18 Sound 6ND430 Woofer 6″ 8 ohm 260W Spare part

209.99 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: 6ND43068 Κατηγορία:
The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also […]

 

Διαβάστε περισσότερα

The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required.

The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure.
Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes.
The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization.

92,5 dB SPL 1W / 1m average sensitivity
45 mm (1,77 in) aluminum voice coil
200 W AES power handling
Neodymium motor assembly
Weather protected cone
Improved heat dissipation via unique basket design
Ideal for compact two way and multiway systems

General

Product type Cone driver
Brand Eighteen Sound
Reference 6ND430
Product code ALT060430WF08NA – 022068N430

Informations

Nominal impedance 8 ohm
Dimensional category 6.5 inch, 7.5 inch
Frequency coverage type Midbass, Midrange, High midrange
Manufacturer sensitivity 92.5 dB
Calculated sensitivity 91.94 dB
Nominal power handling 200 W
Max power handling 260 W
Bandwidth 63÷5500 Hz

Fundamental parameters

Sd 133 cm²
Mms 13.3 gr
Cms 519 µm/N
Le 0.28 mH
Re 5.5 ohm
BL 10 T.m

Small signal parameters

Fs 61 Hz
Qes 0.28
Qms 6.5
Qts 0.27
Vas 12.6 L

Datas

Xmax ±5 mm
EBP 218 Hz
Zmin 6.1 ohm
Fs / Qts 226 Hz
Vas * Qts² 0.92 L
Calculated efficiency 0.99 %
Weight ~1.3 kg

Dimensions

Voice coil diameter 1.75 inch
External dimensions 162 | 185 mm
Baffle cutout diameter 148 mm
Depth 73 mm
Front thickness 9 mm
Depth after front 64 mm

Shape & Materials

Front chape Non cylindrical
Magnet type Ferrite

 

Βάρος 5 kg
Ίντσες Μεγαφώνου

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “18 Sound 6ND430 Woofer 6″ 8 ohm 260W Spare part”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

18 Sound 6ND430 Woofer 6" 8 ohm 260W Spare part removeEMINENCE ELA6CBMRA Line Array 6CBMR 6" 150 W 8 Ohm Μεγάφωνο removeB & C Speakers 6-MDN44 Mεγάφωνο Μidrange νεοδημίου 6 removeFaital Pro FPW6N8120RK Recone Kit for FPW6N8120 6" 8 Ohms 120W removeJBL LF CONTROL5, CONTROL SB5 removeCELESTION T5641AWD MID-RANGE 6.5'' NTR06-1705B PRO AUDIO 150W remove
Name18 Sound 6ND430 Woofer 6" 8 ohm 260W Spare part removeEMINENCE ELA6CBMRA Line Array 6CBMR 6" 150 W 8 Ohm Μεγάφωνο removeB & C Speakers 6-MDN44 Mεγάφωνο Μidrange νεοδημίου 6 removeFaital Pro FPW6N8120RK Recone Kit for FPW6N8120 6" 8 Ohms 120W removeJBL LF CONTROL5, CONTROL SB5 removeCELESTION T5641AWD MID-RANGE 6.5'' NTR06-1705B PRO AUDIO 150W remove
Image6nd430 4 ohm 6" woofer spare part
SKU6ND43068ELA6CBMRA6-MDN44FPW6N8120RKJBL-C5003T5641
Rating
Price 209.99 με ΦΠΑ 24% 135.31 με ΦΠΑ 24% 142.00 με ΦΠΑ 24% 58.59 με ΦΠΑ 24% 98.18 με ΦΠΑ 24% 124.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
ContentThe 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure. Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes. The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization. 92,5 dB SPL 1W / 1m average sensitivity 45 mm (1,77 in) aluminum voice coil 200 W AES power handling Neodymium motor assembly Weather protected cone Improved heat dissipation via unique basket design Ideal for compact two way and multiway systems

General

Product type Cone driver
Brand Eighteen Sound
Reference 6ND430
Product code ALT060430WF08NA - 022068N430

Informations

Nominal impedance 8 ohm
Dimensional category 6.5 inch, 7.5 inch
Frequency coverage type Midbass, Midrange, High midrange
Manufacturer sensitivity 92.5 dB
Calculated sensitivity 91.94 dB
Nominal power handling 200 W
Max power handling 260 W
Bandwidth 63÷5500 Hz

Fundamental parameters

Sd 133 cm²
Mms 13.3 gr
Cms 519 µm/N
Le 0.28 mH
Re 5.5 ohm
BL 10 T.m

Small signal parameters

Fs 61 Hz
Qes 0.28
Qms 6.5
Qts 0.27
Vas 12.6 L

Datas

Xmax ±5 mm
EBP 218 Hz
Zmin 6.1 ohm
Fs / Qts 226 Hz
Vas * Qts² 0.92 L
Calculated efficiency 0.99 %
Weight ~1.3 kg

Dimensions

Voice coil diameter 1.75 inch
External dimensions 162 | 185 mm
Baffle cutout diameter 148 mm
Depth 73 mm
Front thickness 9 mm
Depth after front 64 mm

Shape & Materials

Front chape Non cylindrical
Magnet type Ferrite
 

Line Arrays

Recommended for professional audio midrange from 500Hz-3kHz. Basket is closed. Truncated basket for close
spacing in line-arrays.


SPECIFICATION
  • Nominal Basket Diameter 6.5“, 165 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 150 W / Music Program 300 W
  • Resonance 460 Hz
  • Usable Frequency Range 500 Hz - 5.4 kHz
  • Sensitivity 97.8
  • Magnet Weight 38 oz.
  • Gap Height 0.31“, 7.92 mm
  • Voice Coil Diameter 1.5“, 38.1 mm

THIELE & Small Parameters
  • Resonant Frequency (fs) 460 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.33 mH
  • Mechanical Q (Qms) 3.13
  • Electromagnetic Q (Qes) 1.24
  • Total Q (Qts) 0.89
  • Compliance Equivalent Volume (Vas) 0.4 liters / 0.01 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 2.7 cc
  • Mechanical Compliance of Suspension (Cms) 0.01 mm/N
  • BL Product (BL) 11.1 T-M
  • Diaphragm Mass inc. Airload (Mms) 9 grams
  • Efficiency Bandwidth Product (EBP) 371
  • Maximum Linear Excursion (Xmax) 0.2 mm
  • Surface Area of Cone (Sd) 133.1 cm²
  • Maximum Mechanical Limit (Xlim) 0.8 mm

MOUNTING Information
  • Recommended Enclosure Volume
    Sealed N/A
    Vented N/A
  • Overall Diameter 6.59“, 167 mm/Width
  • Baffle Hole Diameter 5.65“, 143.5 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket as standard
  • Mounting Holes Diameter 0.23“, 5.7 mm
  • Mounting Holes B.C.D. 6.06“, 154 mm
  • Depth 2.77“, 70 mm

MATERIAL of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented and extended core
  • Pressed steel basket with truncated sides
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

Mεγάφωνο Μidrange νεοδημίου 6“, 240W,
96,5dB, 1 kg.

44 mm (1.7 in) aluminium voice coil
150 – 6000 Hz response
96.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Aluminium demodulating ring allows a very low distortion figure
300 W continuous program power capacity
Ventilated voice coil gap for reduced power compression

 

Recone kit γιά το FPW6N8120

JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003


  • JBL Control 5, Pro VIII, Factory Speaker Woofer Part # C5003
  • This is a complete brand new JBL, Control 5 woofer
  • Voice coil: 1" (25mm)
  • Diameter: 6.5" (165mm)
  • Impedance: 3.9 ohms
  • Treated paper cone with foam edge
  • Fits JBL Driver and Cabinet Models
  • JBL: Control 5, C-5003, C5003, C 5003, Pro VIII, Pro 8

control5_c5003rear

  • Suitable for line array applications, utilising a space efficient chassis profile
  • FEA optimised flux distribution in the magnet assembly provides low harmonic distortion
  • M-roll surround provides progressive excursion control, generating a smooth frequency response
  • Intelligent heat management in both chassis and magnet assembly design offers reduced thermal distortion
  • Nominal diameter (mm/in) 165/6.5
    Power Rating (AES, W rms) 150
    Nominal impedance (Ω) 8
    Voice coil diameter (mm/in) 44.5/1.75
    Magnet type Neodymium
    Chassis type Cast aluminium
    Sensitivity (dB) 95.5
    Frequency range (Hz) 150-7000
    Coil material Copper clad Aluminium
    Cone material Kevlar loaded paper
    Surround material Cloth-sealed
    Suspension Single
    Xmax (mm/in) 2.5/0.098
    Gap depth (mm/in) 6.0/0.24
    Voice coil winding width (mm/in) 11.0/0.43
    Small Signal Parameters
    D (m/in) 0.13/5.12
    Fs (Hz) 109.6
    Mmd (g/oz) 12.069/0.422
    Mair 0.857/0.03
    Qms 2.632
    Qes 0.527
    Qts 0.439
    Re (Ω) 5.95
    Vas (lt/ft3) 4.062/0.143
    BI (Tm) 10.03
    Cms (mm/N) 0.163
    Rms (kg/s) 3.385
    Le (mH)
    Mounting Information
    Overall diameter (mm/in) 189/7.44
    Overall depth (mm/in) 71/2.79
    Cut-out diameter (mm/in) 145/5.7
    Mounting slot dimensions (mm/in) 5.5/0.22 x 7.5/0.3
    Number of mounting slots 4
    Mounting slot PCD range (mm/in) 172/6.77
    Unit weight (kg/lb) 0.85/1.87
    Packed Dimensions and Weight
    Single pack size W x D x H (mm/in) -
    Single pack weight (kg/lb) -
    Multipack () size W x D x H (mm/in) -
    Multipack () weight (kg/lb) -

    Unit conditioned prior to measurement.


    Weight5 kg3.00 kg1.00 kg1.00 kg1.00 kg0.85 kgDimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔAdditional information
    Βάρος 5 kg
    Ίντσες Μεγαφώνου

    Βάρος 3.00 kg
    Βάρος 1.00 kg
    Βάρος 1.00 kg
    Βάρος 1.00 kg
    Βάρος 0.85 kg

    Πρόσφατη Εμφάνιση Προϊόντων