YAMAHA XH200 Installation Amplifier 2x200W

Original price was: €993.00.Current price is: €988.67. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Compact, Lightweight 200W + 200W Distribution Power Amp for Installed Systems The XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any installation. This […]

 

Read more

Compact, Lightweight 200W + 200W Distribution Power Amp for Installed Systems The XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any installation. This combination of high power output and small size has been realized through the use of an advanced switching power supply. The XH200 also features a monitor/remote connector that allows remote status monitoring and control from an external device.
Two 200W Channels In a 2U Power Amp
The XH200 is a two-channel high-output power amp that can be switched between 70V and 100V line operation (200W x 2 channels into 24ohms-70V / 48ohms-100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that the XH200 is significantly smaller and lighter than comparable amplifiers: it fits comfortably in a 2U rack space and weighs only 10 kg.

Monitor/Remote and Other Important Functions
A rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and a comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions.

Euroblock Input/Output Connectors, and Barrier Strip Output Connectors
Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 Hz or 80 Hz roll-off provide an extra margin of system flexibility.

Output power 70V line 200W x2; RL=50ohms
100V line 200 Wx2; RL=25ohms
Total harmonic distortion Less than 0.1% (40Hz-20kHz; Half Power)
Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Half Power)
Frequency response 0, +0, -0.5dB 80Hz-20kHz
S/N ratio More than 103dBu
Residual output noise Less than -65dBu
Crosstalk Less than -60dB
Voltage gain 38 dB (100 V), 35 dB (70 V)
Input sensitivity +4 dBu
Maximum input voltage +22 dBu
Processors HPF (40Hz/80Hz; 12dB/oct)
I/O connectors Line input / output ports Euroblock connector (balanced) /ch
Speaker output ports Barrier strip/ch
Control ports D-sub 15pin
Protection circuit Load protection POWER switch ON/OFF mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%)
Amplifier protection Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 2ohms)
Power supply protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 90°C)
Amplifier class EEEngine
Cooling Single variable-speed fan
Power requirements 120V, 230V or 240V; 50/60Hz
Power consumption 1/8 (4ohms/Pink noise) 400 W
Idle 40 W
Stand-by 5W
Dimensions Width 480mm; 18-7/8“
Height 88mm; 3-7/16“
Depth 412mm; 16-1/4“
Weight 10kg; 22lbs
Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “YAMAHA XH200 Installation Amplifier 2x200W”

Your email address will not be published. Required fields are marked *

Quick Comparison

YAMAHA XH200 Installation Amplifier 2x200W removeCROWN 160MA 60-Watt Mixer Amplifier removeTOA VM-3360VA Voice Alarm System Amplifier removeTOA VM-3240VA Voice Alarm System Amplifier removeTOA A-2120 120 Watt Amplifier removeTOA CA-115 35W Mobile Amplifier remove
NameYAMAHA XH200 Installation Amplifier 2x200W removeCROWN 160MA 60-Watt Mixer Amplifier removeTOA VM-3360VA Voice Alarm System Amplifier removeTOA VM-3240VA Voice Alarm System Amplifier removeTOA A-2120 120 Watt Amplifier removeTOA CA-115 35W Mobile Amplifier remove
Image
SKUXH-200160MAVM-3360VAVM-3240VAA-2120CA 115
Rating
Price Original price was: €993.00.Current price is: €988.67. incl. GR VAT Original price was: €565.14.Current price is: €481.00. incl. GR VAT Original price was: €3,104.23.Current price is: €2,794.01. incl. GR VAT Original price was: €2,545.67.Current price is: €2,291.00. incl. GR VAT Original price was: €384.39.Current price is: €348.00. incl. GR VAT Original price was: €124.20.Current price is: €112.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Compact, Lightweight 200W + 200W Distribution Power Amp for Installed Systems The XH200 is the ideal distribution power amp for use with numerous high-impedance speakers in theatre, hall, and conference facility installations. In addition to being remarkably lightweight, the XH200 is a compact 2U size that will fit comfortably in just about any installation. This combination of high power output and small size has been realized through the use of an advanced switching power supply. The XH200 also features a monitor/remote connector that allows remote status monitoring and control from an external device.
Two 200W Channels In a 2U Power Amp
The XH200 is a two-channel high-output power amp that can be switched between 70V and 100V line operation (200W x 2 channels into 24ohms-70V / 48ohms-100V). This high-impedance power amp is designed for installations in which multiple speakers are driven in parallel. A high-efficiency switching power supply means that the XH200 is significantly smaller and lighter than comparable amplifiers: it fits comfortably in a 2U rack space and weighs only 10 kg.

Monitor/Remote and Other Important Functions
A rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location. The front panel provides dB-calibrated detented attenuators for each channel, and a comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range of conditions.

Euroblock Input/Output Connectors, and Barrier Strip Output Connectors
Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection. High pass filters with switchable 40 Hz or 80 Hz roll-off provide an extra margin of system flexibility.

Output power 70V line 200W x2; RL=50ohms
100V line 200 Wx2; RL=25ohms
Total harmonic distortion Less than 0.1% (40Hz-20kHz; Half Power)
Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Half Power)
Frequency response 0, +0, -0.5dB 80Hz-20kHz
S/N ratio More than 103dBu
Residual output noise Less than -65dBu
Crosstalk Less than -60dB
Voltage gain 38 dB (100 V), 35 dB (70 V)
Input sensitivity +4 dBu
Maximum input voltage +22 dBu
Processors HPF (40Hz/80Hz; 12dB/oct)
I/O connectors Line input / output ports Euroblock connector (balanced) /ch
Speaker output ports Barrier strip/ch
Control ports D-sub 15pin
Protection circuit Load protection POWER switch ON/OFF mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%)
Amplifier protection Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 2ohms)
Power supply protection Thermal (Amplifier shuts down automatically; heatsink temp ≥ 90°C)
Amplifier class EEEngine
Cooling Single variable-speed fan
Power requirements 120V, 230V or 240V; 50/60Hz
Power consumption 1/8 (4ohms/Pink noise) 400 W
Idle 40 W
Stand-by 5W
Dimensions Width 480mm; 18-7/8“
Height 88mm; 3-7/16“
Depth 412mm; 16-1/4“
Weight 10kg; 22lbs

The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.

FEATURES

  • 4 inputs (each with a volume control), and one 60W amplifier output channel
  • Ideal for paging, background music, and music-on-hold
  • Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
  • Priority muting by VOX or external switch
  • Bass and Treble controls on master output
  • Three-Year, No-Fault, Fully Transferable
  • Warranty completely protects your investment and guarantees its specifications

The TOA VM-3000 Series is a highly cost-effective combined emergency voice alarm system and public address system. The VM-3000 Series is ideal for small and medium-sized applications, such as shopping centres, retail stores, nursing homes, schools and fitness clubs. It incorporates such emergency voice alarm functions as continuous speaker line monitoring and a built-in voice alarm. This easy to install and set-up, all-in-one system also offers PA broadcasting, paging and BGM functions that operate with uncompromisingly high audio quality to ensure consistently high intelligibility. The VM-3000 Series is digitally audio processed and controlled, with full digital audio mixing and a built-in high-quality electronic voice message feature. The system may be set up directly using the controls and LCD display on the front panel, also enabling easy operation of the system. Operational versatility is further enhanced by a dedicated software configuration capability for entering and updating settings via a PC.

Specification
Power Source AC mains, 50/60 Hz DC: 24 V DC
Power Consumption 850W
Rated Output 360W
Frequency Response 50 – 20,000 Hz, ±3dB (at 1/3 rated output)
Distortion Under 0.8% (at rated output, 1kHz)
Signal-to-Noise Ratio Over 85dB
Audio Input/Output
Characteristic
Sampling frequency: 48kHz
A/D D/A CONVERTER: 24bit
Input Input 1 – 3 : -50 dB (MIC)/-10dB (LINE) (changeable) 600Ω, electronically balanced combined XLR connector (female)/phone jack
Input 4: -50 dB (MIC)/-10 dB (LINE) (changeable) 600Ω, electronically balanced plug in screw connector
BGM 1 – 2 : -10 dB, 10kΩ RCA pin jack
External AMP Input: 100V Line plug in screw connector
Output Speaker output 1 – 2 : max (360w) per output
Speaker output 3 - 6 : max (120w) per output
Total with in 360W
Plug-in screw connector
Direct output : Direct output from internal or external amplifier
Plug-in screw connector
Recording output BGM / Paging : 0dB, 10kΩ, RCA pin jack
RM Link 1.2 in 2 RJ45 female connector for connecting the RM-300MF/RM-200M
Remote Microphone.
Maximum distance: RM1.2 Total 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Network I/F RJ45 female connector for switching hub or PC
10 BASE-T/100 BASE-TX Circuit (Selectable by automatic negotiation)
Maximum distance: 100m between this unit and a switching hub or PC
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
VM Link RJ45 female connector for connecting the VM-3240E or VM-3360E
Maximum distance : 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link RJ45 female connector for connecting the VP-2241 or VP-2421
Maximum distance : 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control In: 1 – 8/Out: 1 – 8 Plug-in screw connector
Input : No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 1 mA
Output : Isolated open collector output, withstand voltage: 30V DC, operating current: under 50 mA
Emergency Control In: 1 – 6/Status out RJ45 female connector
Input 1 – 5 : No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2 mA
Connection resistance to make the function: Inactive; 9.4kΩ ±5%/Active; 4.7kΩ ±5%
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%
Status out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA
ATT Control Plug In connector, relay contact, 30V DC, 125V AC 5A (AC/DC)
Power In/Out
PS Out/DC Power In
M4 Screw terminal distance between barriers 11 mm
This connector for connecting the VX-2000DS only
DC 28V/30A (operating range: 20 - 40V DC)
DC24V Output 24V DC ±10% Maximum feeding current 0.4A
DS Link RJ45 female connector for connecting the VX-2000DS
Maximum distance: 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Dimensions 482 (W) x 132.6 (H) x 460 (D)mm
Weight 19kg
Option Input transformer: IT-450

 

The TOA VM-3000 Series is a highly cost-effective combined emergency voice alarm system and public address system. The VM-3000 Series is ideal for small and medium-sized applications, such as shopping centres, retail stores, nursing homes, schools and fitness clubs. It incorporates such emergency voice alarm functions as continuous speaker line monitoring and a built-in voice alarm. This easy to install and set-up, all-in-one system also offers PA broadcasting, paging and BGM functions that operate with uncompromisingly high audio quality to ensure consistently high intelligibility. The VM-3000 Series is digitally audio processed and controlled, with full digital audio mixing and a built-in high-quality electronic voice message feature. The system may be set up directly using the controls and LCD display on the front panel, also enabling easy operation of the system. Operational versatility is further enhanced by a dedicated software configuration capability for entering and updating settings via a PC.

 

 

Specification
Power Source AC mains, 50/60 Hz DC: 24 V DC
Power Consumption 600W
Rated Output 240W
Frequency Response 50 – 20,000 Hz, ±3dB (at 1/3 rated output)
Distortion Under 0.8% (at rated output, 1kHz)
Signal-to-Noise Ratio Over 85dB
Audio Input/Output
Characteristic
Sampling frequency: 48kHz
A/D D/A CONVERTER: 24bit
Input Input 1 – 3 : -50 dB (MIC)/-10dB (LINE) (changeable) 600Ω, electronically balanced combined XLR connector (female)/phone jack
Input 4: -50 dB (MIC)/-10 dB (LINE) (changeable) 600Ω, electronically balanced plug in screw connector
BGM 1 – 2 : -10 dB, 10kΩ RCA pin jack
External AMP Input: 100V Line plug in screw connector
Output Speaker output 1 – 2 : max (240w) per output
Speaker output 3 - 6 : max (120w) per output
Total with in 240W
Plug-in screw connector
Direct output : Direct output from internal or external amplifier
Plug-in screw connector
Recording output BGM / Paging : 0dB, 10kΩ, RCA pin jack
RM Link 1.2 in 2 RJ45 female connector for connecting the RM-300MF/RM-200M
Remote Microphone.
Maximum distance: RM1.2 Total 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Network I/F RJ45 female connector for switching hub or PC
10 BASE-T/100 BASE-TX Circuit (Selectable by automatic negotiation)
Maximum distance: 100m between this unit and a switching hub or PC
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
VM Link RJ45 female connector for connecting the VM-3240E or VM-3360E
Maximum distance : 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link RJ45 female connector for connecting the VP-2241 or VP-2421
Maximum distance : 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control In: 1 – 8/Out: 1 – 8 Plug-in screw connector
Input : No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 1 mA
Output : Isolated open collector output, withstand voltage: 30V DC, operating current: under 50 mA
Emergency Control In: 1 – 6/Status out RJ45 female connector
Input 1 – 5 : No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2 mA
Connection resistance to make the function: Inactive; 9.4kΩ ±5%/Active; 4.7kΩ ±5%
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%
Status out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA
ATT Control Plug In connector, relay contact, 30V DC, 125V AC 5A (AC/DC)
Power In/Out
PS Out/DC Power In
M4 Screw terminal distance between barriers 11 mm
This connector for connecting the VX-2000DS only
DC 28V/20A (operating range: 20 - 40V DC)
DC24V Output 24V DC ±10% Maximum feeding current 0.4A
DS Link RJ45 female connector for connecting the VX-2000DS
Maximum distance: 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Dimensions 482 (W) x 132.6 (H) x 460 (D)mm
Weight 18kg
Option Input transformer: IT-450

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg

 

  • Easy installation in practically any 12V battery equipped car.
  • Compact, rugged construction and front panel controls.
  • Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
  • Unidirectional dynamic microphone with talk switch.

Specification
Power Source Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used)
Power Consumption 2.2A or less at rated power output.
Output Power Rated 15W, max. 35W
Output Impedance 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections.
Distortion Less than 5% (at 1kHz rated output)
Frequency Response 100 ~ 10,000Hz
Input Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack
Dimensions (W x H x D): 178 x 50 x 132mm (mounting device excluded)
Weight 900g
Finish Front panel; ABS resin, Black
Case; Zinc plated steel sheet
Accessory Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (4A) ... 1
Connection cord ... 1 set
Accessory Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa)

Weight10.00 kg3.70 kg19.00 kg18.00 kg10.00 kg0.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 3.70 kg
Weight 19.00 kg
Weight 18.00 kg
Weight 10.00 kg
Weight 0.90 kg