DAP AUDIO D4530 Qi-4200 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x200W

	DAP AUDIO D4530 Qi-4200 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x200W remove	LD Systems DEEP2 4950 Power Amplifier 4 x 810W 4 Ohm remove	ELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier remove	RAM AUDIO T-1208 Ενισχυτής Ισχύος 8x150 Watts remove	RAM AUDIO S-4044 Ενισχυτής Ισχύος 4x975 Watts (4Ω) remove	YAMAHA XM-4080 Τελικός Ενισχυτής 4x80W remove
Name	DAP AUDIO D4530 Qi-4200 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x200W remove	LD Systems DEEP2 4950 Power Amplifier 4 x 810W 4 Ohm remove	ELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier remove	RAM AUDIO T-1208 Ενισχυτής Ισχύος 8x150 Watts remove	RAM AUDIO S-4044 Ενισχυτής Ισχύος 4x975 Watts (4Ω) remove	YAMAHA XM-4080 Τελικός Ενισχυτής 4x80W remove
Image
SKU	D4530	LDDP4950	004383	T-1208	S-4044	H060.00045
Rating
Price	€613.79 Original price was: €613.79.€520.79Current price is: €520.79. με ΦΠΑ 24%	€892.79 Original price was: €892.79.€803.51Current price is: €803.51. με ΦΠΑ 24%	€2,294.00 με ΦΠΑ 24%	€1,140.79 Original price was: €1,140.79.€1,044.57Current price is: €1,044.57. με ΦΠΑ 24%	€2,343.59 Original price was: €2,343.59.€1,920.75Current price is: €1,920.75. με ΦΠΑ 24%	€993.00 Original price was: €993.00.€957.73Current price is: €957.73. με ΦΠΑ 24%
Stock	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα
Availability	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα
Add to cart	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι
Description
Content	The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it's connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time. Specifications Output power Stereo 4Ohm: 4x 200W Stereo 8Ohm: 4x 120W Bridge 8Ohm: 2x 400W Parameters S/N Ratio: >90dB Input sensitivity: 0,65V Input impedance: 20kOhm Bal./10Kohm unbal. Technology: Class-D Protection: short circuit, DC, RF, Soft start Cooling: Temp controlled fan Power supply: SMPS Connections Input: 4x XLR Output: 4x Speaker connector Power: IEC Physical Dimensions: 388 x 435 x 44 (WxHxD) Installation depth: 370 (excl. conn.) Weight: 5.8Kg Electrical Input Voltage: 100~240VAC...50/60Hz Power consumption: 500W	The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio. Product type Power Amplifiers Type PA Power Amplifiers Rated ouput power (1kHz @ 4 Ohms) 4 x 810 W Rated ouput power (1kHz @ 8 Ohms) 4 x 490 W Rated ouput power (1kHz @ 8 Ohms, bridged) 2 x 1600 W Output circuitry Class H Frequency response 20 - 20000 Hz Total Harmonic Distortion (THD) < 0.1 % Signal-to-noise ratio 105 dB Damping factor > 400 Crosstalk >70 dB Gain 38 dB Input sensitivity 0.775 V Protection circuits DC protection , short circuit , thermal overload Controls 4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off) Indicators Limit , Power , Protect (protection circuit engaged) , Signal Loudspeaker outputs 4 Speaker output connections Speakon compatible Cooling highly efficient, automatic Operating voltage transformer Operating voltage 230 V AC / 50-60 Hz Weight 19,6 kg	Τετρακάναλος τελικός ενισχυτής 2U,τάξης D, το κάθε κανάλι αποδίδει 500 Watt/4Ω/100V/70V με απόκριση συχνότητας 15Hz-30KHz. Βάρος 11,1 kg. Διαθέτει slot για το module RCM810 για έλεγχο του ενισχυτή μέσω του IRIS-NET software.	• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis OUTPUT POWER T-604 T-1204 T-1208 T-2408 RMS, 1kHz, 1.0% THD+N 4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W 8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W Pink Noise 12dB CF 4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) 

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Τετρακάναλος τελικός ενισχυτής ζωνών, ισχύος 4 x 80 Watt / 8Ω RMS, 4 x 115 Watt /4Ω RMS,
2 x 230 Watt / 8Ω bridge RMS, ξεχωριστή ρύθμιση έντασης ανά κανάλι, HPF σε κάθε κανάλι,
εισόδους XLR και Euro block, με δυνατότητα κοινής εισόδου κατόπιν επιλογής.

Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 8Ω 80W x 4
Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 4Ω 115W x 4
Sensitivity, RL=8. Att.max +4dB
S/N Ratio, 20Hz-20kHz (DIN AUDIO) 100dB
Idle Power Consumption 40W
1/8 Power Consumption (4Ω) 500W
Power Bandwidth, (Half power THD+N=0.5%) 10Hz – 40kHz
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response, f=20Hz-20kHz -0.5dB, 0dB, 0dB
Residual Noise, 20Hz-20kHz(DIN AUDIO) -70dB
Voltage Gain, 8Ω, f=1kHz 100
Sensitivity, ATT. max 26dB
Maximum Input Voltage 22dB
Input Impedance 30kΩ (balance) 15kΩ (unbalance)
Controls, Front panel POWER switch (push on/push off), attenuator (31position) x 4
Controls, Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 2 HPF switch (OFF/20Hz/55Hz 12dB/oct) x 2
Connectors, Output 5–way binding post/ch
Connectors, DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch, Model Detect Control:Mute/ch
Connectors, Power AC inlet x 1
Indicators, POWER x 1 (Green)
Indicators, SIGNAL x 4(Green)
Indicators, CLIP/LIMIT x 4 (Red)
Indicators, PROTECT/MUTE x 4 (Red)
Load Protection POWER switch on/off mute, DC-fault output relay off
Power Requirements UC: 120V / 60Hz,
Weight 10kg (22 lbs.)
Dimensions (W x H x D) 480 x 88 x 412.2 mm (18-7/8" x 3-7/16" x 16-1/4“)