YAMAHA HS-8-W Studio Monitor White (Piece)

Original price was: €332.00.Current price is: €313.94. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
2-way bass-reflex bi-amplified nearfield studio monitor with 8′ cone woofer and 1′ dome tweeter 38Hz – 30kHz frequency response 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Type Studio monitor nearfield Woofer 8” […]

 

Read more

2-way bass-reflex bi-amplified nearfield studio monitor with 8′ cone woofer and 1′ dome tweeter
38Hz – 30kHz frequency response
75W LF plus 45W HF bi-amp system for high-performance 120W power amplification
ROOM CONTROL and HIGH TRIM response controls
XLR and TRS phone jack inputs accept balanced or unbalanced signals

Type Studio monitor nearfield Woofer 8” Midrange – Tweeter 1′ dome Amplifiers Power 120W (LF:75W, HF:45W) Input/Output Plugs XLR3-31 type (balanced), PHONE (balanced) Frequency Response 38Hz – 30kHz Dimensions (W x H x D) 250mm x 390mm x 334mm Weight 10.2kg 

Weight 10.20 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA HS-8-W Studio Monitor White (Piece)”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA HS-8-W Studio Monitor White (Piece) removeADAM S3X-V Active Studio Monitor 250W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM A7X Active Studio Monitor 100W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
NameYAMAHA HS-8-W Studio Monitor White (Piece) removeADAM S3X-V Active Studio Monitor 250W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM A7X Active Studio Monitor 100W removeRCF MYTHO 8 ACTIVE TWO-WAY 8" DSP MONITORING SYSTEM remove
Image
SKUH000.00137S3XV8130A040050A7XMYTHO8
Rating
Price Original price was: €332.00.Current price is: €313.94. incl. GR VAT Original price was: €2,292.42.Current price is: €2,197.73. incl. GR VAT Original price was: €830.79.Current price is: €725.51. incl. GR VAT Original price was: €181.90.Current price is: €155.00. incl. GR VAT Original price was: €804.75.Current price is: €765.00. incl. GR VAT Original price was: €1,302.00.Current price is: €976.50. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

2-way bass-reflex bi-amplified nearfield studio monitor with 8' cone woofer and 1' dome tweeter
38Hz - 30kHz frequency response
75W LF plus 45W HF bi-amp system for high-performance 120W power amplification
ROOM CONTROL and HIGH TRIM response controls
XLR and TRS phone jack inputs accept balanced or unbalanced signals

Type Studio monitor nearfield Woofer 8'' Midrange - Tweeter 1' dome Amplifiers Power 120W (LF:75W, HF:45W) Input/Output Plugs XLR3-31 type (balanced), PHONE (balanced) Frequency Response 38Hz - 30kHz Dimensions (W x H x D) 250mm x 390mm x 334mm Weight 10.2kg 

PRICE PER UNIT

 

S3X-V

Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.

A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.

Reviews: "Wonderfully detailed...”

“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)

“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)

Woofer
Number1
Basket Ø9" (228 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number1
Basket Ø4.5" (116 mm)
Voice coil Ø1" (25 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response32 Hz - 50 kHz
THD > 80 Hz≤0.6 %
Long term output≥114 dB
Max. peak≥124 dB
Crossover frequencies350 / 2800 Hz
Input impedance10 KOhm
Weight34 lb (15,4 kg)
Magnetically shieldedOptional
Height x Width x Depth19" (485 mm) x 11" (281 mm) x 11.5" (295 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

 

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mid-Woofer
Number1
Basket Ø7" (175 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response42 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥106 dB
Max. peak≥114 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight20.3 lb (9,2 kg)
Magnetically shieldedNo
Height x Width x Depth13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
 

Acoustical Specifications
Frequency Response -3 dB:35 Hz÷ 20 kHz
Max SPL:116 dB 
Horizontal coverage angle:110° 
Vertical coverage angle:70° 
Compression Driver:1" neo, metal dome 
Woofer:8" neo, ICC technology 
INPUT/OUTPUT SECTION
Input connectors:combo XLR/Jack 
Input sensitivity:-6/+6 dBu 
PROCESSOR SECTION
Crossover frequencies:1800 Hz 
Protections:thermal, excurs., rms 
Limiter:soft limiter 
Controls:bass tilt, roll-off, treeble tilt, desktop, DSP controlled 
AMPLIFIER SPECIFICATIONS
High frequencies:100 Watts 
Low frequencies:200 Watts 
Cooling:convection 
Connections:vde 
CABINET
Cabinet Material:die cast aluminum 
Hardware:orientation adjustable stand 
PHYSICAL SPECIFICATIONS
Height:430/17 mm/inch 
Width:310/12.2 mm/inch 
Depth:300/11.8 mm/inch 
Net Weight:16.150/35.60 Kg/Lbs

 

Weight10.20 kg16.00 kg8.60 kg3.50 kg10.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.20 kg
Weight 16.00 kg
Weight 8.60 kg
Weight 3.50 kg
Weight 10.00 kg
Weight 20.00 kg