YAMAHA MS45DR Monitor System for Electronic Drums

Original price was: €385.00.Current price is: €355.94. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Μonitor system 2.1 for Yamaha electronic drums compatible with 38.1-mm (1.5-inch) diameter pipes. Specifications: Output Power: Satellite Speakers: 20 W + 20W (2kHz, 4 Ohms), Subwoofer: 20 W (60 Hz, 8 Ohms) Frequency Response: Satellite Speakers/Subwoofer Speakers: 40-2000Hz (-10 dB) Speaker Unit: Satellite Speakers – Tweeter: 2cm (0.8”) dome (5 Ohms), Satellite Speakers – Midrange: […]

 

Read more

Μonitor system 2.1 for Yamaha electronic drums compatible with 38.1-mm (1.5-inch) diameter pipes.

Specifications:

  • Output Power: Satellite Speakers: 20 W + 20W (2kHz, 4 Ohms), Subwoofer: 20 W (60 Hz, 8 Ohms)
  • Frequency Response: Satellite Speakers/Subwoofer Speakers: 40-2000Hz (-10 dB)
  • Speaker Unit: Satellite Speakers – Tweeter: 2cm (0.8”) dome (5 Ohms), Satellite Speakers – Midrange: 8cm (3”) cone (4.5 Ohms), Subwoofer: 16cm (6.5”) cone (8 Ohms)
  • Dimensions (WxHxD):Satellite Speakers: 110 x 183 x 138 mm (4 5/16″ x 7 3/16″ x 13 1/2“), Subwoofer: 221 x 351 x 343 mm (8 11/16″ x 13 13/16″ x 12 1/2“)
  • Weight: Satellite Speakers: 1kg (2lbs, 3oz) x 2, Subwoofer: 6.5kg (14lbs, 5oz), Total: 8.5kg

Included: Pipe clamps (2) Can be attached to straight vertical pipes of 1.5-inch (38.1-mm) diameter., combination cable (8 pin mini DIN to phone and RCA pin) (1), cable band (1), power cord (1), Owner’s Manual (1)

Weight 9.00 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA MS45DR Monitor System for Electronic Drums”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA MS45DR Monitor System for Electronic Drums removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeADAM A7X Active Studio Monitor 100W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR remove
NameYAMAHA MS45DR Monitor System for Electronic Drums removeFOCAL Twin6 Be ACTIVE STUDIO MONITOR 3-way Near-field Shielded removeADAM A7X Active Studio Monitor 100W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeMACKIE HR624mk2 Monitor - Active Reference Monitor removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR remove
Image
SKUI990.00025Twin6 BeA7X8130A149.018Solo6 Be
Rating
Price Original price was: €385.00.Current price is: €355.94. incl. GR VAT1,675.00 incl. GR VAT Original price was: €804.75.Current price is: €765.00. incl. GR VAT Original price was: €830.79.Current price is: €725.51. incl. GR VAT Original price was: €827.76.Current price is: €499.00. incl. GR VAT Original price was: €1,053.49.Current price is: €995.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentΜonitor system 2.1 for Yamaha electronic drums compatible with 38.1-mm (1.5-inch) diameter pipes. Specifications:
  • Output Power: Satellite Speakers: 20 W + 20W (2kHz, 4 Ohms), Subwoofer: 20 W (60 Hz, 8 Ohms)
  • Frequency Response: Satellite Speakers/Subwoofer Speakers: 40-2000Hz (-10 dB)
  • Speaker Unit: Satellite Speakers – Tweeter: 2cm (0.8”) dome (5 Ohms), Satellite Speakers – Midrange: 8cm (3”) cone (4.5 Ohms), Subwoofer: 16cm (6.5”) cone (8 Ohms)
  • Dimensions (WxHxD):Satellite Speakers: 110 x 183 x 138 mm (4 5/16" x 7 3/16" x 13 1/2“), Subwoofer: 221 x 351 x 343 mm (8 11/16" x 13 13/16" x 12 1/2“)
  • Weight: Satellite Speakers: 1kg (2lbs, 3oz) x 2, Subwoofer: 6.5kg (14lbs, 5oz), Total: 8.5kg
Included: Pipe clamps (2) Can be attached to straight vertical pipes of 1.5-inch (38.1-mm) diameter., combination cable (8 pin mini DIN to phone and RCA pin) (1), cable band (1), power cord (1), Owner’s Manual (1)

The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 115dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 2x150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Visualization and control :

Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire

Woofer : 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker
Tweeter : TB871, Focal inverted dome tweeter in Beryllium
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight : 30.8lb (14kg)

 

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mid-Woofer
Number1
Basket Ø7" (175 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response42 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥106 dB
Max. peak≥114 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight20.3 lb (9,2 kg)
Magnetically shieldedNo
Height x Width x Depth13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

Weight9.00 kg14.00 kg10.00 kg8.60 kg12.25 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.00 kg
Weight 14.00 kg
Weight 10.00 kg
Weight 8.60 kg
Weight 12.25 kg
Weight 11.00 kg