| Content |
The Digitech TimeBender Delay Pedal goes beyond normal delays to create custom repeat rhythms or patterns on the fly by simply strumming the guitar. Up to 6 taps can be set to quickly create delays that would normally take a rack of effects and hours of programming.
Digitech Time Bender Delay Pedal features ten delay types including Analog, Digital, Moving Head Tape, Fixed Head Tape, Dynamic (ducking delays), Reverse and Time Warp, the TimeBender goes where no delay has gone before.
Effects available with the VL3D include reverb (studio, room and hall) and a pre-effects section with warmth, compression, de-esser, and noise gate. Additionally, there are controls for Harmony Mix, and an A/B part selector with humanizing mix for dialing in precise gender effects.
Further advancements include full-time tone control, modulation, multiplier, tap tempo and repeat ping-pong patterns on all delay types. For the first time you can get a Fixed Head Tape delay sound with tone rolled off, modulation and set to repeat in triplets. Digitech Time Bender has the ability to add intelligent harmonies to the delays. Choose from over 100 different voicingʼs including octaves, 5ths, 3rds, etc. When the repeats are turned up layers of singing angelic tones are created to form never heard effects.
The Digitech TimeBender Delay Pedal Main Features Include:
- 10 Delay Types: Digital, Analog, Variable Speed Tape, Moving Head Tape, Dynamic (ducking) Digital, Dynamic (ducking) Analogue, Dynamic (ducking) Tape, Time Warp (wide delay time modulation), Reverse, Envelope (chopping delay)
- 20 Second looper
- Unique Strum Tempo lets you create delay "rhythms”
- 100 Intelligent Harmonies on delays creating new delay tones
- Full-time tone control on delay
- Tap Tempo
- 4 Memory settings
- BPM or Millisecond delay read out
|
- Πετάλ κιθάρας vintage tube overdrive
- Λειτουργεί με μπαταρία 9V ή με εξωτερικό τροφοδοτικό PSU-SB DC (η μπαταρία και το εξωτερικό τροφοδοτικό δεν περιλαμβάνονται)
- 1 Χρόνος Εγγύηση
- Get vintage overdrive, smooth sustain and screaming fat tone
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included)
- First-class electronic On/Off switch for noise-free operation
- 3-Year Warranty Program*
- Designed and engineered in Germany
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
Το κλασικό Wah-Wah πετάλι της VOX με παραδοσιακό ήχο & εμφάνιση της δεκαετίας του '60.
The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications - Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
|
- Experience true analog delay and vintage slap-back echo that rivals any tape delay
- This BEHRINGER product has been designed to compete head to head with leading products on the market
- Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
- Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
- Blue status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- First-class electronic On/Off switch for highest signal integrity in bypass mode
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Analog at its Finest
Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command.
Easy to Operate
The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included).
Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay...
|
Πεταλιέρα με 10 εφέ Delay κορυφαίας ποιότητας από την EVENTIDE. Digital delay, Vintage DDL, Tape Echo, Modulation Delay,Ducked Delay, Band Delay, Filter Pong, Multitap Delay, Reverse delay, Looper 12 δευτερόλεπτα. 27 μνήμες,Tap Tempo και MIDI Clock Sync.
SPECIFICATIONS:
| Analog Input/Output |
|---|
| Input impedance | 500K ohms | | Output Impedance | 470 ohms | | Recommended Load Impedance | 10K ohms or greater |
| Connectors | | Input 1 (mono) | ¼ inch mono phone jack | | Input 2 | ¼ inch mono phone jack | | Output 1 (mono) | ¼ inch mono phone jack | | Output 2 | ¼ inch mono phone jack | | Expression Pedal | ¼ inch mono phone jack | | Aux Switch | ¼ inch stereo phone jack | | USB | Type B Socket. Use 2.0 cables only. | | MIDI In | Five pin DIN (Female) | | MIDI Out/Thru | Five pin DIN (Female) | | AC Adapter Jack | Power Supply included (see below) |
| Physical | | Power | 9 VDC, 1200 mA, Tip hot (+) | | Dimensions | English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm | | Weight | 2.15 lbs, 1kG |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.