DBX ZONEPRO 641M ΨΗΦΙΑΚΟΣ ΕΠΕΞEΡΓΑΣΤΗΣ 6/4 (4MIC/LINE)

The DBX ZonePRO™ 641M offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The DBX Zone PRO 641M features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 641M device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured.

AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The DBX ZonePRO™ 641M Digital Zone Processor Main Features Include:

• 12 Inputs / 6 Outputs
• 6 Balanced Mic/Line Inputs
• 4 Unbalanced, Mono-Summed RCA Input Pairs
• S/PDIF Input
• Microphone Gain per Channel
• Pre-Configured Architecture
• Two Configurable Input Insert Positions
• One Configurable Output Insert Position
• AutoWarmth® per Output Zone
• Link Bus
• Comprehensive Signal Metering
• Front Panel LCD
• 9 User-Specified Front Panel Control
• Optional ZC Controllers
• Ethernet Control
• Serial Control
• Third Party Control
• Wizard-Driven Configuration
• Weight: 6.2 lbs / 2.81 kg
• Dimensions: 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)

Audio Network    CobraNet CM-1 Module (optional)
CAN Bus Interface    2 x RJ-45
Cooling    Left-to-right, 3-stage fan
Data Format    24 Bit linear A/D and D/A conversion, 48 Bit processing
FIR-Drive    Yes
GPIO Control Port    2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing    2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS)
Network Control (IRIS-Net)    Yes
Network Interface    Ethernet-10/100 MBit/s, RJ-45
Power Consumption    90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply    100 - 240 VAC, 50/60 Hz
Sample Rate    48 kHz internal
Serial Interface    2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted)    115 dB
Total Harmonic Distortion    0.01 %
Height    2RU 88.1 mm (3.47“)
Width    483 mm (19.02“)
Depth    381 mm (15“)
Weight Net    7.37 kg (16.25 lbs)

• Συνδέστε 2 τηλεοράσεις ή βιντεοπροβολείς και κάντε εναλλαγή μεταξύ 4 συνδεδεμένων συσκευών HDMI.
• Ο διακόπτης μήτρας HDMI σας επιτρέπει να παρακολουθείτε άλλες συσκευές HDMI σε 2 οθόνες ανεξάρτητα.
• Χρησιμοποιήστε τον ενσωματωμένο υποβιβαστή 1080p σε περίπτωση που 1 ή περισσότερες οθόνες δεν υποστηρίζουν ανάλυση 4K.
• Κατάλληλο για την πιο πρόσφατη ανάλυση Ultra HD 4K60 (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color και χρώματα chroma 4:4:4.
• Υποστηρίζει Dolby Atmos και DTS:X και όλες τις άλλες κοινές μορφές ήχου.
• Με πρόσθετη ψηφιακή έξοδο ήχου για να συνδέσετε επίσης τον δέκτη AV χρησιμοποιώντας ένα μόνο καλώδιο.
• Υποστηρίζει κανάλι επιστροφής ήχου (ARC) για την αποφυγή προβλημάτων συγχρονισμού χειλιών.
• Πραγματοποιεί εναλλαγές αυτόματα ή/και με το τηλεχειριστήριο.

CobraNet (TM) is fully compliant with Ethernet, and is a highly practical solution for distributing audio and control data over a common Ethernet infrastructure. The NHB32-C features four separate 8-channel AES/EBU input/output terminals and uses CobraNet (TM) technology to transfer high-quality 20-/24-bit 48kHz digital audio over four-bundle* paths - in real time.

* One bundle contains 8 channels of 20-bit audio, or 7 channels of 24-bit audio.

MIDI, head amp remote(AD824) and amplifier control

The NHB32-C is designed to handle not only digital audio, but also control data as well. With this function, the unit can be used for one of three types of control*: MIDI, head amp remote (for the AD824 A/D converter) or for monitoring/control of PC-N power amplifiers connected to the ACU16-C.

* Only one control type can be used at a time.

Up to sixty-four channels of audio - with one Ethernet cable

CobraNet handles up to eight bundles of digital audio in multicast (one-to-all) mode on a single CAT-5/100Base-TX cable.Up to eight NHB32-C units can be networked, with each unit transferring four bundles and receiving four bundles, and 64 channels of digital audio can be picked up from any ACU16-C or NHB32-C connected on the network via CobraNet. A networked system with ACU16-C and NHB32-C is able to handle up to 64 channels of digital audio with CobraNet technology. Moreover, multicast and unicast (one-to-one) mode can be used in combination to optimize bandwidth, more than 64 channels of digital audio data can be transferred on a network system.

Line duplication for good reliable system

Primary and Secondary CobraNet (TM) ports are built into the system, providing an easy-to-use duplicate network for reliable operation. If one system fails, the other takes over seamlessly, ensuring absolutely stable performance.

Intelligent Control Panel, Wall-mountable.
The ICP1 intelligent control panel features controls virtually identical to those on the DME64N/DME24N
front panels, giving operators remote control capabilities for both DMEs. It offers unmatched ease of use
thanks to a large, easy-to-read backlit LCD display that shows names for scenes and function keys in 5
languages – Japanese, English, French, German and Spanish. The 6 function keys appearing at the top
and bottom of the LCD screen can be assigned to most parameters for easy remote control access.
These function keys are defined as a "function key set" or "page“. Up to 4 sets of "pages" are available –
for up to 24 parameters assignable to function keys. Users can change the "page" by pressing the
HOME key. A single function key can be used for simultaneous multiple parameter control by defining
parameter links. Function keys are defined with DME Designer software.

Επεξεργαστής matrix mixer processor.

• 8 balanced mic/line inputs (Euroblock) με 48V phantom power.  
• 2 stereo line inputs (RCA). 
• 8 balanced line outputs (Euroblock).
• 16 digital in/out μέσω πρωτοκόλλου YDIF (RJ45) για σύνδεση με ενισχυτές XMV series. 
• 24bit/48kHz/44.1kHz AD/DA converters (44.1kHz
• SD Card Slot για playback αρχείων MP3/WAV.
• Προγραμματισμός «Event Time Scheduler» για αναπαραγωγή αρχείων μουσικής ανακοινώσεων ή συναγερμού.
• 8 GPI in, 4 GPI out, RS232C και Ethernet για έλεγχο. 
• Προγραμματισμός και έλεγχος μέσω  λογισμικού «ΜΤΧ editor» με πληθώρα  «DSP system components» όπως, matrix mixers, equalizers, gates, compressors, auto gain control, feedback suppressor, priority processors, ducker, speaker processor και reverb/echo. 
• Έλεγχος λειτουργίας μέσω ειδικών πάνελ τοίχου «DCP series», ή συστήματα ελέγχου όπως ΑΜΧ ή GRESTRON.
• Διατίθεται και ειδική εφαρμογή για έλεγχο λειτουργίας με συσκευές iPhone, iPod ή Android. 
• Διαστάσεις 480x44x362mm.
• Rack mount 1U.
• Βάρος 4.8 kg.