Content |
12'' 2-Way Active Speaker Cabinet, Digital Power Amp. Moule 1100W
- For Portable and Installed Setups
- LF Driver: 12“
- HF Driver: 1" Neodymium with Waveguide
- Class-D Power: 550W / 1100W (Cont/Peak)
- Frequency Response: 53 Hz to 20 kHz
- Maximum SPL: 127 dB
- Coverage: 90° x 60°
- 2 x Combo XLR-1/4" Inputs + 1 XLR Output
- Volume Control, Clip Limiter with LED
- Includes Power Cord
The black TS212 TRUESONIC 1100W 12" 2-Way Powered Loudspeaker from Alto Professional provides transparent sound for both musicians and live sound engineers. This TS212 enlists its pure signal path, efficient driver design, and durable, lightweight polypropylene enclosure to deliver precise reproduction of deep lows, crystal-clear high end and smooth mid-range.
The speaker is designed for versatility and longevity. Its trapezoidal design decreases the resonance of the standing wave in the cabinet, producing a truer and more accurate sound reproduction. The TS212 features a 12" woofer and a 1" high-frequency driver with a precision waveguide that combine to offer a frequency response of 53 Hz to 20 kHz with a peak SPL of 127 dB. Both drivers are designed to be efficient, translating into more power from the amplifier, actually working to generate sound rather than heat. This durable, lightweight enclosure is stand-mountable for weekend gigs and flyable for more permanent installations. The TS212 ships with a standard IEC power cord.
- 550W continuous, 1100W peak Class-D power
- 12" LF driver, 2.5" high-temperature voice coil
- 1" neodymium driver with precision waveguide
- Bi-amplified design with precision active crossover and EQ
- Integrated 2-channel mixer with dual XLR-1/4" combo mic/line inputs and independent level controls
- XLR mix output
- Ground-lift switch
- Contour switch for increased EQ control
- Electronic clip, thermal and transducer overdrive protection
- Compact, lightweight, trapezoidal cabinet design for easy transport and installation
- Angled rear panel for wedge monitor applications
- Stand- and pole-mountable with integral M10 suspension points
Output Power | 1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF) | Drivers | Low Frequency: 12" (31 cm) woofer, 2.5" (6.4 cm) voice coil
High Frequency: 1.0" (2.5 cm) neodymium driver with precision waveguide | Crossover | 2 kHz | Maximum SPL | 127 dB peak, 124 dB continuous (dB SPL @ 1 m) | Frequency Response | 53 Hz to 20 kHz (+/-3 dB) | Frequency Range | 46 Hz to 22 kHz (-10 dB) | Coverage | 90° H x 60° V nominal | Connectors | 2 x XLR-1/4" combo jack mic/line inputs, 1 x XLR Mix output | Cabinet | Trapezoidal, injection-molded, polypropylene enclosure with perforated steel grille | Controls | Volume, power on/off with LED, clip limiter with LED, ground lift | Protection | Electronic clip, thermal and transducer overdrive protection | Power | Input: 100 to 120/220 to 240 VAC, 50/60 Hz | Dimensions (W x D x H) | 23 x 14 x 14" (59 x 36 x 35 cm) | Weight | 28.4 lb (12.9 kg) |
|
Features
- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.
Technical Data
Nominal LF Amplifier Power | 500 W | Nominal HF Amplifier Power | 100 W | Frequency Range (-10 dB) | 60 Hz-20 kHz (EQ Main) | Rated Peak SPL at 1 m | 133 dB | Dispersion | 80ºH x 50ºV rotatable horn | Enclosure Material | Plywood | Color/Finish | Black/Paint | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.7 A | Dimensions (H x W x D) | 71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in | Weight | 22 kg (48 lb) |
|
Αυτοενισχυόμενο ηχείο δύο δρόμων σε πλαστική καμπίνα με woofer 12" και κόρνα τιτανίου 1,5“, ενισχυτής 1200W RMS class D με limiter (διασπορά 90 Χ 60), απόκριση συχνότητας 51-20000Hz, 130dB max SPL. Παρέχονται 2 είσοδοι με Line Balanced XLR combo/ jack και RCA stereo. Link out με Balanced XLR. Διαθέτει επεξεργαστή DSP (LCD Screen) με επιλεγόμενη ρύθμιση τοποθέτησης (monitor, tripod, wall, suspend). Επιλογή λειτουργίας 4 θέσεων (Music, Live, Speech, Club), ρύθμιση high pass (80Hz, 100Hz, 120Hz, 150Hz, ELX200-12SP, ELX200-18SP, ZXA1-SUB, EKX15SP, EKX18SP, ELX118P) και eq 3 περιοχών . Δυνατότητα αποθήκευσης 5 user ρυθμίσεων από τον χρήστη. Μπορεί να ελεγχθεί ασύρματα μέσω bluetooth με την εφαρμογή EV QuickSmart Mobile application. Bάρος 15,6kg σε μαύρο χρώμα. Διαθέτει φωλιά για βάση στήριξης και 3 σημεία στήριξης Μ10.
Κατασκευαστής | ELECTRO VOICE | Application | Concert, Installation, Portable PA | Τύπος Ηχείου | Ενεργό | Κατηγορία Ηχείου | Δορυφόροι (full range) | DSP | Ναι | Υλικό Κατασκευής | Πλαστική Καμπίνα | Χρώμα | Μαύρο | Βάρος (kg) | 17,7 | Συνολική Ισχύς (Watt) | 1200 | Διάμετρος Woofer (inches) | 12 | Tweeter / Driver (inches) | 1,5 | dB (max spl) | 130 | Απόκριση συχνοτήτας (Hz) | 51-20000 | Σειρά | ELX200 series | Μοντέλο | ELX200-12P | Part Number | F01U326044 | Εγγύηση | 3 Χρόνια Εγγύηση |
|
Features
400 Watt digital bi-amplification
128 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 3" voice coil
2" Titanium dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 45 Hz ÷ 20 kHz
Max SPL: 128 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 2" 2.5" voice coil
Woofer: 12" 3" voice coil
Input/Output Section
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1300 Hz
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 20.2/44.53 kg/lbs
| - 2-way active 12” bass reflex PA speaker
- High-efficiency 500 watts RMS digital power stage and 132 dB max. SPL
- Multi-purpose design for fullrange, satellite and monitor applications
- Application presets for quick frequency response contouring
- BEM optimized HF waveguide for uniform coverage
- 12” custom woofer and BMS compression driver
- DynX® DSP technology for distortion-free performance
- 2 line/mic input channels with individual gain controls plus mono mix out
- 15 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 12 A G3 is powered by high efficiency Class D amplification with a mighty 500 watts RMS output. It drives a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Woofer voice coil (mm)
63.5 mm
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
58 - 20000 Hz
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
- 40 °C
Relative Humidity:
<80% (non-condensing)
Cabinet material
15 mm Plywood
Cabinet construction
vented
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 12" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 17.2/37.91 kg/lbs
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.