YAMAHA IS-1215 Passive subwoofer 1400 Watt

3,085.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
Submit Better Price
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new […]

 

Read more

Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.

Yamaha\’s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
  

  • High power subwoofer.
  • Dual woofers can be switched for discrete drive (IS1215 and IS1218).
  • Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
  • Durable black or white finish (can be painted to match any interior).
  • Optional matching array frame available (for IS1118 and 1218 only).
  • Parallel-wired Neutrik NL4 and barrier strip connectors.
Drive Mode Parallell/Discrete
Frequency Range (-10 dB) 40 Hz-2.5 kHz
Power Rating (Parallel) NOISE: 1400W; PGM: 2800W; MAX: 5600W
Power Rating (Discrete) NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2
Nominal Impedance Parallel: 4 ohms; Discrete: 2 x 8 ohms
Sensitivity (1 W@1 m) SPL Parallel: 97dB; Discrete: 100dB
Calculated Peak SPL Parallel: 134dB; Discrete: 134dB
Calculated Continuous SPL Parallel: 128dB; Discrete: 128 B
Components 2x 15″ woofer, 4″ voice coil
Shape Rectangular
Material 3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch
Grill 16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam
Connectors 1 x Neutrik NL4 and barrier strip, wired in parallel
Flying Hardware 12 x M10 for shoulder eyebolts
Handle Four
Dimensions (H x W x D) 34.8″ (883 mm) x 17.6″ (448 mm) x 24″ (610 mm)
Weight 139 lbs (63 kg)
Weight 45.00 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA IS-1215 Passive subwoofer 1400 Watt”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsYAMAHA IS-1215 Passive subwoofer 1400 Watt removeHK AUDIO IL-115 SUB Installation Line Speaker 600W removeAMERICAN AUDIO SENSE-15B SUBWOOFER IN WOODEN CABINET 15'' 450W / 8 Ohm removeJB Systems Vibe 15 SUB MK II Passive SUB 400W RMS 15'' removeDYNACORD SUB-115 Subwoofer 500 Watts removeLD SYSTEMS LDESUB15G3 Stinger 15" Subwoofer Passive 600W RMS remove
Image
SKUH000.00072IL115360056SOSUB018SUB-115LDESUB15G3
Rating
Price 3,085.00 incl. GR VAT 770.00 incl. GR VAT425.38 incl. GR VAT 348.43 incl. GR VAT 1,296.42 incl. GR VAT 519.55 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

In stock

In stock

AvailabilityIn stockIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Passive 15" bass-reflex PA subwoofer
  • 600 watts RMS
  • 127 dB maximum sound pressure level
  • Deep bass down to 40 Hz through 15" custom design Woofer
  • Speaker In, Satellite Out, Sub Thru sockets
  • Can be used horizontally or vertically
  • 18 mm plywood cabinet with extremely durable polyurea coating
  • Easy handling through ergonomic handles and stacking dimples
  • Shock-resistant front grille to protect the loudspeaker.
  • Insert for M20 threaded poles
  • Clever transport accessories
Content

Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.

Yamaha\'s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.   
  • High power subwoofer.
  • Dual woofers can be switched for discrete drive (IS1215 and IS1218).
  • Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
  • Durable black or white finish (can be painted to match any interior).
  • Optional matching array frame available (for IS1118 and 1218 only).
  • Parallel-wired Neutrik NL4 and barrier strip connectors.
Drive Mode Parallell/Discrete
Frequency Range (-10 dB) 40 Hz-2.5 kHz
Power Rating (Parallel) NOISE: 1400W; PGM: 2800W; MAX: 5600W
Power Rating (Discrete) NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2
Nominal Impedance Parallel: 4 ohms; Discrete: 2 x 8 ohms
Sensitivity (1 W@1 m) SPL Parallel: 97dB; Discrete: 100dB
Calculated Peak SPL Parallel: 134dB; Discrete: 134dB
Calculated Continuous SPL Parallel: 128dB; Discrete: 128 B
Components 2x 15" woofer, 4" voice coil
Shape Rectangular
Material 3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch
Grill 16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam
Connectors 1 x Neutrik NL4 and barrier strip, wired in parallel
Flying Hardware 12 x M10 for shoulder eyebolts
Handle Four
Dimensions (H x W x D) 34.8" (883 mm) x 17.6" (448 mm) x 24" (610 mm)
Weight 139 lbs (63 kg)

HK Audio IL-115 SUB Installation Line

A compact, direct-loaded subwoofer packing powerful bottom end punch, the IL 115 Sub delivers naturalsounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82, IL 8.1 and IL 12.2 cabinets. Built-in Hi-cut filter.
 
Accessories N/A
 
 
  Details The IL 115 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1, IL 12.2 and IL 15.2 in the bass range. It is equipped with a direct loaded 15“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 115 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 20 m depending on sound pressure requirements. A controller is not required for operating the IL 115 Sub. It is possible, however to use the Digital Field Controller (DFC).
 
 
  Special features Housing principle: Bass reflex

 

 
  Power handling capacity
RMS: 600 W
Program: 1200 W
Peak (10 ms): 2400 W
 
  Dimensions
(wide x tall x deep)
21-1/4" x 17-7/8" x 24-7/8“
54 cm x 45,5 cm x 63 cm
 
  Weight 63.8 lbs
29 kg
 
  Service articles
  • 15“-speaker E994122
  • SPECIFICATIONS

    - Woofer: 15” AA PA15000, aluminum basket, 100mm Voicecoil
    - Power Handling
      450W continuous
      900W program
      1800W peak
    - Recommended input power: 300-600 W @ 8Ohm
    - Components: 15” Long excursion woofer
    - Sensitivity (Half Space):
      102dB SPL
      135dB Peak
    - Freq. response: (-3dB): 45Hz - 200Hz
    - Freq. range(-10dB): 40Hz - 250Hz
    - Impedance: 8Ohm
    - Finish: black structure paint
    - Protective Grid: powder coated steel grill with acoustic foam
    - Connector: 2x NL4 Speaker
    - Handle: 2 handles on the sides
    - Pole mount: integrated (M20)
    - Cabinet: plywood
    - Dimensions (LxWxH): 430x550x550mm
    - Weight: 26,5kg

    FEATURE OVERVIEW
    - Perfect harmonized components and case details
    - High efficiency
    - First class mechanical manufacture for day-to-day operations
    - Equipped with optimized 15” LF driver
    - Large optional accessory range
    - Ideal for mobile and install applications

    Παθητικό subwoofer με 15” woofer, ισχύος 400W RMS / 800W peak στα 8Ω. Ευαισθησία 96dB, max spl 124db, τεχνολογία bass reflex. Διαθέτει φωλιά στο πάνω μέρος για την τοποθέτηση σωλήνα στήριξης δορυφόρου, frequency response: 40Hz-300Hz, βάρος: 35Kg.

     

    Χαρακτηριστικά:

    • Μικρό σε όγκο για τα δεδομένα του (15” speaker) sub-woofer κατάλληλο για χρήση σε μόνιμες εγκαταστάσεις όπως café, club, discotheque, pub καθώς και φορητή χρήση
    • Ιδανικό ηχείο subwoofer για φορητές εγκαταστάσεις, djs και εταιρίες ενοικιάσεων
    • Δυνατότητα αναβάθμισης σε αυτοενισχυόμενο subwoofer εύκολα και απλά, προσθέτοντας την ενισχυτική βαθμίδα AVM-2 (δεν περιλαμβάνεται)
    • Για την σωστή χρήση του subwoofer απαιτείται τελικός ενισχυτής ο οποίος να έχει ισχύ εξόδου 450W RMS στα 8Ω
    • Τέλειος συνδυασμός του subwoofer VIBE15-SUB Mk2 με τα ηχεία VIBE10 Mk2 or VIBE12 Mk2 για δορυφόρους
    • Ειδική βαφή με μπογιά πολυουρεθάνης για αντοχή στις γρατζουνιές
    • Μεταλλική σήτα με επίστρωση ειδικού ακουστικού αφρού για ένα όμορφο οπτικά ηχείο και την προστασία των υλικών του speaker από σκόνες, χτυπήματα, υγρασία, σταγόνες νερού
    • 35mm εσωτερική φωλιά στο πάνω μέρος για την τοποθέτηση του σωλήνα στήριξης του δορυφόρου
    • High Power 15inch Woofer με ALU basket
    • Ειδικές υποδοχές στο πίσω μέρος του sub woofer για την τοποθέτηση ροδών μεταφοράς (δεν περιλαμβάνονται)
    • Ισχύς: 400Wrms (800Wpeak)
    • Input impedance: 8Ω
    • Input Sensitivity: 96dB 1W/1m
    • Max. SPL: 124dB
    • Frequency response: 40 - 300Hz
    • Διαστάσεις: 440 x 595 x 605 mm
    • Βάρος: 35kg

     

    DYNACORD΄s SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer. The new High-Speed-Laminar-Vent system (patent pending) shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered PowerSub 315 and can directly be connected to the PowerSub 315 for an extended bass fundament. For this application you have to shift the PowerSub 315ʼs ʽMODE SWITCHʼ to the position ʽINTERNAL+EXTERNAL 2*500Wʼ.The SUB 115 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORDʼs D12, can therefore be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. You just have to connect the SUB 115 and the fullrange cabinet with a regular Speakon cable. The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer΄s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits "soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.

     LD Systems STINGER SUB 15 G3 Passive 15” Bass Reflex PA Speaker This highly professional passive subwoofer is designed for absolute, long-term reliability. The Stinger® SUB 15 G3 provides 600 watts of continuous power; the maximum sound pressure level is 126 dB. Its specially developed 15" woofer also emits the deepest bass sounds with extremely powerful and clear contours. Designed as a real all-round workhorse, the strongly supported bass reflex cabinet is designed for horizontal and vertical use. It is made from robust 18 mm birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a thread insert for M20-extension tubes, stacking dimples and ergonomic handles. The Stinger® SUB 15 A G3 is an affordable solution for professional PA applications; extensive accessories support use on stage and in fixed installations.
    Product type
    PA subwoofer

    Type
    passive

    Low/mid driver dimensions
    15 "

    Woofer size
    381 mm

    Woofer magnet
    Ferrite

    Woofer brand
    Custom-made

    Woofer voice coil
    3 "

    Woofer voice coil (mm)
    76.5 mm

    Load rating (RMS)
    600 W

    Peak power
    1200 W

    Frequency response
    40 - Crossover Hz

    SPL (1W/1m)
    99 dB

    Max. SPL
    127 dB

    Impedance
    8 Ohm(s)

    Loudspeaker inputs
    1

    Speaker input connections
    Speakon compatible

    Loudspeaker outputs
    1

    Speaker output connections
    Speakon compatible

    Speakers per amplifier channel (DSP44/45K)
    3

    Cabinet material
    18 mm Plywood

    Cabinet surface
    Polyurea

    Cabinet construction
    Bass Reflex

    Width
    567 mm

    Height
    477 mm

    Depth
    624 mm

    Weight
    29,7 kg
    Weight45.0030.0050.9035.0034.0030.00
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 45.00 kg
    Weight 30.00 kg
    Weight 50.90 kg
    Weight 35.00 kg
    Weight 34.00 kg
    Weight 30.00 kg