| Content |
Advanced Feedback Suppression® Processor with Full LCD Display
Hear No Evil and See no Evil.
The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.
With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®
Features
- Wizard Setup Function
- Full LCD Display
- dbxʼs patented (Advanced Feedback Suppression) AFS™ technology
- 24 Programmable Filters per Channel
- Stereo or Dual Independent Channel Processing
- Live and Fixed Filter Modes
- Selectable Filter Lift Times
- Application-specific filter types include: Speech and Music Low, Med and High
- Input channel Metering
- 24 LED per Channel Filter Metering
- XLR and TRS Inputs and Outputs
Specifications |
Number of Inputs
|
2
| |
Input Connectors
|
Female XLR and 1/4” TRS
| |
Input Type
|
Electronically balanced/unbalanced, RF filtered
| |
Input Impedance
|
Balanced 50kΩ, Unbalanced 25kΩ
| |
Max input line level
|
+20 dBu
| |
CMRR
|
> 40dB, typically >55dB @ 1kHz
| |
Number of Outputs
|
2
| |
Output Connectors
|
Male XLR and 1/4” TRS
| |
Output Type
|
Electronically balanced/unbalanced, RF filtered
| |
Output Impedance
|
Balanced >120 Ω, Unbalanced >60 Ω
| |
Max Output Level
|
+20 dBu
| |
A/D Converter
|
dbx Type IV™ Conversion System
| |
A/D Dynamic Range
|
>113 dB A-weighted, >110 dB unweighted, 22kHz BW
| |
Type IV Dynamic Range
|
>119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW
| |
A/D Conversion
|
24-bit
| |
Sample Rate
|
48kHz
| |
D/A Dynamic Range
|
112 dB A-weighted, 109 dB unweighted
| |
D/A Conversion
|
24-bit
| |
Dynamic Range
|
109 dB A-weighted, 106 dB unweighted, 22kHz BW
| |
THD+Noise
|
0.003% typical at +4 dBu, 1 kHz
| |
Frequency Response
|
20Hz – 20kHz, +/- 0.5dB
| |
Interchannel Crosstalk
|
>80 dB typical
| |
Crosstalk input to output
|
>80 dB
| |
Operating Voltage
|
100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
| |
Power Consumption
|
9 W
| |
Unit Weight
|
4.5 lbs. (2.04 kg)
| |
Dimensions
|
1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
|
|
Νέα έκδοση S ηλεκτρονικού crossover 3 δρόμων με επιλεγόμενη συχνότητα cross, ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα, L & R είσοδοι & balanced έξοδοι με XLR.
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
| Input Connectors | XLR | | Input Type | Electronically balanced/unbalanced, RF filtered | | Input Impedance | Balanced >50k ohm, unbalanced >25k ohm | | Max Input | >+22dBu balanced or unbalanced | | CMRR | >40dB, typically >55dB at 1kHz | | Output Connectors | XLR | | Output Type | Impedance-balanaced/unbalanced, RF filtered | | Output Impedance | Balanced 200 ohm, unbalanced 100 ohm | | Max Output | >+21dBu balanced/unbalanced into 2k ohms or greater | | Bandwidth | 20Hz to 20kHz, +/-0.5dB | | Frequency Response | 90 kHz, +0/-3 dB | | Signal to Noise Ratio | Ref: +4 dBu, 22 kHz measurement bandwidth | | Signal-to-Noise (Stereo Mode) | >94dB (Low Output), >93dB (Mid Output), >90dB (High Output) | | Signal-to-Noise (Mono Mode) | >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output) | | Dynamic Range | > 106 dB, unweighted, any output | | THD+Noise | | | Interchannel Crosstalk | | | Crossover Frequencies (Stereo Mode) | Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting) | | Crossover Frequencies (Mono Mode) | Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz | | Crossover Filter Type | Linkwitz-Riley, 24 dB/octave, state-variable | | Low cut Switch | Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. | | Phase Invert Switch | Inverts the phase at the output, one switch per output. | | x1 / x10 Switch | Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. | | Mode Switch | Selects stereo/mono and 2/3/4-way operation | | LF Sum Switch | Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. | | Indicators | Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) | | Operating Voltage | 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz | | Operating Temperature | 32°F to 113°F (0°C to 45°C) | | Power Consumption | 15W | | Power Connector | IEC receptacle | | Dimensions | 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) | | Unit Weight | 4.0 lbs. (1.8 kg) | | Shipping Weight | 5.8 lbs. (2.6 kg) |
|
DBX ZONEPRO 640
Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 6 in/4 out. Διαθέτει AGC
(automatic gain leveler) EQ, crossover, limiter, compressor, noise gate, parametric
EQ, security lockout, AFS περιοριστή μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση
μέσω pc. Δέχεται τα wall panel dbx ZC. ιδανικό για: ξενοδοχεία, εμπορικά κέντρα,
καταστήματα, bar restaurants, cafe.
|
Ψηφιακός επεξεργαστής ηχείων, 24 bit Delta-Sigma AD/DA, 2 in 6 out, με διάφορους τύπους φίλτρων, παραμετρικά EQ, delays, δυναμικούς επεξεργαστές. Ψηφιακή είσοδο AES/EBU (2 Ch.), USB θύρα επικοινωνίας με υπολογιστή.
Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.
A/D Conversion 24-Bit Delta-Sigma
A/D Conversion 24-bit/sigma-delta (linear phase) 128 times oversampling
Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs 6 XLR (Electronically Balanced)
Control Protocol Front Panel USB Connector
D/A Conversion 24-bit/sigma-delta 128 times oversampling
D/A Conversion 24-Bit Delta-Sigma
Data Format 24-Bit
Digital Inputs 1 XLR AES/EBU (2 Ch)
Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz)
Electronics Type Processor
FIR-Drive No
Frequency Response 10 Hz - 22 kHz (±0.5 dB)
Input Impedance (Balanced) 10 kΩ
Internal Processing 32-Bit Floating Point
Mains Voltage 100-240 VAC
Maximum Input Voltage 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Output Voltage 8.7 V / +21 dBu
Nominal Input Voltage 1.23 V / +4 dBu
Nominal Output Voltage 1.23 V / +4 dBu
Output Impedance (Balanced) 50 Ω
Power Consumption 25 W
Sample Rate 48 kHz
THD+N < 0.01% (band limited 22 Hz - 22 kHz)
Height 1RU 44.45 mm (1.75“)
Width 482.6 mm (19“)
Depth 355.6 mm (14“)
Weight Net 4.6 kg (10.14 lbs) |
Ψηφιακός επεξεργαστής ηχείων 2 εισόδων, 6 εξόδων με δυνατότητα ρυθμίσεων για, crossover, delay, PEQ, compressor, limiter, gain, polarity. Διαθέτει ψηφιακή είσοδο AES/EBU και υποδοχή RJ-45 ethernet για σύνδεση με H/Y. Υποστηρίζει το λογισμικό DME Designer της ΥΑΜΑΗΑ.
| Sampling Frequency | Internal Clock | 96kHz | | External Clock | Normal Rate | 44.1, 48kHz (±0.1%) | | Double Rate | 88.2, 96kHz (±0.1%) | | Signal Delay | 761µsec Input to Output, fs = 96kHz | | Frequency Response | 20Hz -40kHz (TYP 0dB, MAX +0.5dB, MIN -1.0dB), fs=96kHz, RL=600ohms | | Total Harmonic Distortion | 0.007% (+22dBu@1 kHz),
0.05% (+4dBµ@20 Hz - 40kHz)
fs=96kHz, RL=600ohms;
measured with 18dB/octave filter @80kHz | | Hum & Noise | TYP -82dBu,
fs=96kHz, RL=600ohms, Rs=150 ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞ dB/octave attenuation. | | Dynamic Range | 106dB AD+DA
fs=96kHz, RL=600ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞dB/octave attenuation. | | Crosstalk @1kHz | -80dB INPUT to Output
fs=96kHz, measured with 18dB/octave filter @80kHz | | Power Consumption | 30W | | Dimensions (W x H x D) | 480 x 44x 360.2mm | | Net Weight | 4.2kg |
|
Μέσω του NLB 60E επιτυγχάνουμε την εποπτεία καθώς και τη λειτουργία των ενισχυτών C Series.
Παρέχεται η δυνατότητα σύνδεσης μέχρι και 60 ενισχυτές C Series
Με τη βοήθεια του υπολογιστή και του αντίστοιχου προγράμματος που παρέχεται από τη LAB GRUPPEN, αυτόματα αναγνωρίζεται το δίκτυο των ενισχυτών C Series και μπορούν να ελεγχθούν, όπως επίσης να πάρουμε πληροφορίες για τη λειτουργία των ενισχυτών.
2XRJ45 IN AND OUT Ethernet Connectors
Auto Sensing 100V-240V AC
2x Contact Closure GPI
1x Voltage Sense GPI
Διαστάσεις: Π: 48.3cm (19”), Y: 4.4cm (1U), B: 20,8cm (8,2”)
Βάρος: 2,25 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.