ARTSOUND VD-231 ΜΕΤΑΤΡΟΠΕΑΣ ΑΠΟ HDMI MALE ΣΕ VGA FEMALE

ARTSOUND VD-231 HDMI MALE TO VGA FEMALE CONVERTER ADAPTER CABLE

This Adapter Cable supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors. The gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan.
HDMI Male to VGA Female Video Converter Adapter Cable for PC Laptop HDTV Projectors and other HDMI Input Devices:

• Supports resolutions up to 1920 x 1080 (1080p Full HD) including 720p and 1600 x 1200 for HDTV monitors or projectors
• Gold-plated HDMI connectors provide wear and corrosion resistance to ensure a long lifespan
• With this version, we added a standby function to lower the energy consumption
• On the past design of HDMI to VGA converters, if HDMI port was connected to the device, VGA port will keep working, now, we added an environmental friendly standby function to make sure when there are no signal outputs from VGA, convertor will be at a low energy consumption, in the meanwhile to produce less heats
• Lower energy consumption, heat-reduced, extends the life of the product; after receiving customer’s feedback that the product will get overheated, we improved the operating current of the product to lower from 220mA to 120mA
• More stable performance and not easy to skip the screen, we improved the design of chips, mainboard and circuit to make it more stable when transmitting signal

The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas

The ARTSOUND new * Analog to Digital Audio Adapter/Converter * converts analog Left/Right RCA-style audio connections to digital S/PDIF coax or TOSLink outputs.The unit is compact, easy to install, and operates in a wide variety of operating conditions.

How it works:

Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device ...

So you’ve got your entire audio system running Digital (Coax or Toslink) audio, but you’ve got one old piece of equipment with analog output that is gumming up the works? No problem! Just get the Analog to Digital Audio Converter and bring your old equipment into the digital age!

This compact little converter has a set of right/left RCA analog audio input jacks. It will simultaneously convert the analog audio into Coax and Optical (Toslink) Digital signals. You can connect either or both outputs to an appropriate digital audio input on a TV, AV receiver, or anything else.

The converter has a digital sampling rate of 48 kHz and produces an LPCM stereo audio output signal. It is powered by a 5V DC power adapter, which is included. All the connectors are gold-plated.

Note that this converter only works one way – Analog to Digital. It will NOT convert digital signals to analog!

DAC μετατροπέας, ιδανικός για χρήση σε H/Y. Παρέχει 32 bit D/A μετατροπέα με ενσωματωμένο ενισχυτή ακουστικών. Παρέχει σύνδεση USB από την οποία τροφοδοτείτε και η συσκευή χωρίς την ανάγκη προσθήκης εξωτερικού τροφοδοτικού. Λειτουργεί στα 24bit/96kHz. Διαθέτει αναλογική RCA stereo έξοδο καθώς και ψηφιακή S/PDIF optical είσοδο / έξοδο. Στην πρόσοψη διαθέτει ρυθμιστικό έντασης, επιλογέα εισόδου & εξόδου καθώς και την έξοδο των ακουστικών.

Input
USB port sampling frequency 16bit-24bit/96kHz
Interface: USB full speed
Digital Connector: optical, square
Format: S/PDIF (32kHz - 96kHz)

Output
Phones Connector: Stereo phone
Max Output: 100mW (32-ohm loaded)
THD: less than 0.01% at 1kHz, 32-ohm loaded, 100mW
Frequency response: 20Hz / 20kHz +-0.3dB (32ohm loaded, 100mW)
Analog Connector: RCA Pin
Reference output level -10dBV
THD: less than 0.01% at 1kHz
Frequency response: 20Hz / 20kHz +-0.3dB
Digital Connector: Optical, square
Format S/PDIF (32kHz - 96kHz)

General
Power: DC5V (via USB port)
Power Consumption: 2.5W
Accessories: 1 x USB cable (1.0m), 4 x rubber foot, manual
Dimensions: 108mm(W) x 36mm(H) x 140mm(D)
Weight: approx. 450g

• Μετατροπέας Super-high resolution USB to optical/DSD
• Δυνατότητα επιλογής 8 sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
• Μικρό μέγεθος
• Υποστηρίζει μέχρι 32bit/384kHz
• Direct Stream Digital rates: DSD64, DSD128
• 1 αναλογική έξοδο, 1/8” (3.5 mm) για ακουστικά
• 1 αναλογική έξοδο, 1/4” (6.35 mm) για ακουστικά
• 1 αναλογική / ψηφιακή έξοδο, 1/8” (3.5mm)
• Signal-to-noise ratio: 112dB
• Πολύ χαμηλή παραμόρφωση: THD+N 0.003%
• Δυνατότητα ρύθμισης στάθμης εξόδου
• Τροφοδοσία: Μέσω της θύρας USB, ή τροφοδοτικό (δεν περιλαμβάνεται)
• Λειτοργεί σε: Windows 7 - 10, Intel Mac OS X 10.7.5 - 10.11
• Βάρος: 18 g
• Διαστάσεις (WxDxH): 67 x 94 x 30 mm
• Περιλαμβάνει: καλώδιο USB, καλώδιο 1/8”-to-stereo-RCA, καλώδιο ψηφιακό 1/8”-to-TOSLINK®

This analog digital audio converter is designed for home and professional audio conversion. Converts Toslink coaxial or optical digital audio signals into analog L / R audio signals for connection to an external device such as an amplifier via standard RCA connectors. The main features that allow us to be used even in professional contexts are:

• Supports sampling rate at 32.44.1.48 and 96 KHz.
• 24-bit S / PDIF incoming bit stream on the left and right channels.
• Converts coaxial or Toslink digital audio signals into analog L / R audio.
• Provides transmission of signals free of electromagnetic disturbances.
• Easy to install and easy to use.

• Main unit (analog digital audio converter)
• 5V / DC power supply.
• User Manual