YAMAHA PX-3 2×500@4Ω Power Amplifier

Original price was: €1,006.00.Current price is: €929.25. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H060.00054 Category:
The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω. 2x 300W at 8Ω 2x 500W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible […]

 

Read more

The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.

  • 2x 300W at 8Ω
  • 2x 500W at 4Ω
  • Newly developed Class-D amplifier engine with a custom LSI
  • Flexible onboard PEQ, crossover, filters, delay, and limiter functions
  • Yamaha Speaker presets
  • Utlities for safe and secure operation

 

Weight 6.90 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA PX-3 2×500@4Ω Power Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA PX-3 2x500@4Ω Power Amplifier removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeELECTRO VOICE CPS2.4-II Installation Amplifier RCM-810 module 2 x 400 W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeAUDAC AUDPA152 2-channel Digital Power Amplifier 2 x 150 W remove
NameYAMAHA PX-3 2x500@4Ω Power Amplifier removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeELECTRO VOICE CPS2.4-II Installation Amplifier RCM-810 module 2 x 400 W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeAUDAC AUDPA152 2-channel Digital Power Amplifier 2 x 150 W remove
Image
SKUH060.00054E009274E003175004386E009273AUDPA152
Rating
Price Original price was: €1,006.00.Current price is: €929.25. incl. GR VAT Original price was: €863.20.Current price is: €830.00. incl. GR VAT Original price was: €650.00.Current price is: €592.00. incl. GR VAT753.99 incl. GR VAT Original price was: €738.39.Current price is: €710.00. incl. GR VAT Original price was: €409.19.Current price is: €376.95. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.

  • 2x 300W at 8Ω
  • 2x 500W at 4Ω
  • Newly developed Class-D amplifier engine with a custom LSI
  • Flexible onboard PEQ, crossover, filters, delay, and limiter functions
  • Yamaha Speaker presets
  • Utlities for safe and secure operation

 

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

CPS2.4-II Power Amplifier, 2 x 450W @ 4 Ohms, 2U, XLR/Phoenix Type Inputs, Barrier Strip Outputs, ready for optional IRIS-Net Remote Control Module,120V

 

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)

The DPA152 is built as two channel (Stereo) amplifier, capable of delivering a power of 2 x 150 Watt in stereo mode, or 300 Watt in bridged mono mode. It features various specific functions and advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors and signal link through with other amplifiers is possible using the XLR output connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode. The output connections are accommodated with both Speakon and Euro-Terminal blocks.

  • Model name: DPA152
  • 8 ohms: 2 x 80 W
  • 4 ohms: 2 x 150 W
  • 8 ohms Bridge: 300 W
  • THD+N:
  • Signal / Noise: > 100 dB
  • Frequency Response: 20 Hz - 20 kHz
  • Power Supply: 110 - 240 V AC / 50 - 60 Hz
  • Dimensions (W x H x D): 482 x 44 x 330 mm
Weight6.90 kg14.80 kg15.00 kg12.60 kg12.60 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.90 kg
Weight 14.80 kg
Weight 15.00 kg
Weight 12.60 kg
Weight 12.60 kg
Weight 5.00 kg