| Content |
- Professional dynamic microphone for instrument and vocal applications
- Frequency response designed for guitar amplifiers, percussions and brass instruments
- Super-cardioid polar pattern minimizes background noise and feedback
- Switchable low-cut, flat and high-frequency boost to match instruments
- Extremely high signal output which lets the sound cut through
- Flat-shaped microphone body, perfectly suited for guitar amp combos and cabinets
- Microphone stand adapter and impact-resistant carrying case included
- Rugged, reliable die-cast body construction
- 3-Year Warranty Program*
- Designed and engineered in Germany
- Frequency Response: 50 Hz to 18 kHz
- Impedance: 600 Ohms
- Sensitivity: -54 dBV/Pa at 1Khz
- Connector: XLR 3 Pin Male
- Color: Black
- Mic Clip Included: Yes
- Hard Case included: Yes
- Microphone Weight: 140g / 494 oz
|
The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
| User's manual [7,20 MB]
Battery disposal information [77,1 KB]
Frequency list [334,8 KB]
Frequency lists / Pin assignment Wireless Systems [538,9 KB]
Data sheet - Microphone for Brass/Wind/Percussioninstruments [7,25 MB]
ΜΙΚΡΟΦΩΝΟ ΓΙΑ ΠΝΕΥΣΤΑ ( ΣΑΞΟΦΩΝΟ, ΤΡΟΜΠΕΤΑ, ΚΛΑΡΙΝΟ Κ.Λ.Π ) - ΚΡΟΥΣΤΩΝ
Linear frequency response, natural sound reproduction, lightweight, easy and stable positioning thanks to the gooseneck, very good impact sound isolation thanks to elastic capsule fastening, strong clamp providing good fastening without causing any damage to the instrument thanks to the soft rubber inner surface of the clips. Phantom Power Adapter LDPHA also available separately.
Specifications: - Converter Principle: Electret Condenser Microphone
- Pick-up Pattern: Cardioid pattern
- Frequency Response: 50 Hz – 18 kHz
- SPL: 133 dB
- Sensitivty: -45 dB +/- 3dB
- Impedance: 250 Ohms +/- 30% @1kHz
- Connections: Mini XLR – 3 pins
- Gooseneck: 70 mm
- Cable length: 1,5 m
- Surface: Black matt
- Weight: 56 g
- Accessories: Wind protection, Phantom power adapter
|
Ζεύγος μικροφώνων C414B-XLS matched pair εργοστασιακά ως προς την απόκριση συχνότητας και την ευαισθησία. Παραδίδονται σε μεταλλική βαλίτσα φύλαξης και μεταφοράς με 2 αντικραδασμικές βάσεις, 2 αντιανεμικά, βραχίονα στήριξης για X/Y recording και αποδεικτικά χαρτιά μετρήσεων. |
The e 904 is a cardioid dynamic instrument microphone especially designed for drums.
Features
Full, impressive, lively sound for drums and percussion
Very fast attack
Compact body ideal for mounting on toms and snare drum
Excellent sound profiling, adapts to all percussive styles
Hum compensating coil
Delivery Includes
e 904 microphone
MZH 604 drum clamp
Pouch
User manual
Technical Data
Pick-up pattern cardioid
Frequency response 40...18000 Hz
Sensitivity in free field, no load (1kHz) 2 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 63 x 41 mm
Weight 125 g
|
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.