Content | The highly flexible Zoom LiveTrak L-20 is a 20-input digital mixer and multi-track recorder, well suited for live performances, studio recording, band rehearsals, podcasts, and more. The mixer features 16 mono channels, each with combo mic/line XLR-1/4" inputs with high gain, low-noise microphone preamps, +48V phantom power, and a single compression knob, while the two stereo inputs offer dual 1/4" and RCA inputs. Channels 1-2 also offer Hi-Z inputs for connecting guitars and basses. All channels work with the on-board channel strip, which provides a low-cut filter, a 3-band EQ, a pan control, and two send FX for sending signals to the 20 built-in high-quality effects processor with two dedicated EFX Return channels.
The LiveTrak L-20 features balanced XLR main outputs, while the six monitor outputs utilize balanced TRS 1/4" connectors, each with the ability to set up customized mixes. Simply connect your headphones or a stage monitor and adjust the levels to taste. There are nine snap-shot presets, which allow you instant recall of different setups and sessions.
The built-in SD recorder can simultaneously record every channel and the master fader stereo signal output for a total of 22 tracks at resolutions up to 24-bit/ 96 kHz. Files can easily be copied to a computer and used in a DAW. In addition, overdubbing and punching in/out can be done as expected when using the unit as a multi-track recorder. The L-20 can also function as a 22-in/4-out USB audio interface, allowing you to record directly to your favorite software DAW or to iOS devices. Other notable features include 12-segment LED meters on all channels, a built-in metronome, and a built-in slate mic for identifying takes. The Zoom LiveTrak L-20 ships with a power cord and a USB cable.
- 20 Discrete channels
- 16 Mono plus 2 stereo channels with XLR and 1/4" phone jacks
- Simultaneous recording of 22 tracks
- Playback of 20 tracks
- USB audio interface with 22 inputs and 4 outputs
- Audio recording up to 24-bit / 96 kHz on SD storage media
- 48V Phantom power
- Hi-Z Connectors (channels 1-2)
- 26 dB Pad (channels 3 to 16)
- Compressor per channel with one knob (channels 1 to 16)
- Solo and mute buttons for each channel
- Low cut per channel between 40 - 600 Hz variably adjustable
- Total outputs and six configurable monitor outputs
- Monitor outputs can be configured as headphone output or normal line-level output
- Additional separate headphone output
- Memory function for up to nine mixer scenes
- 20 Internal, editable chorus, delay and reverb effects
- Two effect buses
- Integrated talkback microphone
- Pre-record function
- Class-compliant operation (for iOS compatibility)
- Automatic start and stop recording possible
- Import and export of projects via the USB 2.0 interface
- Compatible functions for the ZOOM FS01 footswitch
- Dimensions (W x D x H): 445 x 388.4 x 82.6 mm
- Weight: 3.71 kg
- Includes power supply (AD-19), USB 2.0 cable and quick start guide
| TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode:MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format:44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
Recording format |
|
WAV |
44.1/48/96kHz, 16/24bit |
BWF |
44.1/48/96kHz, 16/24bit |
Number of channels |
4channel (stereo x2) |
Analog audio input |
|
1/L, 2/R connectors |
|
Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
Set to "MIC / MIC+PHANTOM“ |
|
Input impedance |
2k ohms |
Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
Maximum input level |
0dBu |
Minimum input level |
-72dBu |
MIC input gain |
TRIM MAX |
LOW |
+11dB |
MID |
+36dB |
HIGH |
+52dB |
Set to "LINE“ |
|
Input impedance |
10k ohms or more |
Standard input level |
+4dBu |
Maximum input level |
+24dBu |
3-4 connector |
|
Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
Input impedance |
10k ohms |
Maximum input level |
+10dBV |
Minimum input level |
-50dBV |
MIC input gain |
TRIM MAX |
LOW |
+3dB |
HIGH |
+26dB |
CAMERA IN connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Input impedance |
10k ohms |
Standard input level |
-10dBV |
Maximum input level |
+6dBV |
Analog audio output |
|
CAMERA OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-50dBV |
Maximum output level |
-30dBV |
LINE OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-10dBV |
Maximum output level |
+10dBV |
PHONES connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Maximum output level |
50mW + 50mW |
USB |
|
Connector |
Mini-B type |
Format |
USB2.0 HIGH SPEED mass storage class |
REMOTE |
|
Connector |
2.5mm TRS jack |
Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption |
5.4W |
Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
DR-60D |
|
Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
DR-60D+BP-6AA |
|
Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
Weight |
510g (not including batteries) |
Operating temperature |
0˚C to 40˚C |
Standard accessories |
USB cable, warranty card, Owner's manual |
Computer compatibility |
Windows |
OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
CPU |
Pentium 300MHz or more |
RAM |
128MB or more |
USB |
recommended: USB2.0 |
Macintosh |
OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
USB |
recommended: USB2.0 |
Audio performance |
Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
1GB |
2GB |
4GB |
8GB |
WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| |
- 2-channel field recorder in Stereo or Mono on Compact Flash or Micro drive cards
- Light weight with rigid chassis
- FAT32 file system & BWF Stereo file format + MP3 recording/playback
- Built-in Stereo microphone for quick memo recording
- 2 x XLR mic inputs with phantom power to accept professional microphones
- High resolution recording at 24bit 96kHz
- Mic Trim for accurate recording level adjustment
- Automatic Level Control (ALC - OFF/ALC/LIMITER)
- Hi-Pass Filter
- Backlit 132 x 64 dot matrix LCD display
- Two-hour capacity on 4GB CF card with Stereo 24 Bit/96 kHz resolution
- Pre-record buffer (2 secs) ensures full-take recording with no inadvertent loss
- Auto File Closing (the recording file auto-closes every minute to secure recorded data)
- Auto Shut-off function when the input power becomes abnormally low to save data
- Convenient file naming mode: DATE or TAKE
- 4 hours operation on 4 x AA Alkaline / Ni-MH batteries
- 8 hours operation possible with optional rechargeable NiMH battery pack
- Wired remote controller with microphone attachment belt
- USB 2.0 data transfer to Mac or PC computers for further editing and post-production
- Comes with 128MB CF card, AC adapter, dedicated shoulder belt and carrying pouch
• Recording / Playback / General
Recording Medium: Compact Flash Card
Recording Times: see chart above
File Formats: BWF (Broadcast Wave Format), MP3 (MPEG Layer-3)
Sampling Frequency: 44.1 / 48 / 88.2 / 96 kHz
Quantization: 16-bit linear (44.1 / 48 kHz);
24-bit linear (44.1 / 48 / 88.2 / 96);
MP3 192kbps (stereo)
Recording Tracks: 2 tracks (stereo)
Simultaneous Recording: 2 tracks (stereo)
Rec/Play Frequency: 20Hz-20kHz ±2dB (FS 44.1/48kHz); 20Hz-40 kHz ±3dB (FS 88.2/96kHz)
S/N: (ADC-DAC, 24bit, 48kHz) - Line: (Input Gain: +4dBu) 95dB (typical) - Mic: (Input Gain: -60dBu) 85dB (typical)
Dynamic Range: 95dB (typical) (ADC-DAC, 24bit, 48kHz)
THD: (ADC-DAC, 24it, 48kHz) - Line:
Channel Separation: more than 90dB (at 1kHz 0dB) (24bit, -20BFS, 48kHz)
Reference Level: -12dBFS
Locate Memory: 99 Cue points per file
Battery Operation Time: approx. 4 hours (4 x AA Alkaline / Ni-MH AA cells); approx. 8 hours (optional Ni-MH battery pack) | • Input / Output
Analogue In (L/R) Connector: XLR-Jack (1/4“) Combo Type
Mic In Connector: XLR (balanced, 2-pin hot)
Line In Connector: Jack (1/4“) (unbalanced)
Input Impedance: > 10k ohm
Reference Input Level: -10dBV
Maximum Input Level: +2dBV
Input Impedance: > 6k ohm
Reference Input Level: -50dBu to -10dBu
Maximum Input Level: +2dBu
Phantom: P48
Monitor Out Connector: RCA Phono (unbalanced)
Load Impedance: > 10k ohm
Reference Output Level: -10dBV
Phones Connector: Stereo Mini Jack (3.5mm)
Load Impedance: > 32 ohm
Maximum Output Level: 15 + 15mW (32 ohm)
USB 2.0 (for PC) Connector: Series "B” Receptacle
Built-in Speaker
Maximum Output: 300mW
| • Physical
Dimensions: 57(H) x 206(W) x 132(D) mm
Weight: 0.8kgs (w/o battery)
Included Accessories: CF card (128MB), AC Adaptor, shoulder strap, remote control and carry pouch | Pedigree Portable Field Recorder
The FR-2LE is a compact field memory recorder for professional use offering 24bit 96kHz recording in the industry standard BWF file format. It has a good pedigree given Fostex's previous success with their DAT portables (PD2 & PD4) and latterly with their solid state FR-2 and its optional full timecode facility.
Now with their latest FR-2LE, they have an even more compact offering for high quality field recording, interview recording (MP3 mode also available), or simple film/broadcast audio recording.
The FR-2LE is equipped with two professional phantom powered XLR microphone inputs (XLR-Jack combo) complete with precise control over the recording level. It features a 1 take = 1 file recording system which eliminates overwrites and its 2 second ʽpre-recordʼ buffer means there should never be a missed take or lost soundbite. Thereʼs also an MP3 mode and built-in stereo microphone.
Feature rich, elegant in operation, good pedigree - the new FR-2LE looks assured of success.
MAIN FEATURES
• Long Battery Life
The FR-2LE can run for up to 4 hours on 4 x AA Alkaline batteries and up to 8 hours with the optional NiMH BATPACK battery pack. A choice of two BATPACK chargers are also available - one for the mains and one that also charges your pack from a 12V car outlet.
• Extended recording times
Over 6 hours @ 16bit 44.1kHz recording on an 4Gb CompactFlash card.
• Professional inputs
Dual XLR inputs (XLR-Jack combo) with top quality microphone pre-amps, trim control and phantom power. Analogue out is provided on phono (RCA) connectors.
• BWF or MP3 recording
Record up to 24bit 96kHz audio.
• Tough construction
Manufactured from high-grade materials and specifically designed for professional location recording.
• Fail Safe Recording
In addition to a 1 take = 1 file system to eliminate overwrites, the FR-2LE also features Auto File Closing which closes files at one minute intervals, thus preserving the data in the event of a power failure.
• USB 2.0
The USB 2.0 port allows direct connection to PC and MAC for easy file transfer.
| SPECIFICATIONS
[Recorder]
●Physical Tracks : 24 ●Simultaneous Recording Tracks : 8 ●Simultaneous Playback Tracks : 24 ●Recording Data Format : 44.1/48kHz, 16/24bit WAV ●Maximum Recordable Time : 200 minutes / GB (44.1kHz 16-bit, mono tracks) ●Projects : 1,000 ●Markers : 100 / Project ●Locator : Hours / Min. / Sec. / msec or Bars / Beats / Ticks ●File Editing : Divide, Trim ●Other Functions : Punch-In / Out (Manual, Automatic), Bounce, A-B Repeat, Undo / Redo, Metronome
[Audio interface]
●Input Channels : 8 ●Output Channels : 2 ●Quantization : 24bit ●Sampling Frequency : 44.1, 48, 88.2, 96kHz
[Mixer]
●Faders : 9 ●Level Meters : 4-Segment LED ●Track Parameters : 3-Band Equalizer, Pan (Balance), Effect Send x 2, Invert ●Stereo Links Track pairs : 1/2 to 23/24 selectable
[Effects]
●Algorithms : 9 (CLEAN, DISTORTION, ACO / BASS SIM, BASS, MIC, DUAL MIC, STEREO, 8 x COMP EQ, MASTERING) ●Types : 150 ●Modules : 7 for Insert, 2 for Send / Return ●Patches : 330 for Insert, 60 for Send / Return ●Tuner : Chromatic, Guitar, Bass, Open A/D/E/G, D modal
[Sampler]
●Playback Data Format: 44.1/48kHz, 16/24bit WAV ●Voices: 24 ●Editing Functions: Trim, Time-stretch
[Rhythm]
●Voices: 8 ●Sound Format: 16-bit Linear PCM ●Drum Kits : 10 ●Pads : 8 (velocity-sensitive) ●Precision : 48 PPQN ●Rhythm Patterns : 511/project ●Patterns : 511 (472 factory, 39 blank) / Project ●Beat : 1/4 - 8/4 ●Tempo : 40.0 - 250.0 BPM
[Hardware]
●Recording Media : SD Card (16MB-2GB), SDHC Card (4-32GB) ●A/D Conversion : 96kHz 24bit delta-sigma ADC ●D/A Conversion : 96kHz 24bit delta-sigma DAC ●Display : 128 x 64 pixel LCD (with backlight) ●Inputs : 8 x XLR-1/4''Phone Combo Jack / Input Impedance: (Balanced input) 1kΩ balanced, 2nd hot, (Unbalanced input) 50kΩ unbalanced, (Hi-Z Input) 470kΩ / Input Level: -50dBm to +4dBm continuously variable ●Built-in microphones : Omnidirectional condenser microphones Gain: -50dBm to +4dBm continuously variable ●Phantom Power Supply : 48V / 24V ●Master Output : 1/4“TRS Phone (balanced) / Output Impedance: 1kΩ / Rated Output Level: +4dBm ●Headphones Output : 1/4''Stereo Phone Jack, 20mW x 2 (at 32Ω load) ●USB : [B type (USB2.0 High-Speed compatible)] Audio Interface / Control Surface or Mass Storage Class operation [A type (USB2.0 High-Speed compatible)] USB Host capability ●Power Requirements : AC adaptor (DC5V/1A/center positive) or AA size (LR6) battery x6 ●Battery Life : 4.5 hours (with backlight on and phantom power off) ●Dimensions : 376(W) x 237.1(D) x 52.2(H) mm ●Weight : 1.3kg (without batteries)
*0dBm=0.775Vrms
R24 USB Audio Interface System Requirments
Windows® Windows® XP SP2 or later / Vista SP1 or later / 7
Intel® Pentium® 4 1.8GHz or better
1GB RAM or more
USB 2.0 compatible port
Intel® Mac OS X 10.4.11 or later / 10.5 / 10.6 / 10.7
Intel® Core Duo processor 1.83GHz or better
1GB RAM or more
USB 2.0 compatible port.
* USB hub is not supported.
* Intel® Chipset is recommended. |
The ultimate record-anywhere multitrack.
Capture inspiration whenever and wherever you are.
The new MR-8 Mk II is the easiest to use digital multitrack ever. If you can operate a tape recorder, you'll be recording and multitracking within minutes of opening the box.
By putting all the major controls and functions right there on the top panel instead of buried in a confusing menu system, the MR-8 Mk II, unlike some other recorders, actually aids you in capturing your musical ideas. In addition there's great sounding built-in digital effects, guitar amp and mic simulators, handy mix-down effects, plus the ability to hook up to a PC for data editing, and backing up your songs.
You create. Fostex records.
New for the Mk II is the USB host feature which allows for the easy connection of an 'off-the-shelf' CD-R burner via USB. Making CD masters has never been more simple.
Recording time
Recording time in normal mode (16bit/44.1kHz) is approx. 25 track-minutes on the supplied 128MB CF card and 50 track-minutes on a 256MB card. Extended mode (16bit/22.05kHz) doubles the recording time. Note that recording time varies depending on recorded source, punch in/out, undo/redo status, etc.
Features
8 tracks of recording and playback using CompactFlash cards
2 track simultaneous recording
Superb in-built digital effects inc Mic and Amp simulations
USB Host function for CD burning with 'off-the-shelf' CD burner
2 mic inputs with +48V Phantom Power
Details
8-track recording onto CompactFlash Card.
High quality sound recording and playback with uncompressed linear 16-bit/44.1 kHz digital audio (normal mode) with 2 track simultaneous recording and 8 track playback.
LP Mode (16-bit/22.05 kHz) doubles the recording time.
Physical knobs and buttons for intuitive operations. A new dial knob for menu selection.
Newly added +48V Phantom Power on all two Mic Inputs for wider choice of microphones.
USB Host function ready for CD burning on an off-the-shelf external CD-R drive.
Improved 132 x 64 dot-matrix LCD and self illuminating keys visually show the current status.
Improved built-in digital effects including Reverb, Delay as well as Guitar Amp and Microphone simulations
Black colored top panel design
Analog guitar distortion with the dedicated knob on Input A.
Full-track (8-track) bouncing to a "New Song (track 7/8) for PC transfer and CD burning.
Mastering effects for stereo buss.
USB port for stereo WAV file transfer to and from PC
AC and Battery (6 x AA alkaline cells) operation. Approx. 4 hours maximum operation time with batteries. Includes AC adapter.
Built-in microphone for handy song memo.
Two headphones outputs.
Free "WAV Manager" software available for multiple mono files transfer to and from PCTechnical InfoRecording / Playback
Recording medium CompactFlash
Recording time approx. 6 minutes (8-track on 256MB CF) normal mode
Recording format FAT16
Sampling frequency 44.1 kHz (Normal Mode), 22.05 kHz (LP Mode)
Quantization 16-bit linear (non-compression)
A/D converter 24-bit Delta-Sigma
D/A converter 24-bit Delta-Sigma
No. of recording track 8 tracks maximum
No. of simultaneous rec. 2 tracks
Recording/reproduction frequency 20 Hz - 20 kHz (Normal Mode)
Dynamic range 87dB or more (typical) (Normal Mode)
T.H.D. 0.05% or less (typical) (Normal Mode)
Inputs / Outputs
Analog in (input A/B)
Connector XLR-3-31 type (Pin2:hot) and 6mm TRS phone
Input level -48dBV (MIC) - +4dBV (LINE)
Input impedance 1.5k ohm or more 400k ohm or more (GUITAR on INPUT A)
Phantom power P48V (on/off selectable)
Stereo out (L, R)
Connector 6mm stereo phone
Output level -10dBV (unbalance)
Load impedance 10k ohm or more
Headphones (phone 1, 2)
Connector 2 x 6mm stereo phone
Max. output 30mW or more (at 32 ohm)
Load impedance 16 ohm or more
MIDI out
Connector DIN 5 pin
Format MIDI standard
Foot switch
Connector 6mm phone
Level TTL level
USB 2.0 HI-SPEED
Connector B type
USB 1.1
Connector A type
General
Dimensions 286(W) x 220(D) x 65(H) mm
Weight approx. approx. 1.6kgs
Power requirement DC12V, 400mA |
Reviews
There are no reviews yet.