AKG CK91 – ΚΑΡΔΙΟΕΙΔΗΣ ΠΥΚΝΩΤΙΚΗ ΚΑΨΑ

Polar pattern

cardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Πυκνωτικό στερεοφωνικό μικρόφωνο, διπλής κάψας για εφαρμογή στερεοφωνική 90ο ΧΥ εγγραφή. Απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –38 db re 1Mv Pa δυναμική περιοχή >128 db και max SPL 140 db. Περιλαμβάνει αντιανέμιο WS4, μανταλάκι στήριξης RM3, ειδικό καλώδιο από δύο XLR σε stereo mini jack, και πλαστική βαλίτσα μεταφοράς 

Πυκνωτικό μικρόφωνο με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –39 db re 1Mv Pa, κύκλωμα εξαιρετικά χαμηλού θορύβου και υπερκαρδιοειδές πολικό διάγραμμα. Περιλαμβάνει δερμάτινη μαλακή θήκη μεταφοράς ZP1, μανταλάκι στήριξής RM3 και αντιανέμιο WS3.

Κάψα elecret σούπερ - καρδιοειδής, 40Hz-20kHz

Τύπος κάψας : σούπερ - καρδιοειδής 
Ευαισθησία σε ελεύθερο πεδίο, χωρίς φορτίο (1kHz) : 10 mV/Pa +- 2,5 dB
Αντίσταση : 200 Ohm (K6)
Τερματισμένη αντίσταση : 1000 Ohm (K6)
Σχετικό επίπεδο θορύβου : 20 dB
Διαστάσεις : d 44 x 131 mm
Βάρος :

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

• Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
• Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
• Mono compatibility ideal for broadcast applications
• 40 to 20,000 Hz frequency response
• Low noise and distortion
• Wide dynamic range
• Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
• Operates on phantom power or a 6V camera battery
• LED power indicator
• Internal shock mount for reduced stand vibration and handling noise
• Built-in "pop" screen
• Includes windscreen, swivel adapter, and Y-cable