Content | Replacement stylus for Audio-Technica AT3600L cartridge and more.
Quality aftermarket replacement turntable needle
Specs:
Spherical Diamond Tip needle 0.6 mil
Tracking Force: 1.5 - 2.5 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Red or Yellow
The stylus is used in the following turntable cartridges: AT90, AT91, AT94E, AT2005, AT3600, AT3650, AT3650C, AT3650L, AT3651, DMS235, DMS239, CG7700, CG7800, CG7900
Suitable for
AIWA : 572 , 888 , G888 , GPE888 , PXE333 , PXE55 , PXE550 , PXE770 , S72 , V550 (CD) , V770 Mk2 , V770 XDX , X33 , X55 , X55DX , X78 , X78DX ,AN11 , CX550 , CXZ720 , LX10 , PXE75 , PXE77 , PXE80 , PXE800 MK2 , PXE850 , PXE860K , PXE88 , PXED9 , V550(CD) , V770MXDX , X75 , Z58CD , Z87CD , ZD200CD , ZD92CD , ZD95CD , ZR220 , ZR700
AKAI : APB1 , PRO110 , PROR1L , PXE900H, APD50 , APM600 , APM670 , M570CD , RS82 , AP M 600, Condor 2000, Omnitronic DD 2250,
AUDIO TECHNICA : 2002 , 2003 , 2004 , 2005 , 2006 , 3000 , AT91 , ATN2001 , ATN3600 , ATN3601 , ATN90 , ATN91
DECCA : DMD1702 DUAL : CS514
HITACHI : HTMD26 , HTMD28 , HTMD38 , MD16 , MD28 , SMD50, HT 6, HT 6 M, HT R 10
JVC : ALE 1 , ALE33 , DC33L , GX120 , GX222 , GX240 , LA120 , LF210 , QLA200 , QLFX5
MEMOREX : 1200 , 1800 , 302 , LAB 1200 , LAB 302
MITSUBISHI : E804CD , ECD60R , LT703 , LT804
PANASONIC : SGV06
PHILIPS : F880, F883
PIONEER : PL223 , PL333 , PL990 , PLZ81 , PLZ91
RELOOP : RP 2000
SANYO : 400 , C20 , DCX17 , DCXW18 , DCXW8 , G1400 , G3230 , G5230 , GXT260 , STW8J , TP1400 , TP250 , TP350 , W17 (CD) , W18 , W27 (CD) , W8
SHARP : 1550CXCD , 1560E , 1600E , 1900E , 2525E , 307H , N15E
SONY : LBT 105, ND 5 G, XO D 101, PSLX220B , PSLX231B , PSLX235 , PSLX320B , PSLX340 , PSLX35P , PSLX45P , PSLX50 , PSLX50P , PSLX70 , PSLX700P , S , S40 , Z2000 , Z3000 , Z5000
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Stylus 2M Blue
Technical data |
| Frequency range | 20-25.000 Hz | Frequency response | 20-20.000 Hz + 2 / - 1 dB | Tracking ability at 315Hz at recommended tracking force *) | 80 µm | Compliance, dynamic, lateral | 20 µm/mN | Stylus type | Nude Elliptical | Stylus tip radius | r/R 8/18 µm | Equivalent stylus tip mass | 0,5 mg | Tracking force range | 1,6-2,0 g (16-20 mN) | Tracking force, recommended | 1,8 g (18 mN) | Tracking angle | 20° | Stylus colour | Blue |
| | Recommended for following cartridges | 2M Blue
| *) Typical value | Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Spherical Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Technical data |
|
Frequency range |
20-29.000 Hz |
Frequency response |
20-20.000 Hz + 2 / -0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15,0 mN) |
Tracking angle |
20° |
Stylus colour |
Bronze |
|
|
Recommended for following cartridges |
2M Bronze |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.