BEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover

127.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Αναμένεται Αναμένεται Κωδικός προϊόντος: E013073 Κατηγορία:
  • 2-Way stereo or 3-way mono mode
  • Additional subwoofer output
  • Linkwitz-Riley filter with 24 dB / octave
  • Sub-woofer frequency range separately adjustable
  • Individual output gain controls and output mute switch for all bands
  • 2 Balanced XLR inputs with gold-plated contacts
  • 5 Balanced XLR outputs with gold-plated contacts
  • Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound
  • Easy-to-read status LEDs
  • Built-in power supply 100-240V, 50-60 Hz
  • Dimensions (H x W x D): 44 x 483 x 147 mm
  • Weight: 1.6 kg
  • 2-Way stereo or 3-way mono mode
  • Additional subwoofer output
  • Linkwitz-Riley filter with 24 dB / octave
  • Sub-woofer frequency range separately adjustable
  • Individual output gain controls and output mute switch for all bands
  • 2 Balanced XLR inputs with gold-plated contacts
  • 5 Balanced XLR outputs with gold-plated contacts
  • Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound
  • Easy-to-read status LEDs
  • Built-in power supply 100-240V, 50-60 Hz
  • Dimensions (H x W x D): 44 x 483 x 147 mm
  • Weight: 1.6 kg

 

Διαβάστε περισσότερα

Crossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kg
Βάρος 1.6 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “BEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

BEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover removeJBL CROSSOVER ΓΙΑ VRX 932LA-1 removeRCF DX4008 Ψηφιακός Επεξεργαστής 4 In , 8 Out removeJBL CROSSOVER ΓΙΑ ΗΧΕΙΟ JRX 112M removeBEHRINGER DCX2496 PRO Ultra High-Precision Digital Loudspeaker Management System removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software remove
NameBEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover removeJBL CROSSOVER ΓΙΑ VRX 932LA-1 removeRCF DX4008 Ψηφιακός Επεξεργαστής 4 In , 8 Out removeJBL CROSSOVER ΓΙΑ ΗΧΕΙΟ JRX 112M removeBEHRINGER DCX2496 PRO Ultra High-Precision Digital Loudspeaker Management System removeOMNITRONIC DXO-48E Digital Controller - stereo active crossover 4 inputs - 8 outputs, incl. software remove
ImageBehringer CX2310 Super X Pro V2 1
SKUE013073CROSSOVERVRX932LA1DX4008JBL-364246-001E005260DXO-48E
Rating
Price 127.00 με ΦΠΑ 24% 354.75 με ΦΠΑ 24% 1,674.00 με ΦΠΑ 24% 132.56 με ΦΠΑ 24% 395.00 με ΦΠΑ 24% 590.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 3 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 3 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
  • 2-Way stereo or 3-way mono mode
  • Additional subwoofer output
  • Linkwitz-Riley filter with 24 dB / octave
  • Sub-woofer frequency range separately adjustable
  • Individual output gain controls and output mute switch for all bands
  • 2 Balanced XLR inputs with gold-plated contacts
  • 5 Balanced XLR outputs with gold-plated contacts
  • Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound
  • Easy-to-read status LEDs
  • Built-in power supply 100-240V, 50-60 Hz
  • Dimensions (H x W x D): 44 x 483 x 147 mm
  • Weight: 1.6 kg
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 4 analog inputs and 8 analog outputs (XLR)
  • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
  • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
  • Up to 30 user presets storable in the device via software
ContentCrossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kg

The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets.

The absolute latest in available technology is utilized with 32-bit (40-bit extended) floating point processor and high performance 24-bit Analog Converters. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay,polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. The DX 4008 can be controlled or configured in real time on the panel or with the intuitive PC GUI accessed via the RS 232 interface. Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and function once available. Multiple setup storage and system security complete this professional package.

Features
The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets
Sampling rate can be set to 96kHz
Precise frequency control is achieved with its 1 Hz resolution
Inputs and outputs can be routed in multiple configuration to meet any requirements
The DX 4008 is shipped with a special PC Graphic User Interface (GUI) application - XLink
XLink gives the user an option to control the DX 4008 unit from a remote PC via the RS232 serial communication link
The GUI application makes much easier control and monitor the device, allowing the user to get the whole picture on one screen
Programs can be recalled and stored from/to PC's hard drive, thus expanding the storage to become virtuality limitless
INPUT AND OUTPUT SECTION
Input Impendance:>10kΩ
Output Impendance:50
Maximum Level:+ 20dBu
Type:XLR 3Electronically balanced
AUDIO PERFORMANCE
Frequency Response:+/- 0.1dB (20 to 20 kHz)
Dynamic Range:115dB typ (unweighted)
CMMR:> 60dB (50 to 10 kHz)
Crosstalk:dB
Distortion:0.001%(1 kHz @ 18 dBu)
DIGITAL AUDIO PERFORMANCE
Resolution:32 bit(40-bit extended)
Sampling Rate:48 / 96kHz
A/D - D/A Converters:24bit
Propagation Delay:3ms
No. of Programs:30 
FRONT PANEL CONTROL
Display:4 x 26Character Backlit LCD
Buttons:12 Mute Controls 12 Gain / Manu Controls 6 Menu Controls 
“DATA" control:(dial encoder)Embedded Thumb Wheel
Level Meters:5segment LED
InterfaceRS 232Female DB-9
LIMITERS
Threshold:-20 to +20dBu
Attack Time:0.3 to 100ms
Release Time:2 to 32X the attack time
EQUALISATION
Type:Parametric, Hi-shelf, Lo-shelf6 per I/O
Gain:in 0.25dB steps-30 to +15dB
Bandwidth:(Q=0.5 to 72)0.02 to 2.50 octaves
CROSSOVER FILTERS
Filter Types:Butterworth, Bessel, Linkwitz Riley 
Slopes:6 to 24dB/oct (96kHz)6 to 48dB/oct (48kHz)
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60V ~ Hz
Power (consumption): mA
Fuse model:  
Operating temperature range:0 ÷ +55°C
Operating humidity:20 ÷ 90% RH non-condensing
PHISICAL SPECIFICATION
Height:44 / 1.73mm/inch
Width:483 / 19.01mm/inch
Depth:203 / 7.99mm/inch
Net Weight:Kg/Lbs3 / 6.61
SHIPPING INFORMATION
Package height:80 / 3.14mm/inch
Package width:615 / 24.2mm/inch
Package depth:360 / 14.17mm/inch
Shipping Weight:4.3 / 9.4Kg/Lbs

 

Crossover Xover 352921-003 / 364246-001 for the JBL JRX-112M, JRX112M, and JRX 112M cabinet

JBL JRX-112M Specifications:
  • 2-Way
  • 1.8kHz Crossover Frequency
  • 250W RMS / 1000W Peak
  • 8 ohm Nominal Impedance
  • (1) 1/4" Jack
  • (1) Neutrik Speakon Jack NL4MP
    (both jacks can be used for input & output)
  • Plate Size: 5.5" Wide x 3 7/8" High
  • Cabinet Hole Cutout: 4 5/8" x 3 1/8
crossover_jrx112
  • Automatic or manual-adjustable delays for all inputs and outputs allow for adjustment due to room temperature, phase and arrival time differences
  • Link option via RS-485 network interface allows for linking multiple units for larger installation requirements
  • Downloadable software enables single- or multiple-unit remote control utilizing a Windows based computer
  • Sixty user-defined internal presets can bestored via software or on a PCMCIA card
  • Internal universal power supply allows the unit to operate virtually anywhere
  • Frequency Response 10Hz to 35kHz, -1dB
    Dynamic Range 109dB
    Input Connections 3 x XLR
    Output Connections 6 x XLR
    Input Impedance 20kΩ @ 1kHz
    Output Impedance 160Ω @ 1kHz
    Maximum Input Level +22dBu
    Maximum Output Level +22dBu
    Sample Rate 32kHz to 96kHz
    RTA Mic Phantom Voltage +15V
    Crosstalk (Main Outputs) -100dB @ 10dBu In
    THD & Noise 0.007% @ 0dBu In
    Dimensions 19" x 8.5 x 1.75" (483 x 217 x 45mm)
    Weight 6.6 lbs (3 kg)

    Digital stereo active crossover with 4 inputs and 8 outputs, incl. software .

    • Flexible routing configurations for all standard mono and stereo output operating modes
    • 4 analog inputs and 8 analog outputs (XLR)
    • Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
    • Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
    • Up to 30 user presets storable in the device via software
    • 5 menu languages selectable (German, English, French, Spanish, Dutch)
    • Alphanumeric LCD screen with 2 lines of 16 characters each
    • Input sensitivity digitally adjustable
    • Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
    • Mute switch with LED indicator per output
    • 7-band parametric EQ per output
    • Up to 7 ms signal delay adjustable for the outputs
    • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
    • Switchable phase
    • Lock function for prevents undesired changes to settings
    • Rack installation, 1 U
    • Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
    • Digital signal processor
    • The device can be connected via USB to the PC in connection with DXO Software The firmware can be updated via the PC connection
    • (19") 48.3 cm rack installation 1 U
    Power supply: 100-240 V AC, 50/60 Hz 6 V DC 800 mA
    Power connection: Mains input via Coaxial power connector (M) power supply cord with AC adapter (provided)
    Frequency range: 10 - 22000 Hz
    THD: <0,005 % at 1 kHz
    DSP: Digital signal processor
    Crossover frequency: 20-20000 Hz
    Impedance: Input 10 kOhm Output 50 Ohm
    Gain: Output: -50 dB to +12 dB
    Filter: Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
    Delay: 0 - 7 ms
    Dynamic range: Input: 114 dB Output: 110 dB
    Sample rate: 48 kHz
    Connections: Input: line via 4 x 3-pin XLR Output: line via 8 x 3-pin XLR
    Max. level: Input: +22 dBu Output: +9 dBu
    USB port: Typ B
    PC connect: DXO Software via USB, firmware can be updated
    Housing design: (19") 48.3 cm rack installation 1 U
    Dimensions: Width: 48,3 cm Depth: 22,3 cm Height: 4,45 cm
    Weight: 1,90 kg
     
    Weight1.6 kg1.00 kg4.30 kg0.60 kg3.00 kg2.25 kg
    DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ52.5 × 25 × 8 cm
    Additional information
    Βάρος 1.6 kg
    Βάρος 1.00 kg
    Βάρος 4.30 kg
    Βάρος 0.60 kg
    Βάρος 3.00 kg
    Βάρος 2.25 kg
    Διαστάσεις 52.5 × 25 × 8 cm