Content | 946 S 50 High Quality Aftermarket Stylus for Philips, Cartridge and more
Specs:
Diamond
Tracking Force: 2.0 – 3.0 grams
16 or 33 or 45rpm
package Dimensions: 5.4 x 3.5 x 1.4 cm 20Grams
Stylus Color: Black
Fits the following models:
This stylus was used in the following turntables: Philips 503, 504, CB 200, GA 247, GA 308, GA 312, GA 437, GA 623, GC 003/CB 200, GC 003/DC 30, GC 047/DC 30, GF 403, GF 407, GF 446, GF 447, GF 504
The stylus is used in the following turntable cartridges: GP200, GP204, GP205 and GP300
Πρόκειται για ανταλλακτικές γραφίδες υψηλής ποιότητας που δεν είναι σε καμία περίπτωση κατώτερες από την αρχική.
Σημείωση: Προσδιορίστε τη γραφίδα σας από τις εικόνες. Οι ονομασίες διαφέρουν σημαντικά ανάλογα με τον κατασκευαστή και αναφέρονται μόνο στους πιο συχνά χρησιμοποιούμενους τύπους. Το χρώμα δεν είναι καθοριστικό, είναι σημαντικό το σχέδιο να ταιριάζει.
| Stylus 3E
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value
| Technical data
Output |
3,5 mV |
|
Frequency response |
10-25.000 Hz dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
30 µm/mN |
Stylus type |
Spherical |
Stylus tip radius |
R 15 µm |
Tracking force range |
1,25-1,75 g (12,5-1,75 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
Recommended for following cartridges |
Dual TKS 49S |
Recommended for following cartridges - Dual TKS 49 S
*) Typical value | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Stylus 40
Technical data |
| Frequency range | 20-30.000 Hz | Frequency response | 20-30.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | Compliance, dynamic, lateral | 25 µm/mN | Stylus type | Nude FG 70 | Stylus tip radius | r/R 5/70 µm | Equivalent stylus tip mass | 0,3 mg | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value | Stylus 2M Red
Technical data |
|
Frequency range |
20-22.000 Hz |
Frequency response |
20-20.000 Hz + 3 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Red |
|
|
Recommended for following cartridges |
2M Red |
*) Typical value |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.