| Content | Product Description
Dreher & Kauf original Swiss made , Technics EPS 30CS – Diamond Stylus for Turntable
Replacement Aftermarket Stylus: Technics EPS 30CS.
Specs:
Conical Diamond Tip 0.3×0.7 mil
Tracking Force: 1.0 – 1.5grams
Stylus Color: Petrol
Swiss Made
Suitable to replace the following stylus models:
Technics-Panasonic:EPS30CS, P30, EPS510CS, EPS51CS, EPS53CS, P30S, SLBD2, SLDD2, SLDD33, SLJ11, SL-J1, SL-J2, SL-J3, EPCP30S, EPCP30, EPCP33, EPC510, EPCP80RS
SLJ11 SLJ2 SLJ3 SLJ300R SLJ33 SLJS1, SLJS1
SLL1 SLL2 SLL20 SLL3 SLN5
SLQ300 SLQ6 SLQD2 SLQD3 SLQD33 SLQX200
V1X X11 X20 X22 X30 X32R X40 X50 X60, X70 X880 X90 X990D X9D
Z450 Z960 Z990 315 SERIES CDX90
and many more!
|
ORTOFON 530MKII βελόνα
Frequency range 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 530 Mkll, 530, 530 P |
|
Stylus 2M Blue
| Technical data |
| | Frequency range | 20-25.000 Hz | | Frequency response | 20-20.000 Hz + 2 / - 1 dB | | Tracking ability at 315Hz at recommended tracking force *) | 80 µm | | Compliance, dynamic, lateral | 20 µm/mN | | Stylus type | Nude Elliptical | | Stylus tip radius | r/R 8/18 µm | | Equivalent stylus tip mass | 0,5 mg | | Tracking force range | 1,6-2,0 g (16-20 mN) | | Tracking force, recommended | 1,8 g (18 mN) | | Tracking angle | 20° | | Stylus colour | Blue |
| | | Recommended for following cartridges | 2M Blue
| *) Typical value |
Stylus 5E
| Technical data |
| | Frequency range |
20-25.000 Hz
| | Frequency response |
20-25.000 Hz
| | Tracking ability at 315Hz at recommended tracking force *) | | |
| Technical data |
|
| Frequency range |
20-29.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / -0 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
22 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,4-1,7 g (14-17 mN) |
| Tracking force, recommended |
1,5 g (15,0 mN) |
| Tracking angle |
20° |
| Stylus colour |
Bronze |
|
|
| Recommended for following cartridges |
2M Bronze |
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.