| Content |
The highly flexible Zoom LiveTrak L-20 is a 20-input digital mixer and multi-track recorder, well suited for live performances, studio recording, band rehearsals, podcasts, and more. The mixer features 16 mono channels, each with combo mic/line XLR-1/4" inputs with high gain, low-noise microphone preamps, +48V phantom power, and a single compression knob, while the two stereo inputs offer dual 1/4" and RCA inputs. Channels 1-2 also offer Hi-Z inputs for connecting guitars and basses. All channels work with the on-board channel strip, which provides a low-cut filter, a 3-band EQ, a pan control, and two send FX for sending signals to the 20 built-in high-quality effects processor with two dedicated EFX Return channels.
The LiveTrak L-20 features balanced XLR main outputs, while the six monitor outputs utilize balanced TRS 1/4" connectors, each with the ability to set up customized mixes. Simply connect your headphones or a stage monitor and adjust the levels to taste. There are nine snap-shot presets, which allow you instant recall of different setups and sessions.
The built-in SD recorder can simultaneously record every channel and the master fader stereo signal output for a total of 22 tracks at resolutions up to 24-bit/ 96 kHz. Files can easily be copied to a computer and used in a DAW. In addition, overdubbing and punching in/out can be done as expected when using the unit as a multi-track recorder. The L-20 can also function as a 22-in/4-out USB audio interface, allowing you to record directly to your favorite software DAW or to iOS devices. Other notable features include 12-segment LED meters on all channels, a built-in metronome, and a built-in slate mic for identifying takes. The Zoom LiveTrak L-20 ships with a power cord and a USB cable.
- 20 Discrete channels
- 16 Mono plus 2 stereo channels with XLR and 1/4" phone jacks
- Simultaneous recording of 22 tracks
- Playback of 20 tracks
- USB audio interface with 22 inputs and 4 outputs
- Audio recording up to 24-bit / 96 kHz on SD storage media
- 48V Phantom power
- Hi-Z Connectors (channels 1-2)
- 26 dB Pad (channels 3 to 16)
- Compressor per channel with one knob (channels 1 to 16)
- Solo and mute buttons for each channel
- Low cut per channel between 40 - 600 Hz variably adjustable
- Total outputs and six configurable monitor outputs
- Monitor outputs can be configured as headphone output or normal line-level output
- Additional separate headphone output
- Memory function for up to nine mixer scenes
- 20 Internal, editable chorus, delay and reverb effects
- Two effect buses
- Integrated talkback microphone
- Pre-record function
- Class-compliant operation (for iOS compatibility)
- Automatic start and stop recording possible
- Import and export of projects via the USB 2.0 interface
- Compatible functions for the ZOOM FS01 footswitch
- Dimensions (W x D x H): 445 x 388.4 x 82.6 mm
- Weight: 3.71 kg
- Includes power supply (AD-19), USB 2.0 cable and quick start guide
|
The new Fostex FR-2 has been designed specifically for location sound recording; high quality sound effects acquisition; TV & radio documentary; in fact any application where quality audio recording is required.
With excellent quality (up to 24-bit / 192KHz recording - a first for a CF recorder), huge feature list and a cost-effective price point, the FR-2 offers users of portable DAT and other formats the opportunity to make the switch to a more flexible, higher quality audio acquisition machine without sacrificing features.
- Recording industry standard, PC-compatible BWF files (stereo/mono) on a FAT32 media format
- Up to 24-bit/192kHz uncompressed recording
- Includes a unique 22.05kHz sampling frequency setting for extended recording
- Records to both Type I & II CompactFlash cards and PCMCIA 1.8” hard disk drives*1
- Fostexʼs "File per Take” system with auto scene & take naming/increment
- Two balanced XLR microphone inputs with switchable phantom power and top quality, high headroom mic pre-amps
- 132 x 64 dot matrix LCD screen for ease of use & high visibility in the field
- Uses AA-sized rechargeable NiMH batteries which are widely available due to the popularity of digital cameras. 8 AA cells will provide approximately 2.5 hours operation when recording to a CF card
- Easy file transfer to PC/Mac via PCMCIA, CF adaptor or standard on-board USB connection for data editing and/or backup*2
- Quick and easy on-board file naming or via external keyboard through standard USB keyboard port
- “Pre-record” loop buffer of approximately 10 seconds*3
- Easy software update via CF or PCMCIA card with downloads from the internet
- Optional timecode generator / reader card
Notes
*1 May require software update for PCMCIA HD operation
*2 Complies with Windows ME/2000/XP, Mac OS 10.2 or higher
*3 Varies depending on sampling frequency“
- GENERAL
Recording Media CompactFlash card, PCMCIA HD
Recording Format BWF
Number of Channels Stereo / Mono
Sampling Frequency 22.05 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Quantization 16 bit (22.05 - 48kHz), 24 bit (44.1 - 192kHz)
- PHYSICAL
Power Requirement 8 x AA type dry cell (NiMH recommended)
AC adaptor (optional)
DC 12V
Power Consumption approx. 5W
Dimension 250(W) x 77(H) x 220(D) mm
Weight 1.5kg (w/out battery)
- PERFORMANCE
R/P Frequency Response 20Hz to 10kHz +/-1dB (fs: 22.05kHz)
20Hz to 20kHz +/-1dB (fs: 44.1 / 48kHz)
20Hz to 40kHz +/-2dB (fs: 88.2 / 96kHz)
20Hz to 80kHz +/-3dB (fs: 176.4 / 192kHz)
S/N (ADC-DAC, 24-bit, ref: -20dB, fs:48kHz)
Line (input gain: +4dBu): 100dB (typical)
Mic: (input gain: -60dBu): 87dB (typical)
Dynamic Range 100dB (ADC-DAC, 24bit, ref:-20dB, fs:48kHz) typical
T.H.D. (ADC-DAC, 24-bit, ref:-20dB, fs:48kHz)
Line (input gain: +4dBu): Less than 0.005% (at 1kHz, -1dB typical)
Mic (input gain: -60dBu): Less than 0.008% (at 1kHz, -1dB typical)
Power Life approx. 2 hours 30 min. (8 x AA NiMH type/2300mAH)
- INPUT / OUTPUT CONNECTORS
ANALOG AUDIO INPUT L/R
Connector XLR-3-31 type (Pin2: Hot)
Line Input Impedance : More than 6k ohm
Reference Input Level +4dBu
Maximum Input Level +24dBu (Trim: +4dBu, at the prefader stage)
MIC
Input Impedance More than 6k ohm
Input Level -60dBu
Maximum Input Level -40dBu (Trim: +4dBu, at the prefader stage)
Phantom Power P48
ANALOG AUDIO OUTPUT L(Mono)/R
Connector RCA pin type
Output Load Impedance more than 10k ohm
Nominal Output Level +4dBu
HEADPHONE OUTPUT 50 + 50mW (32 ohm)
Max Speaker Output Level 1W
DIGITAL INPUT/OUTPUT (except for 176.4, 192kHz)
Connector XLR
Input Format S/P DIF / AES/EBU automatic
Output Format S/P DIF / AES/EBU switchable
USB x 2 (keyboard / PC only)
TIMECODE CARD (OPTIONAL, T.B.A.)
LTC Input/Output LEMO
Frame Rate 23.976/24/25/29.97DF/29.97ND/30DF/30ND
Gen Mode 24H RUN / REC RUN / FREE RUN / EXT RUN
|
- 16 Recording Tracks to Hard Drive: 16-bit resolution at 44.1 kHz - no compression
- Extended Recording Time: More than 7.5 hours of 16-track recording at CD quality
- FAT32 Disc Format and WAV Recording: Plus USB port for easy transfer of recordings to PC
- Input EQ Library: 33 sound shaping presets available for all inputs
- Direct CD-RW Connection via USB: Master direct to USB CD-RW (no PC required)
| Un-beatable Audio Performance Comes Home to Roost - Meet the Korg MR-2000S!
Korg captured the world's attention with their MR series of DSD mobile recorders and studio tools. After consulting with top recording and mastering professionals, Korg has now created the Korg MR-2000S Studio Recorder; a 2-track mixdown designed from the ground up to bring that same DSD sonic performance home for use in any studio environment.
A DSD and Mastering Recorder Born to Run
In keeping with the MR Series studio recorder heritage of portability, the MR-2000S 1- bit recorder adds a number of new features to meet the requirements of the most demanding studio, yet retains a sleek, single rack-space profile. This compact format is also ideal for any live recording rig; or for grabbing that "off-the-board" live recording night after night - as well as shuttling your recordings from venue to studio and back again. So whether you want to capture that once-in-a-lifetime performance with impeccable detail, or need to transfer those priceless recordings from session to session, the MR-2000S high-resolution audio recorder is ready to roll.
SPECIFICATIONS:
Main Sections
Recorder section
Number of tracks: 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
Recording formats
-PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @ 24 bit, 192 kHz @ 24 bit
-1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit,DSDIFF format (extension .dff), DSF (extension .dsf),WSD (extension .wsd)
-mp3 audio format(playback only): 44.1kHz/32kbps - 320kbps
Recording
Maximum approximately: 120 hours at 44.1 kHz/16 bit, 14.5 hours at 5.6 MHz/1- bit (for 80 Gbyte hard disk), Maximum continuous recording 6 hours
Number: Recognizes a maximum of projects four hundred projects of each format
Mark points: 100 points per project *No mark names
USB functionality: Connect to computer via USB 2.0, usable as FAT32 USB external drive
Project editing: Rename, Delete, Protect
General
Display: 160 x 104 pixel, LCD with backlight
Level meter: -54dBFS – 0dBFS (PC audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 21/23-step LED + peak LED
Power supply: AC100 –240 V
Power consumption: 20 W
Dimensions/Weight: 18.9“(W) x 8.6“(D) x 1.7“(H):Including protrusions/6.17 lbs
Main Specifications
Frequency response: 10 Hz ... 20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz ... 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz, 10 Hz ... 100 kHz (1-bit)
S/N: 103 dB (typical) @ IHF-A
THD+N: 0.005% (typical), 20 Hz ... 20 kHz
A/D conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
D/A conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
Line In L/R
XLR
-Connector: XLR-3-31 type (balanced)
-Input impedance: 22 k Ohms
-Nominal level: + 4 dBu (REC LEVEL=0dB)
-Maximum level: + 24 dBu
RCA
-Connector: RCA (Unbalanced)
-Input impedance: 50k Ohms
-Nominal level (– 12 dBFS – 12 dB-SACD):
–6 dBV (REC LEVEL = 0 dB)
-Maximum level: + 10 dBV
Line Out L/R
XLR
-Connector: XLR-3-32 type (balanced)
-Load impedance: 600 Ohms or greater
-Nominal level: – 4dBu
-Maximum level (0dBFS 0dB-SACD):
– 16 dBu (Nominal level= –12dBFS),
– 18 dBu (Nominal level= –14dBFS),
– 20 dBu (Nominal level= –16dBFS),
– 22 dBu (Nominal level= –18dBFS),
– 24 dBu (Nominal level= –20dBFS)
RCA
-Connector: RCA (Unbalanced)
-Load impedance: 47 k Ohms or greater/
-Nominal level (– 12 dBFS – 12 dB-SACD):
– 6 dBV (REC LEVEL=0dB)
-Maximum level (0 dBFS 0 dB-SACD): + 6dBV
Phones
-Connector: 1/4" stereo phone jack
-Load impedance: 16 Ohms or greater
-Maximum level: 170 mW + 170 mW @ 32 ohms
S/P Dif In/Out (coaxial)
-Connector: RCA pin
-Format: IEC60958
Word Clock In/Out
-Connector: BNC receptacle, 75 Ohms
USB
-Connector: Type B
-Format: USB 2.0 compliant,
-USB mass storage class
-Supported operating systems: Windows 2000,or later Mac OS X 10.3.9 or later
Included Items
AC power cable, Install CD (“AudioGate" audio file conversion application)
AudioGate ver,1.5 Operating Requirements
Windows
-Supported operating systems: Microsoft Windows XP Home Edition/Professional Edition Service Pack 1 or later, Microsoft Windows Vista
-Supported computers:
CPU: Intel Pentium III /1 GHz or better
RAM: 256 MB or more
A USB port that meets the operating requirements of Microsoft Windows XP/Vista
Macintosh
-Supported operating system: Mac OS X 10.3.9 or later
-Supported computers:
CPU: Apple G4/800 MHz or better, Intel Mac is supported
RAM: 256 MB or more
A USB port that meets the operating requirements of Mac OS X
Demo Project
All Most Blues
The Wind and the Wheat performed by Phil Keaggy
copyright Phil Keaggy 2006
http://www.philkeaggy.com/
*This product comes installed with the "ISC-MP3 BF532 d Korg" MP3 decoder which was developed by The Institute of Super Compression Technologies, Inc. (ISCT), Japan.
*”DSD” is a registered trademark.
*Logos, product names, and company names are their trademarks or registered trademarks.
Specifications subject to change without notice |
* Instrument trainer / recorder
* 1/4" guitar/bass input
* Guitar/bass effects including amp modelling, delay, reverb, chorus and more
* Records 44.1kHz/16-bit WAV files
* Playback 16 or 24-bit WAV files or MP3 files
* SD/SDHC card media slot with included 2GB card
* Overdub recording allows sound-on-sound build up of an arrangement
* Loop playback using dedicated buttons
* Variable Speed Audition speeds up or slows down playback without changing the pitch
* Chromatic Tuner and Metronome
* USB 2.0 jack for high-speed music transfer
* Dedicated keys and large LCD display for easy operation
* Angled desktop design
* Includes 2GB SD card, AA batteries, USB cable
|
Features at a glance - XLR plug-on connection
- Compatible with dynamic mics as well as bettery-powered condenser mics
- 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- XLR connector also can use as external input for external input
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added, which is convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Locking mechanism assure a tight connection with the microphone body
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery by using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between multiple DR-10X units using the infrared transmission function
- Firmware can be updated using a microSD card
- RoHS-compliant product
|
Reviews
There are no reviews yet.