Content |
C 547 BL
Πυκνωτικό μικρόφωνο boundary, υπερκαρδιοειδές, απόκριση 30-18000Ηz, ευαισθησία
8,5MV/PA, phantom power 9-52V, bass cut filter, καλώδιο 3m με XLR. Άθραυστο
περίβλημα. Βάφεται σε οποιοδήποτε χρώμα όταν οι συνθήκες το απαιτούν. Περιλαμβάνεται
αντιανεμικό. Κατάλληλο για ομιλία, συσκέψεις, θέατρα, ναούς, kick drums, instruments.
|
MX393C - Condenser Boundary Microphone, Built-in Preamp, 12-ft Tini "QG" ? to XLR Cable, Programmable Switch and LED Indicator
|
Μικρόφωνο επιφανείας για τραπέζια συνεδριάσεων, μαύρο, Led
λειτουργίας - 3 κάψες καρδιοειδείς x 120=λήψη 300-360 μοίρες , διακόπτης Mute προγραμματιζόμενος, στρογγυλό διάμετρος 8 cm), με ενσωματωμένο προ-ενισχυτή απόληξη σε 3 pin XLR, Tοποθετείται βυθιζόμενο σε έπιπλο.
|
The new Engineered Sound.
This low-profile omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a 360º pickup angle, and is available in two colors: black (ES945) and white (ES945W).
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
- Low-profile element provides uniform omnidirectional polar pattern with 360º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Self-contained power module with XLRM-type output connector
- Rugged all-metal case with a two-layer steel mesh grille
- Isolators provide mechanical dampening of mounting-surface vibration
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Available in two colors: black (ES945) and white (ES945W)
- RoHS compliant-free from all substances specified in the EU directive on hazardous substances
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Omnidirectional
- Frequency Response: 40-18,000 Hz
- Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 142 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 112 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 64 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 11-52V DC, 2 mA typical
- Weight: 63 g (2.2 oz)
- Dimensions: 69.0 mm (2.72“) long, 28.0 mm (1.10“) diameter
- Output Connector: Integral 3-pin XLRM-type
|
PRO42 πυκνωτικό μικρόφωνο boundary από την Audio Technica κατάλληλο για ηχογραφήσεις, broadcasting. Είναι ιδιαίτερα διακριτικό, προορίζεται για επιτραπέζια χρήση, διαθέτει ενιαίο πολικό διάγραμμα, ανθεκτική κατασκευή με σταθερό καλώδιο μήκους 7.6m σε βύσμα XLR, 70-14000Hz, phantom power.
The PRO42\'s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules. Very low-profile design for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Uniform polar pattern for maximum rejection of unwanted sounds Rugged design and construction 25\' (7.6 m) cable permanently attached between microphone and XLRM-type connector Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response: 70-14,000 Hz Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 105 dB, 1 kHz at Max SPL Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom Power Requiremens: 9-52V DC, 2 mA typical Weight: 1.2 oz (35 g) Dimensions: 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height Output Connector: 3-pin XLRM-type on cable Cable: 25\' (7.6 m) long, permanently attached |
PRO44 πυκνωτικό μικρόφωνο boundary από την Audio Technica. Είναι χαμηλού προφίλ για διακριτική παρουσία στο χώρο, είναι εφοδιασμένο με διάφραγμα half-space μονής κατεύθυνσης, κατάλληλο για επιτραπέζια χρήση σε συνέδρια, περιλαμβάνει καλώδιο μήκους 7.6m από βύσμα TA3F σε βύσμα XLRM.
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic\'s self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance. Low profile for minimum visibility Wide-range condenser element with low-mass diaphragm for superior performance Self-contained electronics eliminate need for external power modules Rugged design and construction 25\' (7.6 m) detachable cable (TA3F to XLRM-type) Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response: 70-16,000 Hz Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 114 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 86 dB, 1 kHz at Max SPL Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa Phantom Power Requiremens: 9-52V, 2 mA typical Weight: 2.4 oz (67 g) Dimensions: 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height Output Connector: TB3M-type Cable: 25\' (7.6 m) long, with TA3F and XLRM-type connectors |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.