Content |
The DBX ZonePRO™ 641M offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The DBX Zone PRO 641M features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 641M device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured.
AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The DBX ZonePRO™ 641M Digital Zone Processor Main Features Include:
- 12 Inputs / 6 Outputs
- 6 Balanced Mic/Line Inputs
- 4 Unbalanced, Mono-Summed RCA Input Pairs
- S/PDIF Input
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Comprehensive Signal Metering
- Front Panel LCD
- 9 User-Specified Front Panel Control
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
- Weight: 6.2 lbs / 2.81 kg
- Dimensions: 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)
|
Dante is a network technology for multi-channel transmission of digital audio data. The DM-1 compact interface module allows EV's NetMax System Controller to connect to a Dante network, enabling the simultaneous transmission of up to 32 digital audio input signals and 32 digital audio outputs.
* Designed for Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Pro Music, Stadium Systems, and other applications.
* Gigabit primary and secondary Ethernet interfaces Typical latency: 1 mS Dante Zen device discovery Compatible with Dante Virtual Soundcard
|
* Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications. * 300 MIPS computing capacity - doubles the DSP power of a NetMax System Controller * Two RAM banks (512k x 24 Bit) - allow for additional delay lines up to 21.8 seconds * 48-bit signal processing. * Double precision DSP algorithms. * Automatic configuration - signals whether a new module has been inserted, or if one has been removed. |
The NAI48-ES is a digital audio network interface that uses the EtherSound network protocol. Digital mixing consoles such as the Yamaha PM5D, M7CL, or LS9 can be connected to AD8HR 8-channel microphone preamp/AD converter or DA824 DA converter units via the NIA48-ES for remote analog input or output interfacing on stage or wherever needed. This type of system eliminates noise problems that are unavoidable with conventional analog console plus multi-cable type setups, and dramatically reduces microphone cable length for superior sound quality. Cabling between the console and "stage box" units is also simplified for fast, easy setup.
48 channels of digital audio each way over a single Cat-5 Ethernet cable
EtherSound™ Networking Uncompromising Yamaha Quality, Compatibility, and Reliability
General specifications
Sampling Frequency | 42.9975kHz to 49.2kHz
85.995kHz to 98.4kHz | Maximum I/O channel count | 48 IN/48 OUT (44.1/48kHz), 32 IN/32 OUT (88.2/96kHz) | Power requirements | AC100-240V 50/60Hz, and/or DC12V | Power consumption | 12W | Dimensions (W x H x D) | 480 x 44 x 150mm | Weight | 2.6kg |
Digital I/O characteristics
Terminal | Format | level | Connector |
---|
AES/EBU
1-6 | IN | AES/EBU | RS422 | D-sub 25P | OUT | EtherSound™ | IN | 100Base-TX | 100Base-TX | RJ-45 | OUT |
Control I/O characteristics
Terminal | Level | Connector |
---|
WORD CLOCK | IN | TTL/75Ω | BNC | OUT | HA Remote | RS422 | D-sub 9P |
|
Analog Inputs Modular
Analog Outputs Modular
Audio Network CobraNet CM-1 Module (optional)
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs Modular
Digital Outputs Modular
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control) 3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact)3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS), DSP-2 Extension Module (3 dual core processors-1200 MIPS total) , 1 DSP per Audio Module (100 MHz, 100 MIPS) 1500 MIPS total without I/O cards
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 381 mm (15“)
Weight Net 7.37 kg (16.25 lbs)
| Μονάδα matrix 4x4 σε stereo λειτουργία και 8x8 σε mono. Mε οκτακάναλο ψηφιακό ενισχυτή με ισχύ 30W ανά κανάλι. Τέσσερεις ενσωματωμένους ραδιοφωνικούς δέκτες. Δυνατότητα ελέγχου και προγραμματισμού μέσω Η/Υ, tablet, smartphone. Είσοδο emergency mute contact για αναγγελίες εκτάκτου ανάγκης. Σύνδεση με επιτοίχια χειριστήρια DIWAC. Σύνδεση με κονσόλες ανακοινώσεων. 8 ζώνες εξόδου ρυθμιζόμενες. Ethernet control. Είσοδο priority contact. Chime ρυθμιζόμενο. 483x44x308 mm 1U, 4.05Kg. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.