| Stock | Διαθέσιμο κατόπιν παραγγελίας
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
|
| Content |
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features
Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible)
CD playback
Optional digital volume and channel balance control
Balanced XLR and unbalanced RCA analogue audio outputs
USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
ATF2™ audio up-sampling to 24-bit/384kHz
Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging
Selectable digital filters – linear phase, minimum phase, steep
Audiophile grade toroidal transformer delivering ultra-low low noise and distortion
Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control
RS232 controllable
Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control
Available in black and silver finishes
|
- Ultra compact phono preamplifier and equalizer
- Proper RIAA equalization
- RCA inputs and outputs
- 6.3 mm stereo headphone output connector
- Sturdy metal housing
- 12 V AC/DC adapter included
The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards. The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB. The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.
Product type
Other Studio and Recording Equipment
Type
Stereo Input / Stereo Output
Frequency response
RIAA Curve Hz
Signal-to-noise ratio
70 dB
THD |
THORENS MM-FLEX
The Thorens MM-Flex phono preamp is a high-quality preamplifier with portability in mind. Attach it to any surface with the included velcro adhesive—and better yet, due to its size you can take it with you! The Thorens MM-Flex is ideal for the on the go audiofile who may find themselves in a warehouse, surrounded by a particularly large sound system...for whatever reason.
MM-FLEX FEATURES
- Compact MM phono preamplifier
- Attaches to rear of turntable with integrated Velcro strip
- Can be easily removed and re-fitted without irreversible modification
|
- Input impedance, MM 47kohms/120pF
- Input impedance, MC 100ohms/120pF
- Gain, MM 40dB
- Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
- Gain, MC 60dB
- Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
- Max. output 9,5V (1kHz)
- Noise floor, MM 86dB (94dB - A weighted)
- Noise floor, MC 68dB (75dB - A weighted)
- THD, MM 0,01%
- THD, MC 0,05%
- RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
- A/D converter -Bit Delta Sigma
- USB output digital serial data protocol USB 1.1
- Operating systems Windows®, MacOS® and Linux®
- THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
- Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply
Manual/Εγχειρίδιο
|
- Input impedance : 47kohms
- Input capacitance : 120pF
- Gain : 40dB
- Output voltage(typically) : 500mV @ 1KhZ with 5mV input
- Noise floor : 88dB (A weighted)
- THD :
|
- Input impedance 47kohms/100pF
- Gain 32dB
- Output voltage typically 200mV/1kHz at 5mV/1kHz
- Noise floor 82dB (88dB - A weighted)
- THD
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.