Content |
Omni-directional test and measurement microphone for RTA and software systems.
The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability.
Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.
The TM1 is designed, machined, assembled and tested by Audix in the USA.
Model Variation: TM1 PLUS - includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter *
*Bruel & Kjaer® 4231 sound level calibrator or equivalent
Transducer | Pre-polarized Condenser | Polar Pattern | Omnidirectional | Frequency Response | 20Hz to 25kHz (+/- 2dB) | Dynamic Range (Typical) | 112dB | Signal-to-Noise Ratio | 66dB | EIN | 28dB A-weighted | Maximum Input Sound Level | 130dB with distortion | Power Requirements | 18 - 52V Phantom | Output Impedance | 200 ohms | Output Connectors | 3-pin XLR | Sensitivity | 6.5mV / Pa @ 1k | Housing | 4 Piece Precision Machined Brass | Dimensions | Length 5.9" (150mm) |
| Behringer ECM-8000 Omnidirectional Measurement Electret Condenser Microphone
The Behringer ECM8000 Measurement Microphone provides an instantaneous acoustic image of your performance environment. Hear how your room and speakers really sound thanks to a linear frequency response and omnidirectional polar pattern.
Analyse every detail. Whether you're in a live performance venue or recording studio, the ECM8000 works smoothly with real-time analysers such as Behringer's ULTRACURVE. You'll completely remove the guesswork out of EQing.
No unwanted sound. No inaccuracies. The ECM8000 eliminates low-frequency distortion with a transformerless FET input. Just plug in, play, and enjoy pristine signal integrity from a gold-plated XLR connector. With stand adapter and carry case included, you're ready to get to work straight out of the box
Features
- Perfect for analysing audio with an ultra-linear condenser element
- Suitable for room equalisation applications as well as high-fidelity studio and live recording
- Accurate sound capture across an ultra-flat frequency response
- Records audio from all directions with the true omnidirectional polar pattern
- No power supply needed – works with phantom power from +15V to +48V
- Compatible with Behringer’s ULTRACURVE analyser
- Eliminates low-frequency distortion with a transformerless FET input
- Flawless signal integrity from a gold-plated 3-pin XLR connector
- Comes equipped with swivel stand mount and carry case
Specifications
- Type: Electr. Condenser
- Polar Pattern: Omnidirectional
- Impedance: 200 ohms
- Sensitivity: 70dB
- Frequency Response: 20Hz - 20kHz
- Connector: Gold-Plated XLR
- Phantom Power: +15V to +48V
- Weight: 136g
|
- Electret measuring microphone for measuring systems and audio recordings
- Designed for measuring PA systems, speakers and room acoustics
- Perfect complement to any real-time analyzer
- Flat frequency response for high precision
- Sturdy all-metal construction and narrow design
- Polar pattern: Omnidirectional
Type: |
Microphone for measurements |
Capsule type: |
Condenser |
Polar pattern: |
Omnidirectional |
Frequency range: |
20 - 20000 Hz |
S/N ratio: |
>76 dB |
Sensitivity: |
-37 dB |
Max. SPL: |
134 dB |
Phantom power: |
9-52 V DC |
Impedance: |
200 Ohm |
Connections: |
Microphone via 3-pin XLR |
Switch: |
Without |
Material: |
Aluminum |
Color: |
Black |
Dimensions: |
Length: 19,2 cm
Diameter: Ø 13 cm |
Weight: |
100 g |
|
Πυκνωτικό μικρόφωνο shotgun με απόκριση συχνότητας 20Hz - 20KHz, ευαισθησία -36 db re 1Mv Pa, κύκλωμα εξαιρετικά χαμηλού θορύβου και υπερκαρδιοειδές πολικό διάγραμμα.Έχει δυνατότητα λειτουργίας και με μπαταρία 1,5 volt.Περιλαμβάνει αντιανέμιο μαλακή θήκη και βάση.
- Ακουστική αρχή : Line plus Gradient.
- Τύπος κάψας : Σούπερ - Καρδιοειδής.
- Απόκριση Συχνότητας : 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
- Αντίσταση Εξόδου : 250 Ù - phantom power, 350 Ù - battery power
- Λόγος σήματος προς θόρυβο din iec 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
- Σχετικό επίπεδο θορύβου: 18 dB SPL (per IEC651, IEC268-15)
- Μέγιστη Στάθμη Εξόδου spl: 131 dB (@ 1% THD into 1 kÙ)
- Ευαισθησία : -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
- Δυναμική περιοχή din iec 651: 113 dB (per IEC651, IEC268-15)
- Τροφοδοσία : 1.5 V Alkaline Battery or P48 Phantom
- Κατανάλωση : 2.0 mA
-
Βάρος χωρίς μπαταρία : 161 g
-
Διαστάσεις (Υ x Π x B) : 278 x 22 x 22 mm
|
Πυκνωτικό μικρόφωνο μεγάλου διαφράγματος με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –36 db re 1Mv Pa, με ρυθμιζόμενο διακόπτη εξασθένισης, ρυθμιζόμενο φίλτρο διέλευσης υψηλών συχνοτήτων και τρία πολικά διαγράμματα omni-directional, figure of 8, cardioid. Περιλαμβάνει την αντικραδασμική βάση SM2 και την βαλίτσα μεταφοράς RC1.
Tύπος: | Πυκνωτικό | Πολικό Διάγραμμα: | Omni-directional, figure of 8 & καρδιεοειδής | Απόκριση συχνότητας: | 20Hz - 20KHz | Ευαισθησία: | -36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB | Αντίσταση: | 200 ohms | Συνολική αρμονική παραμόρφωση: | 147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum | Διαστάσεις: | - | Βάρος: | 2.6 kg με μπαταρία | Αξεσουάρ: | Αντικραδασμική βάση SM2 και την βαλίτσα μεταφοράς RC1 |
|
Shure WCM16 Πυκνωτικό Μικρόφωνο Κεφαλής
The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.
Features:
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes
Specifications:
Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.