YAMAHA MTX-5D Signal Processor

4,439.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
8ch mic/line input and 8ch analog output 16ch YDIF digital I/O 16ch Dante digital I/O 1x MY Card slot SD Card Slot for playback

 

Read more

  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • 16ch Dante digital I/O
  • 1x MY Card slot
  • SD Card Slot for playback
Weight 6.30 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA MTX-5D Signal Processor”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA MTX-5D Signal Processor removeELECTRO VOICE N8000 Digital Matrix Controller 300MIPS removeELECTRO VOICE DSP-1 N8000 Microprocesssor Expansion Module removeELECTRO VOICE CM-1 NetMax CobraNet Audio Network Module removePROEL Zone-8 Control system removeDBX ZONEPRO 1261 DIGITAL ZONE PROCESSOR remove
NameYAMAHA MTX-5D Signal Processor removeELECTRO VOICE N8000 Digital Matrix Controller 300MIPS removeELECTRO VOICE DSP-1 N8000 Microprocesssor Expansion Module removeELECTRO VOICE CM-1 NetMax CobraNet Audio Network Module removePROEL Zone-8 Control system removeDBX ZONEPRO 1261 DIGITAL ZONE PROCESSOR remove
ImagePROEL Zone-8 Control system
SKUH050.00034N8000001740CM1NETMAXH06PR00005DBX ZONEPRO 1261
Rating
Price 4,439.00 incl. GR VAT2,854.01 incl. GR VAT662.00 incl. GR VAT1,256.13 incl. GR VAT 1,099.00 incl. GR VAT 1,117.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

In stock

Only 1 left in stock

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderIn stockOnly 1 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • 16ch Dante digital I/O
  • 1x MY Card slot
  • SD Card Slot for playback

Audio Network    CobraNet CM-1 Module (optional)
CAN Bus Interface    2 x RJ-45
Cooling    Left-to-right, 3-stage fan
Data Format    24 Bit linear A/D and D/A conversion, 48 Bit processing
FIR-Drive    Yes
GPIO Control Port    2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing    2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS)
Network Control (IRIS-Net)    Yes
Network Interface    Ethernet-10/100 MBit/s, RJ-45
Power Consumption    90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply    100 - 240 VAC, 50/60 Hz
Sample Rate    48 kHz internal
Serial Interface    2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted)    115 dB
Total Harmonic Distortion    0.01 %
Height    2RU 88.1 mm (3.47“)
Width    483 mm (19.02“)
Depth    381 mm (15“)
Weight Net    7.37 kg (16.25 lbs)

    * Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.
    * 300 MIPS computing capacity - doubles the DSP power of a NetMax System Controller
    * Two RAM banks (512k x 24 Bit) - allow for additional delay lines up to 21.8 seconds
    * 48-bit signal processing.
    * Double precision DSP algorithms.
    * Automatic configuration - signals whether a new module has been inserted, or if one has been removed.

CobraNet is a network technology for multichannel transmission of digital audio data. The CM-1 is a compact interface module for NetMax to allow connection to a CobraNet network, which allows the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio output.

 

    * Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.
    * 100BASE-TX ethernet interface; 100Mbit/s full-duplex Ethernet interface; IEEE 802.3u compatible.
    * Secondary 100BASE-TX Ethernet interface. Second Ethernet interface for the connection of a redundant network to establish fault tolerant systems. Internal audio output interface for the transmission of 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length
    * Internal audio input interface for receiving 32 digital audio channels with 48 kHz sample rate and 16, 20, or 24-bit word length.
    * Control, monitoring, configuration, and firmware updates via Ethernet protocol.
    * Status LEDs. Link, activity, fault, and CobraNet conductor status indication via Ethernet connectors.

 

8-ZONE MUSIC AND ANNOUNCEMENT CONTROL SYSTEM ZONE8 is PROEL's answer for general or zone-selectable announcements and program material. It can manage up to 8 zones and can be configured to use a single amplification system for program material and announcements, or separate amplification for each. The ZONE8 accepts input from up to 18 different microphone control bases connected through a CAT5 interface, can be configured to accept announcement input from telephones through the internal exchange, and can be easily interfaced with alarm systems. Main features: - 5 selectable program material inputs: Tape, CD, Tuner, AUX1, AUX2 - Level control for announcement inputs - Program material level control - Program material routing selectors for each zone - 'BUSY' LED indicators for active announcements in each zone - Priority microphone input for emergency announcements.

dbx 1261 Overview

The ZonePRO 1261 from dbx is a digital zone processor that features twelve-channels of input and six-outputs. The unit is suitable for installation in restaurants, fitness centers, nightclubs and any other situation that requires multiple-zone control of audio sources with paging features. The ZonePRO 1261 has no front panel control and requires a computer for initial set-up.

The processor provides two balanced inputs on Euroblock terminals that are selectable as line or microphone level (with phantom power) along with eight pairs of analog RCA line inputs, with each pair internally summed to mono. An RCA coaxial S/PDIF digital input is also available. Outputs are available via Euroblock terminals and can be configured as either stereo or mono. A DB-9 connector is located on the front panel for connecting to a computer.

The included Windows based control software communicates with the unit via RS-232 or Ethernet. Processor blocks can be switched in or out of a chain and include input gain, high-pass filtering, parametric EQ, compression, limiting, gating, AGC, ducking, de-essing, AFS (Advanced Feedback Suppression), notch filters, signal routing, band-pass filtering, delay and polarity. An AutoWarmth module provides gentle bass boost compensation as signal levels are lowered.

The ZonePRO 1261 really shines when utilized with optional remote wall-mount controllers that can be positioned within the various zones. The wall-mounts are able to provide local volume control or scene selection, dependent on the type of controller installed. A built-in real-time clock can provide programmable system changes throughout the day or week. All program memory is non-volatile, ensuring program security in the event of power failure or computer malfunction.

Note: Stereo sources and stereo output can be configured using the control software, but input channels and number of zones available will be reduced correspondingly. Twelve-channel input, six-output zone processor with no front panel control Note: Each pair of RCA inputs is internally summed to mono. To maintain a stereo source, two sets of inputs need to be used Processing blocks available on both inputs and outputs Up to six zones can receive independent audio sources, with paging priority Note: Number of zones available will depend on whether mono or stereo output channels are required, with zones available decreasing by two for every stereo channel Local zone control is available utilizing the optional WC series of wall-mounted controllers Microphone input can have AFS (Advanced Feedback Suppression) inserted with fixed or live filter response “Autowarmth" module provides a bass-boost to low level signals AGC (Automatic Gain Control) maintains even levels Other dynamic DSP includes compression, limiting, noise gating and ducking Includes band-pass and crossover filters, notch filtering and parametric EQ Security lockout Computer control via RS-232 and Ethernet An analog input bus allows inputs from one unit to be sent to a another unit for application scalability
Frequency Response 20Hz to 20kHz, +/-0.5dB
Dynamic Range >110dB A-weighted, >107dB unweighted
Inputs Balanced Microphone and Line on Euroblock
16 x RCA phono (analog)
1 x RCA coaxial S/PDIF (digital)
Outputs Euroblock (6-outputs)
Input Impedance Euroblock: >50kΩ balanced, >25kΩ unbalanced, RF filtered
RCA: >25kΩ unbalanced, RF filtered
Output Impedance Balanced: 120Ω
Unbalanced: 60Ω
Maximum Input Level Mic/Line: +20dBu
RCA: +12dBu
Maximum Output Level +20dBu
Sample Rate 48kHz
Phantom Power +15V
Crosstalk (Main Outputs) >80dB
THD + N 0.003% typical at +4dBu @ 1kHz, 0dB gain
System Requirements For ZonePRO software:
1GHz or faster processor
Windows 2000/XP
256MB RAM (512MB recommended)
1024 x 768 or higher screen resolution
Dimensions (WxDxH) 19 x 5.75 x 1.75" (483 x 146 x 45mm)
Weight 6.8 lbs (3.1 kg)
In the Box
  • dbx ZonePRO 1261 - 12-Input / 6-Output Digital Zone Processor without Front-Panel Control
  • AC Power Cable
  • Null Moden Cable
  • Crossover Ethernet Cable
  • Software CD-ROM
  • Two (2) Year Warranty
Weight6.30 kg7.37 kg0.20 kg0.20 kg5.00 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.30 kg
Weight 7.37 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 5.00 kg
Weight 4.00 kg