| Content | 99 Editable Presets: Exceptionally Easy Programming
Just select one of its 99 top-quality preset effects and you're ready to go. The
three most critical parameters for all effect programs are adjustable via rotary
panel controls. When you create a sound, press the Store button to register it
in the REV100 memory.
True Stereo Reverb
The REV100 actually has stereo inputs and outputs.
Superior Sound Quality
16-bit A/C and D/A converters and a 44.1 kHz sampling rate. The result is full
20 Hz to 20 kHz frequency response with exceptionally low noise and distortion.
Advanced MIDI Features
You can select effect programs via MIDI rather than the panel controls. You can
also use MIDI control change commands to actually change effect parameters |
Features
Enhance switch to restore spectral balance of compressed signal
Switchable Mode - Dual Channel or Stereo linked
Above or Below Threshold LEDs
Balanced XLR and Jack Inputs and Outputs
Intuitive, user friendly layout
Flawless performance
Innovation
The ARX COMPO? is a unique compressor/limiter designed for use in any
professional audio dynamics control application, packaged in a compact 1
RU chassis.The COMPO operates as two independent compressor/limiters,
with 'industry standard' variable Threshold, Ratio and Output gain controls.
A Stereo Link switch on the front panel lets both channels track as a stereo
pair in a Master/Slave configuration.
Enhance Switch
The COMPO features an 'Enhance' switch, which provides frequency restoration
to preserve the spectral balance of the audio signal, compensating for the sagging
Low and High frequency response of compressed program material.
The best way to think of it is as a 'smart' loudness control.
Wide Scale metering
There is comprehensive LED indication of all operating functions and status. Above
or Below Threshold LEDs on each channel give you instant visual confirmation of
compressor activity, as well as easy to read LED Gain Reduction meters.
Balanced Inputs and Outputs
On the rear panel, each channel has true differential Balanced inputs and outputs,
on both XLR and TRS jack connectors. Other features include an Active/Bypass
switch for each channel, and passive RFI filters on the inputs.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to
the unit via a removable power lead and standard 3 pin IEC connector, with built-in
fuse and voltage change switch.
ARX Quality
With its smooth compression, intuitive user friendly layout, high density precision
circuitry, and extensive user-variable operating parameters, the ARX COMPO is the
ideal installation 'set and forget' compressor, and is also equally at home in Studio,
Broadcast and Sound Reinforcement environments.
Every day, ARX Audio interface products solve audio problems for thousands of people
around the world.
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 22 dB
CMRR >60 dB, 20 Hz-20 KHz
Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 22 dB
Frequency Response 20Hz to 20KHz ±0.4dB
Signal to Noise ratio -85 dB Unweighted, -99 dB 'A' weighted
Distortion .02% THD @ 0dB,1KHz
Dynamic Range 107 dB
Enhance Section
Low Enhance 50 Hz, High Enhance 10 KHz
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm
Input/OutputConnector type XLR, Balanced Jack
Front Panel Controls
Channel A Active/Bypassed IN/OUT switch
Threshold, Ratio and Output Gain controls
Numbered marker panel for labelling compressor assigns
5 segment LED Gain Reduction display
Above/Below Threshold status LEDs
Enhance switch and status LED
Stereo link switch and status LED
Channel B controls identical to Channel A
Rear Panel Connectors
Balanced XLR Input and Output connectors.
Balanced TRS jack Input and Output connectors.
AC input connector, with voltage switch and fuse.
|
About the DI6s
It's a fact of audio life that a lot of equipment that has to be connected to
professional audio systems isn't impedance or level compatible.
Interfaces Unlimited
Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers,
bass guitars, computers; at some stage all these need linking up to Balanced
inputs, whether the application is Live sound, Studio or Broadcast.
To solve these problems, we've developed the DI-6s:
Six active D.I. (Direct Injection) boxes,
plus a 6 into 1 Line Mixer,
plus a 1 to 6 Splitter,
All of this in a compact, all steel 1 RU package.
A Pro Audio Toolbox
This unique and flexible audio toolbox allows Six independent unbalanced
audio sources to easily and quietly interface with Balanced pro audio systems,
either to individual channels or summed down to one Master output.
But that's not all. By pressing a single switch on the rear panel the DI6s will
change from being Direct Boxes and a Mixer to being a 6 way Splitter (line
distribution amplifier). Now it will split an incoming signal to 6 individual outputs
or zones.
On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity
(off) through 0dB to +15dB gain, and a Clip indicator LED.The Master section has
a Master volume control and status LEDs indicating whether the unit is in DI or
Splitter mode. In addition, as on all ARX single rack unit equipment, each channel
has a numbered marker panel ('scribble strip') you can write on for easy confirmation
of channel assigns.
Balanced Outputs
On the rear, each channel has an XLR Balanced output, with associated Ground lift
switch and status LED, to isolate the chassis and electronic grounds.
The Master section has both Balanced XLR and Unbalanced Jack outputs. In addition
there is a Balanced XLR input with a switch to put the unit in either DI or Splitter mode.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the
unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and
voltage change switch.
With so many handy functions, plus a true 'user friendly' layout, it's no wonder people call
the DI-6s 'A total Audio Patching System in 1 RU!'
You'll never compromise on Quality when you choose ARX
Features
Unique Pro Audio problem solver
Six Direct boxes, Splitter and Line Mixer in one unit
Multi mode unit: Six in, Six out; Six in, One out; One in, Six out
Individual Output Ground lift switches
Up to +15dB Gain available per channel
Balanced XLR Outputs; High Impedance Jack Ins and Outs
Flawless performance in any audio environment
T E C H N I C A L S P E C I F I C A T I O N S
Channels 1 - 6
High Z Input Impedance 2.2 Meg Ohm
Max Channel Gain 15dB
Clip LED Illuminates 1dB prior to clip
Direct Output Impedance 300 ohms Balanced
Max Input Level +20dB
Max Output Level +21dB
Signal to Noise -96dB(unity gain)
Frequency Response 20Hz to 20KHz, ±0.5dB
Distortion < 0.004%, 1KHz, +4dB
Output Connector 3 pin XLR
Master Section
Output Impedance 300 Ohms Balanced
Max Output Level +21dB
Signal to Noise -90dB (unity gain)
Frequency Response 10Hz to 20KHz, ±0.5dB
Distortion < 0.004%, 1KHz, +4dB
Output Connector 3 pin XLR
Splitter Section
Maximum Level + 20dB
Input Impedance 20 KOhms, Balanced
Input Connector XLR
Frequency Response 10Hz?20KHz ±0.5dB
AC Power 100-120, 220-240 V AC, 8 VA
Size 19?W x 6?D x 1??H, 482 x 155 x 44mm
Weight 2.2 Kg (5 lbs)
Front Panel Controls
Hi Impedance (Hi Z) insulated jack Input and Output
connectors
Level control with up to +15dB of Gain available
Clip LED indicator
Marker panels for labelling DI assigns
Master Level controls
Rear Panel
Balanced XLR Outputs
Individual Audio Ground Lift switches and status LEDs
XLR and jack Master Outputs
XLR Input for splitter
Splitter/DI + Mixer mode switch
AC input connector, with voltage switch and fuse. | 1231 Dual 31-Band Graphic Equalizer
The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.
SPECIFICATIONS:
| INPUT |
| Connectors: |
1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip |
| Type: |
Electronically balanced/unbalanced, RF filtered |
| Impedance: |
Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input Level: |
>+21dBu balanced or unbalanced |
| CMRR: |
>40dB, typically >55dB at 1kHz |
| OUTPUTS |
| Connectors: |
1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip |
| Type: |
Impedance-balanaced/unbalanced, RF filtered |
| Impedance: |
Balanced 200 ohm, unbalanced 100 ohm |
| Max Output Level: |
>+21dBu balanced/unbalanced into 2 kOhm or greater
>+18dBm balanced/unbalanced (into 600 ohm) |
| SYSTEM PERFORMANCE |
| Bandwidth: |
20Hz to 20kHz, +0.5/-1dB |
| Frequency Response: |
50kHz, +0.5/-3dB |
|
+/-15dB range |
+/-6dB range |
| Dynamic Range: |
109dB |
115dB |
| Signal-to-Noise: |
90dB |
97dB |
| THD + Noise: |
|
|
The latest addition to the 10 Series product line, the dbx® 1074 QuadGate™, is the perfect companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth and release controls on each channel. The 1074, like the rest of the products in dbx 10 Series, is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4” side-chain input. In addition to an external key input per channel, the 1074 also has an internal filter that can be independently activated and controlled on a channel-per-channel basis. This filter allows the 1074 to not only clean up tracks, but gives you frequency selective control on each gate, to open exactly when you want it to. These features combined, make the 1074 an absolute must for those who require quad gating on applications including: Gating dry and percussive sounds such as snare drum and kick drum,gating sounds that have longer decay times such as cymbals and Pianos, gating hum or buzz from live instruments or recorded tracks or eliminating Headphone leakage into microphones. Gating instrument microphones to eliminate amplifier bleed.
From the company that has been redefining the standard of signal processing for more than 30 years, dbx® Professional Products comes a bulletproof product that caters to the scrutinizing needs of those who require the precision noise gating capabilities. Once again, the engineering staff at dbx® Professional Products have taken technology that has been over three decades in the making and have created a product that is flexible, versatile and rock solid in construction design. The 1074ʼs independent channel design with key filtering capabilities make it the perfect tool for countless applications.
- Four independent channels of gating
- Independent key filtering
- Independent Threshold and Release controls
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Stereo Coupling mode
- Switchable +4dBu or -10dBv operation per channel
| Input Connectors | XLR (Pin 2 and tip hot) | | Input Type | Electronically balanced/unbalanced, RF filtered | | Input Impedance | Balanced > 50 kOhm, unbalanced >25 kOhm | | Max Input | > +22 dBu balanced or unbalanced | | CMRR | 40dB: Typically >55 dB at 1 kHz | | Key Input | Electronically balanced/unbalanced, RF fitered Balanced 50kOhm, unbalanced > 25 kOhm | | Output Connectors | XLR (Pin 2 hot) | | Output Type | Servo-balanced/unbalanced, RF filtered | | Output Impedance | Balanced 60 Ohm, unbalanced 30 Ohm | | Max Output | > +22 dBm balanced, > +20 dBm unbalanced | | Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB | | Frequency Response | 0.35 Hz to 200 kHz, +0/-3 dB | | Noise | | | Dynamic Range | > 115 dB, unweighted | | THD+Noise | 0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), | | Interchannel Crosstalk | | | Stereo Coupling | True RMS Power Summing | | Operating Voltage | 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz | | Power Consumption | 30 Watts | | Fuse | 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T | | Power Connector | IEC receptacle | | Unit Weight | 6.9 lbs. | | Shipping Weight | 9.3 lbs. |
|
iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?
With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.
? Advanced Feedback Suppression (AFS?)
? Type V? Noise Reduction
? PeakStopPlus? Limiting
? 2/3-octave Constant Q frequency bands
? Switchable boost/cut ranges of ±6 or ±15dB
? 18 dB per octave 40Hz low-cut filter
? ±12dB input gain range
? XLR, TRS and Euroblock Inputs and Outputs
? Internal Toroidal Transformer
? Frequency Response of 10Hz to 22kHz
? Dynamic range of greater than 113dB
? User Power Up Features
? Relay Bypass for Power Failure System Protection
|
Reviews
There are no reviews yet.