AUDIX f90 Miniature clip-on condenser microphone for drums and percussion

The f90 is a cost effective, miniature clip-on condenser microphone for drum and percussion applications. The f90 is intended for rehearsal bands, small clubs, schools and Houses of Worship. 

The f90 has a uniformly controlled cardioid polar pattern and provides a rich, full sound at distances of 3”-4” off the drum head. The f90 is lightweight, compact and simple to use. The flexible gooseneck, paired with the 90-degree angle of the microphone head, allows the f90 to be positioned directly over the sound source.

The f90 operates on phantom voltage of 9-52 V and is supplied with a phantom power adapter, 6ʼ integrated mic cable and foam windscreen.

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

ΜΙΚΡΟΦΩΝΟ ΓΙΑ ΠΝΕΥΣΤΑ ( ΣΑΞΟΦΩΝΟ, ΤΡΟΜΠΕΤΑ, ΚΛΑΡΙΝΟ Κ.Λ.Π ) - ΚΡΟΥΣΤΩΝ

Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.

• Converter Principle: Electret Condenser Microphone
• Pick-up Pattern: Cardioid pattern
• Frequency Response: 50 Hz – 18 kHz
• SPL: 133 dB
• Sensitivty: -45 dB +/- 3dB
• Impedance: 250 Ohms +/- 30% @1kHz
• Connections: Mini XLR – 3 pins
• Gooseneck: 70 mm
• Cable length: 1,5 m
• Surface: Black matt
• Weight: 56 g
• Accessories: Wind protection, Phantom power adapter

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

• A highly consistent cardioid polar pattern
• Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
• Premium electronic components, including gold-plated internal and external connectors
• Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
• Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

• Extended frequency response
• Low self noise
• Exceptional reproduction of low-frequency sounds
• Can withstand high sound pressure levels (SPL)
• High output level
• No crossover distortion
• Uniform polar response
• Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

• Acoustic instruments -- such as piano, guitar, drums, percussion, strings
• Wind instruments -- brass and woodwind
• Low frequency instruments -- such as double bass, electric bass, kick drum
• Overhead miking -- drums or percussion
• Ensembles -- choral or orchestral
• Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

• Mew A98D flexible drum mount
• SPL handling to 160dB
• frequency response of 20 to 20,000Hz and included preamplifier
• shock mount and windscreen

The e 904 is a cardioid dynamic instrument microphone especially designed for drums.

Features
Full, impressive, lively sound for drums and percussion
Very fast attack
Compact body ideal for mounting on toms and snare drum
Excellent sound profiling, adapts to all percussive styles
Hum compensating coil
Delivery Includes
e 904 microphone
MZH 604 drum clamp
Pouch
User manual

Technical Data
Pick-up pattern  cardioid 
Frequency response  40...18000 Hz 
Sensitivity in free field, no load (1kHz)  2 mV/Pa 
Nominal impedance  350 Ohm 
Min. terminating impedance  1000 Ohm 
Dimensions  63 x 41 mm 
Weight  125 g