8/6/4/2 ohms) 125 W/150 W/165 W/180 W
Frequency Response 10 Hz-100 kHz(0 ± 0.5 dB / 0 ± 3.0 dB)
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) 0.2%
Signal-to-Noise Ratio (CD) 100 dB (S: 500 mV)
Input Sensitivity (CD) 500 mV / 47 k-ohms
Standby Power Consumption 0.5 W
Dimensions (W x H x D) 435 x 141 x 333 mm; 17-1/8" x 5-1/2" x 13-1/8“
Weight 6.7 kg; 14.8 lbs.

Advanced original amplifier circuitry and elimination of signal loss—resulting in a truly
emotional and dynamic sound. This is a high-grade integrated amplifier that has inherited
the new sound of Yamaha in the pursuit of rich musicality..

  • Floating and Balanced Power Amplifier with MOSFETs
  • All-stage fully discrete construction, balanced transmission and low impedance design
  • Superior quality electronic volume control for optimum sound
  • Large capacity power supply unit delivers energetic, dynamic sound with fast response
  • Symmetrical design in pursuit of ideal stereo reproduction
  • Discretely configured phono amp
  • Headphone amp with fully discrete configuration
  • Level meters visually reflect the dynamics in the music
  • Elegant design with luxurious real wood panels
  • Original speaker terminals combine ease of use and beauty with high sound quality

 

First Impressions

If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor.  The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.

ColorBlack
Front PanelAluminum/Glass-reinforced resin
Remote Control
Power RequirementAC 120V 60Hz
Power Consumption330W (Standby: 0.2W)
Dimensions W x H x D (Inchs)17-3/8 x 4-15/16 x 13-7/8
Weight (lbs)23.8

 

 

Driver Complement
Electrical
Dimensions
Cabinet Size     3-1/2" H x 17" W x 12-5/8" D
(8.89cm H x 43.18cm W x 32.07cm D)
Shipping/Other     
Shipping unit:     each
Total Shipping Weight     14.00 lbs. (6.35kgs)

Weight23 kg9.00 kg6.70 kg23.00 kg12.00 kg6.35 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 23 kg
Weight 9.00 kg
Weight 6.70 kg
Weight 23.00 kg
Weight 12.00 kg
Weight 6.35 kg