| Content |
The Soundweb London BLU-80 offers configurable I/O, configurable signal processing and CobraNet audio.
The BLU-80 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
This processor features CobraNet audio with primary and secondary ports for fault tolerance. Control is through a separate Ethernet port which allows CobraNet and control networks to be easily separated or mixed depending upon requirements.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-80 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-80 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
KEY FEATURES:
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Digital Outputs (AES/EBU and S/PDIF)
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- CobraNet Audio
- Clear Front Panel LED Indication
- Informative Front Panel Display
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO Integration
- Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
- HiQnet Device
- Configuration, Control and Monitoring from
- HiQnet London Architect
|
Ψηφιακός επεξεργαστής ηχείων 1U, με 2 εισόδους και 6 εξόδους, 24-bit/96 kHz A/D and D/A converters. Διαθέτει διαφορετικούς τύπους eqʼs (LP/BP/HP) για κάθε είσοδο και έξοδο, 60 διαθέσιμες μνήμες. Είναι εφοδιασμένο με Servo-balanced και gold-plated XLR connectors για όλες τις εισόδους και εξόδους.
- 2 analog inputs and 6 analog outputs for maximum flexibility
- High-end 96 kHz converters for ultimate signal integrity and wide dynamic range (120 dB)
- Precise Dynamic EQs for level-dependent equalization and extremely musical Parametric EQs, selectable for all inputs and outputs
- Several types of EQs (LP/BP/HP) for each input and output
- “Zero“-attack Limiters on all output channels for optimal speaker protection
- Four different mono and stereo output operating modes
- Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics from 6 to 48 dB/octave
- Adjustable Delays for all inputs and outputs—allow manual or automatic correction for room temperature, phase and arrival time differences
- 60 user-defined internal presets storable
- Servo-balanced, gold-plated XLR connectors for all inputs and outputs
- Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
| DBX 223XS
Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross,
ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα,
L & R είσοδοι & balanced έξοδοι με XLR.
Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Specifications
| Input Connectors |
XLR (pin 2 hot) |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
| Max Input |
>+22dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| Output Connectors |
XLR |
| Output Type |
Impedance-balanaced/unbalanced, RF filtered |
| Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
| Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
| Bandwidth |
20Hz to 20kHz, +/-0.5dB |
| Frequency Response |
< 3 Hz to > 90 kHz, +0/-3 dB |
| Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
| Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
| Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
| Dynamic Range |
> 106 dB, unweighted, any output |
| THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
| Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
| Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
| Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
| Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
| Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
| x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
| Mode Switch |
Selects stereo/mono and 2/3-way operation |
| LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
| Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
| Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
| Operating Temperature |
32°F to 113°F (0°C to 45°C) |
| Power Consumption |
15W |
| Power Connector |
IEC receptacle |
| Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
| Unit Weight |
3.7 lbs. (1.7 kg) |
| Shipping Weight |
5.4 lbs. (2.5 kg) |
|
Ψηφιακός επεξεργαστής ηχείων, 24 bit Delta-Sigma AD/DA, 2 in 6 out, με διάφορους τύπους φίλτρων, παραμετρικά EQ, delays, δυναμικούς επεξεργαστές. Ψηφιακή είσοδο AES/EBU (2 Ch.) USB θύρα επικοινωνίας με υπολογιστή.
| Κατασκευαστής |
DYNACORD |
| Rack Mount |
Ναι |
| Είσοδοι / Έξοδοι |
2/6 |
| Μοντέλο |
DSP260 |
| Part Number |
F01U100852 |
| Εγγύηση |
3 Χρόνια Εγγύηση |
|
Ψηφιακός επεξεργαστής ηχείων 3 IN x 6 OUT. Με νέο AutoEQ σύστημα αλγόριθμων. Διαθέτει είσοδο RTA για μικρόφωνο μετρήσεων, αντί ?μικροφωνικό σύστημα AFS, ισοσταθμιστή 31 περιοχών, παραμετρικό EQ 12 περιοχών (8 AutoEQs - 4 UserEQs), γεννήτρια υπό -αρμονικών χαμηλών συχνοτήτων, backline delay, Noise Gate, XLR είσοδοι - έξοδοι, 2 AES ψηφιακές είσοδοι (στις αναλογικές εισόδους 1&2), 6 έξοδοι μονοφωνικών ζωνών crossover, 8 περιοχών παραμετρικό EQ για κούρδισμα των ηχείων, θύρα Ethernet, USB, ασύρματη σύνδεση συμβατό με Android, iOS, Mac, Windows. |
The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets.
The absolute latest in available technology is utilized with 32-bit (40-bit extended) floating point processor and high performance 24-bit Analog Converters. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay,polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. The DX 4008 can be controlled or configured in real time on the panel or with the intuitive PC GUI accessed via the RS 232 interface. Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and function once available. Multiple setup storage and system security complete this professional package.
| Features |
|---|
| The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets | | Sampling rate can be set to 96kHz | | Precise frequency control is achieved with its 1 Hz resolution | | Inputs and outputs can be routed in multiple configuration to meet any requirements | | The DX 4008 is shipped with a special PC Graphic User Interface (GUI) application - XLink | | XLink gives the user an option to control the DX 4008 unit from a remote PC via the RS232 serial communication link | | The GUI application makes much easier control and monitor the device, allowing the user to get the whole picture on one screen | | Programs can be recalled and stored from/to PC's hard drive, thus expanding the storage to become virtuality limitless |
| INPUT AND OUTPUT SECTION |
|---|
| Input Impendance: | >10 | kΩ | | Output Impendance: | 50 | Ω | | Maximum Level: | + 20 | dBu | | Type: | XLR 3 | Electronically balanced |
| AUDIO PERFORMANCE |
|---|
| Frequency Response: | +/- 0.1 | dB (20 to 20 kHz) | | Dynamic Range: | 115 | dB typ (unweighted) | | CMMR: | > 60 | dB (50 to 10 kHz) | | Crosstalk: | | dB | | Distortion: | 0.001% | (1 kHz @ 18 dBu) |
| DIGITAL AUDIO PERFORMANCE |
|---|
| Resolution: | 32 bit | (40-bit extended) | | Sampling Rate: | 48 / 96 | kHz | | A/D - D/A Converters: | 24 | bit | | Propagation Delay: | 3 | ms | | No. of Programs: | 30 | |
| FRONT PANEL CONTROL |
|---|
| Display: | 4 x 26 | Character Backlit LCD | | Buttons: | 12 Mute Controls 12 Gain / Manu Controls 6 Menu Controls | | | “DATA" control: | (dial encoder) | Embedded Thumb Wheel | | Level Meters: | 5 | segment LED | | Interface | RS 232 | Female DB-9 |
| LIMITERS |
|---|
| Threshold: | -20 to +20 | dBu | | Attack Time: | 0.3 to 100 | ms | | Release Time: | 2 to 32 | X the attack time |
| EQUALISATION |
|---|
| Type: | Parametric, Hi-shelf, Lo-shelf | 6 per I/O | | Gain: | in 0.25dB steps | -30 to +15dB | | Bandwidth: | (Q=0.5 to 72) | 0.02 to 2.50 octaves |
| CROSSOVER FILTERS |
|---|
| Filter Types: | Butterworth, Bessel, Linkwitz Riley | | | Slopes: | 6 to 24dB/oct (96kHz) | 6 to 48dB/oct (48kHz) |
| POWER REQUIREMENT |
|---|
| Operating voltage: | 220÷240 / 110÷120 ~ 50 / 60 | V ~ Hz | | Power (consumption): | | mA | | Fuse model: | | | | Operating temperature range: | 0 ÷ +55 | °C | | Operating humidity: | 20 ÷ 90 | % RH non-condensing |
| PHISICAL SPECIFICATION |
|---|
| Height: | 44 / 1.73 | mm/inch | | Width: | 483 / 19.01 | mm/inch | | Depth: | 203 / 7.99 | mm/inch | | Net Weight: | Kg/Lbs | 3 / 6.61 |
| SHIPPING INFORMATION |
|---|
| Package height: | 80 / 3.14 | mm/inch | | Package width: | 615 / 24.2 | mm/inch | | Package depth: | 360 / 14.17 | mm/inch | | Shipping Weight: | 4.3 / 9.4 | Kg/Lbs |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.