Content |
Subwoofer
Driver 25 cm (10”) cone
Output Power 250 W
Frequency Response 20–160 Hz
Advanced YST Yes
High-Efficiency Power Amplifier Yes
Twisted Flare Port Yes
BASS (Bass Action Selector System) Yes
Auto Standby Yes
Standby Power Consumption 0.3 W
System Connector Yes
Dimensions (W x H x D) 350 x 366 x 420 mm; 13-3/4” x 14-3/8” x 16-1/2”
Weight 18 kg; 39.7 lbs.
|
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
| Amplifier Output: 500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit 40 - 120Hz Variable
Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification: Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification: Class-D amplifier
Driver Compliment: 1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D) 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked) 22.56Kg (49.63lbs)
Mains Input Voltage: 100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance 20Kohms
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
imensions | Metric :14-1/4” W x 14-1/4” D x 14-1/10” H | 36.2 x 36.2 x 35.8 cm
Driver Complement :One high-definition 10" long throw woofer, pressure coupled to two 10” low bass radiators
Frequency Response :13 Hz – 200 Hz
Internal Amplifier Power :1500 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :70 lbs | 31.8 kg
Warranty :5 Years; 3 Years for Amplifiers
|
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Description | Active closed-box subwoofer system |
---|
Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | Amplifier |
| Power output: | 200W | Rated power consumption: | 40W / 0.5W standby | Input impedance: | 33kΩ | Signal / noise: | >90dB | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | Net weight | 12.5kg (27.6 lb) | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | |
Reviews
There are no reviews yet.