Content |
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.
Yamaha's new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
|
The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.
Specification Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206
|
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
F-1300B (indoor, black, 8 ohm)
F-1300W (indoor, white, 8 ohm)
F-1300BT (indoor, black, 70V)
F-1300WT (indoor, white, 70V)
F-1300BTWP (outdoor, black, 70V)
F-1300WTWP (outdoor, white, 70V)
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area. The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket
Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)
| Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket |
Reviews
There are no reviews yet.