YAMAHA NHB32C Digital audio transfer of up to 32 IN/32 OUT channels

Original price was: €5,815.89.Current price is: €5,801.35. incl. GR VAT

Only 2 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: NHB32C Category:
Digital audio transfer of up to 32 IN/32 OUT channels CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio […]

 

Read more

Digital audio transfer of up to 32 IN/32 OUT channels

CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio over four-bundle* paths – in real time.

* One bundle contains 8 channels of 20-bit audio, or 7 channels of 24-bit audio.

MIDI, head amp remote(AD824) and amplifier control

The NHB32-C is designed to handle not only digital audio, but also control data as well. With this function, the unit can be used for one of three types of control*: MIDI, head amp remote (for the AD824 A/D converter) or for monitoring/control of PC-N power amplifiers connected to the ACU16-C.

* Only one control type can be used at a time.

Up to sixty-four channels of audio – with one Ethernet cable

CobraNet handles up to eight bundles of digital audio in multicast (one-to-all) mode on a single CAT-5/100Base-TX cable.Up to eight NHB32-C units can be networked, with each unit transferring four bundles and receiving four bundles, and 64 channels of digital audio can be picked up from any ACU16-C or NHB32-C connected on the network via CobraNet. A networked system with ACU16-C and NHB32-C is able to handle up to 64 channels of digital audio with CobraNet technology. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth, more than 64 channels of digital audio data can be transferred on a network system.

Line duplication for good reliable system

Primary and Secondary CobraNet (TM) ports are built into the system, providing an easy-to-use duplicate network for reliable operation. If one system fails, the other takes over seamlessly, ensuring absolutely stable performance.

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA NHB32C Digital audio transfer of up to 32 IN/32 OUT channels”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA NHB32C Digital audio transfer of up to 32 IN/32 OUT channels removeDBX ZONEPRO 640M 6x4 Digital Zone Processor removeELECTRO VOICE DM-1 NetMax Dante Audio Network Module removeDBX ZONEPRO 641M Speaker Management System removeConnect 642 Pro - Matrix HDMI switch 4K - 4 in / 2 out removeYAMAHA ICP1 Control Panel για DME24/64N with LCD remove
NameYAMAHA NHB32C Digital audio transfer of up to 32 IN/32 OUT channels removeDBX ZONEPRO 640M 6x4 Digital Zone Processor removeELECTRO VOICE DM-1 NetMax Dante Audio Network Module removeDBX ZONEPRO 641M Speaker Management System removeConnect 642 Pro - Matrix HDMI switch 4K - 4 in / 2 out removeYAMAHA ICP1 Control Panel για DME24/64N with LCD remove
ImageConnect 642 Pro - Matrix HDMI switch 4K - 4 in 2 out
SKUNHB32CDBX ZONEPRO 640MDM-1DBX ZONEPRO 641M8386ICP1
Rating
Price Original price was: €5,815.89.Current price is: €5,801.35. incl. GR VAT Original price was: €943.28.Current price is: €849.00. incl. GR VAT1,256.13 incl. GR VAT Original price was: €819.28.Current price is: €736.99. incl. GR VAT Original price was: €200.00.Current price is: €171.00. incl. GR VAT Original price was: €1,018.21.Current price is: €1,015.66. incl. GR VAT
Stock

Only 2 left in stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 2 left in stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionWith this HDMI switch matrix 4K, you can connect 4 HDMI devices to 2 different TVs. Watch a different or the same image on 2 screens independently of each other. The remote control is used to switch between connected HDMI sources. The Connect 642 Pro supports resolutions up to 4K60 (4:4:4) and HDCP 2.2 and is therefore suitable for connection to your Ultra HD TV(s).
Content

Digital audio transfer of up to 32 IN/32 OUT channels

CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio over four-bundle* paths - in real time.

* One bundle contains 8 channels of 20-bit audio, or 7 channels of 24-bit audio.

MIDI, head amp remote(AD824) and amplifier control

The NHB32-C is designed to handle not only digital audio, but also control data as well. With this function, the unit can be used for one of three types of control*: MIDI, head amp remote (for the AD824 A/D converter) or for monitoring/control of PC-N power amplifiers connected to the ACU16-C.

* Only one control type can be used at a time.

Up to sixty-four channels of audio - with one Ethernet cable

CobraNet handles up to eight bundles of digital audio in multicast (one-to-all) mode on a single CAT-5/100Base-TX cable.Up to eight NHB32-C units can be networked, with each unit transferring four bundles and receiving four bundles, and 64 channels of digital audio can be picked up from any ACU16-C or NHB32-C connected on the network via CobraNet. A networked system with ACU16-C and NHB32-C is able to handle up to 64 channels of digital audio with CobraNet technology. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth, more than 64 channels of digital audio data can be transferred on a network system.

Line duplication for good reliable system

Primary and Secondary CobraNet (TM) ports are built into the system, providing an easy-to-use duplicate network for reliable operation. If one system fails, the other takes over seamlessly, ensuring absolutely stable performance.

The ZonePRO 640m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 640m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).

ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.

 

Front Panel LED Indicators

Per Output:4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters

Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute

Analog Inputs:

6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs

Type:Euroblock (Mic/Line), RCA (Source)

Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered

Impedance (RCA):>25kΩ Unbalanced, RF Filtered

Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA

CMRR:> 40dB, typically >55db @ 1kHz

Mic Pre Gain:30 to 60dB

Mic Input Noise (E.I.N.):

Mic Phantom Power:+15VDC

ANALOG OUTPUTS

Number of Outputs: 4 Total

Type:Electronically Balanced, RF Filtered Euroblock

Impedance:120Ω Balanced, 60Ω Unbalanced

Max. Output Level:+20dBu

A/D PERFORMANCE

Type: dbx Type IV™ Conversion System

Dynamic Range line: >113dB, A-weighted, >110dB unweighted

Type IV dynamic range:
>119dB, A-weighted, 22kHz
BW: >117dB, unweighted, 22kHz BW

Sample Rate: 48kHz

D/A PERFORMANCE

Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW

SYSTEM PERFORMANCE

Dynamic Range: >109dB A-weighted, >106dB unweighted, 22kHz BW

THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response: 20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk: >80dB typical

Crosstalk input to
output: >80dB

Propagation Delay 0.6 msec

POWER REQUIREMENTS

Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz

Power Consumption: 29 Watts

BTU:

Dante is a network technology for multi-channel transmission of digital audio data. The DM-1 compact interface module allows EV's NetMax System Controller to connect to a Dante network, enabling the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio outputs.

 

    * Designed for Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Pro Music, Stadium Systems, and other applications.
    * Gigabit primary and secondary Ethernet interfaces Typical latency: 1 mS Dante Zen device discovery Compatible with Dante Virtual Soundcard

The DBX ZonePRO™ 641M offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The DBX Zone PRO 641M features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 641M device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured.

AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The DBX ZonePRO™ 641M Digital Zone Processor Main Features Include:

  • 12 Inputs / 6 Outputs
  • 6 Balanced Mic/Line Inputs
  • 4 Unbalanced, Mono-Summed RCA Input Pairs
  • S/PDIF Input
  • Microphone Gain per Channel
  • Pre-Configured Architecture
  • Two Configurable Input Insert Positions
  • One Configurable Output Insert Position
  • AutoWarmth® per Output Zone
  • Link Bus
  • Comprehensive Signal Metering
  • Front Panel LCD
  • 9 User-Specified Front Panel Control
  • Optional ZC Controllers
  • Ethernet Control
  • Serial Control
  • Third Party Control
  • Wizard-Driven Configuration
  • Weight: 6.2 lbs / 2.81 kg
  • Dimensions: 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)
  • Connect 2 TVs or projectors and switch between 4 connected HDMI devices.
  • HDMI matrix switch allows you to watch other HDMI devices on 2 screens independently.
  • Use the built-in 1080p downscaler in case 1 or more screens do not support 4K resolution.
  • Suitable for the latest Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.
  • Supports Dolby Atmos and DTS:X and all other common audio formats.
  • With additional digital audio output to also connect your AV receiver using a single cable.
  • Supports Audio Return Channel (ARC) to avoid lip-sync problems.
  • Switches automatically and/or with remote control.
 

Connections

AV input 4 x HDMI
AV output 2 x HDMI
Digital audio output 1x Toslink (optical)

Video

Video resolution Max. 4K60 (3840 x 2160@60 Hz)
PC resolution Max. 2560 x 2048 Hz
Video bandwidth 18 Gbps
Clock frequency Max. 600 MHz
HDMI standard HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats
HDCP standard HDCP 2.2
Colour formats RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2
Colour depth Max. 36 bit

Audio

HDMI audio DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo
Optical Audio Dolby Digital/AC3, DTS 5.1 and PCM stereo

General

Dimensions (h x w x d) 18 x 242 x 104 mm
Weight 620grams
Power 100-240 VAC 50/60 Hz, 12 VDC adapter

Intelligent Control Panel, Wall-mountable.
The ICP1 intelligent control panel features controls virtually identical to those on the DME64N/DME24N
front panels, giving operators remote control capabilities for both DMEs. It offers unmatched ease of use
thanks to a large, easy-to-read backlit LCD display that shows names for scenes and function keys in 5
languages – Japanese, English, French, German and Spanish. The 6 function keys appearing at the top
and bottom of the LCD screen can be assigned to most parameters for easy remote control access.
These function keys are defined as a "function key set" or "page“. Up to 4 sets of "pages" are available –
for up to 24 parameters assignable to function keys. Users can change the "page" by pressing the
HOME key. A single function key can be used for simultaneous multiple parameter control by defining
parameter links. Function keys are defined with DME Designer software.

Weight5.00 kg4.00 kg0.20 kg3.00 kg0.62 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 4.00 kg
Weight 0.20 kg
Weight 3.00 kg
Weight 0.62 kg
Weight 0.20 kg