Content |
- Speaker Diaphragm C41035
-
Replacement for several Speaker brands
-
Voice coil: 1.35" (34.4mm)
-
Ring Diameter: 62.7 mm
- Total diameter : 62.8mm
- The center distance of the two terminals post: 2.89" ( 73.0mm )
-
Length: 82.5 mm
-
Impedance: 8 ohm, DCR: 6.2 ohm
-
Mylar dome
-
Fits Driver and Cabinet Models:Varius
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number | C41035 | VC Diameter | 34.4 mm | VC Bobbin Material | KSV | VC Wire | CCAR/ALR/SV | Diaphragm Material | MYLAR | Tracery on Diaphragm Edge | | Diaphragm Out Diameter | 63 mm | Diaphragm Height | mm | Diaphragm Thickness | 0.04 mm | RDC | 6.2Ω | Fit Wash Size | | Replacement | |
|
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
|
Ανταλλακτικό διάφραγμα για RX-22 driver, που φοράνε τα ηχεία Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
-
Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
-
NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
-
Voice coil: 2" (50mm)
-
Diameter: 4-1/2" (115mm)
-
Impedance: 8 ohm
-
Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
-
Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs.
|
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
|
Voice coil for DD-1
Dimensions: 80 x 37 mm
Mounting Depth: 25 mm
Weight: 0,1 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.