| Content |
- Zip speaker cable
- High strand count
- Rugged PVC jacket with polarity stripe
- Temperature range -20°C to +70°C
This flexible zip type loudspeaker cable uses two parallel conductors of stranded oxygen-free bare copper and a rugged PVC jacket with red polarity indication stripe. It is ideal for fixed installations and available with 2 x 0.75 mm², 2 x 1.5 mm², 2 x 2.5 mm² or 2 x 4 mm² cross sectional areas.
Product type
Bulk Cable
Type
Speaker Cables
Colour
Black
Exterior diameter
3.5 x 7 mm +/- 0.2 mm
AWG (American Wire Gauge)
16
Cross section
1.5 mm²
Composition of conductor
bare copper, OFC, 48 x 0.20 mm
Number of internal conductors
2
Jacket material
PVC
Operating Temperature
-20 - 70 °C
Weight
0,1 kg | LS Cable Tribun 2 x 1,5 mm² - White
Τιμή μέτρου
Product Number: KLS215TCW
The world is round...
...and our speaker cable TRIBUN is so flat that you can barely see it once it has been installed. It can be installed under carpets, behind decorative moldings, on the ceiling, and underneath furniture. The TRIBUN is almost invisible. It is available in white, meaning that not even a mouse will recognise it!
This makes it ideally suitable for building installation (for example, in hotels, bars, sporting arenas) and in churches. The edges are slanted ensuring that your shoe will not get caught in it. The bottom is flat and finished to allow for application of double-sided adhesive tape.
The SC-TRIBUN can be easily split and is only 2 mm high!
The advantages: - Good transmission quality due to the use of oxygen-free copper stranding
- Installation extremely flat and almost inconspicuous
- Incredibly flexible and easy to work with
- Designed like an ornamental molding, thus barely noticable
- Very reasonably priced
The application: - Fixed installation in building technology
- Fast and inconspicous connection of HiFi-systems
- Church acoustics
| Element 2.0 is an ideal ‘first upgrade’ speaker cable.
Element is well suited as an upgrade for ‘starter’ systems or for the speakers in a 5.1 set-up.
The Atlas Element 2.0 contains 2mm² of concentric stranded OFC (Oxygen Free Copper) contained in a high density polyethylene dielectric (insulation layer), unusual at this price point where PVC is much more common. Low quality dielectrics such as PVC typically degrade the music signal by imposing a characteristic blurring on the sound.
Element 2.0 is supplied in a pearl white finish, and can be terminated with Z-plugs or OFC spades.
| Construction |
Multi-core |
| Material |
6n OFC |
| Dielectric |
High Density PE (Polyethylene) |
| Screen |
none |
| Capacitance |
78.26 pF/m |
| Inductance |
0.51mH/m |
| Resistance |
0.0104Ohms/m |
| Outside Diameter |
3.5 X 7.0mm (rectangular section) |
| VOP |
0.695 |
| SPK-425 MKII
Stage speakercable 4 x 2,5 mm Twist protection
Conductor Resistance
10 Ω/km
Maximum Wire Size
2.5 mm²
Maximum Wire Size AWG
13 AWG
Outer Cable Diameter
13 mm
Maximum Ambient Temperature
60 °C
Minimum Ambient Temperature
-10 °C
| Adam Hall Cables K4 LS 225 HF
Speaker Cable 2 x 2.5 mm² highly flexible black
- Speaker cable 2 x 2.5 mm²
- Super flexible Speaker cable due to very fine oxygen free cooper wires and soft PVC jacket
- Use of ultra-grade quality copper
- Sophisticated core stranding technique and PVC outer jacket for maximum flexibilty
This cable is especially designed for connecting loudspeakers, and meets all the special technical requirements. Low-oxygen copper strands ensure better transmission quality and a long lifespan. Very flexible, well-suited for use with cable drums!
Product type
Bulk Cable
Type
Speaker Cables
Color
Black
Overall diameter
9.5 ± 0.2 mm
Center conductor cross section
2.5 mm²
Center conductor material
Copper bare, OFC
Center conductor construction
318 x 0.1 mm
Number of internal conductors
2
Line resistance
7.8 Ohm(s)
Capacitance
150 pF/m
Jacket material
PVC
Weight
0,05 kg | Μulticore Kαλώδιο Ηχείου 4 x 4mm |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.