Content | Το D&R Hybrid-1 είναι ένα αναλογικό τηλεφωνικό υβρίδιο, με δυνατότητα ελέγχου τοπικά. Δεν απαιτεί εξωτερική τροφοδοσία ρεύματος καθώς τροφοδοτείται από την τηλεφωνική γραμμή.
- είσοδος και έξοδος ήχου(jack 6,3 χιλ.)
-Υποδοχή 2 καλωδίων με παράλληλη έξοδο για σύνδεση εξωτερικής τηλεφωνικής συσκευής.
-Τοπικός έλεγχος των λειτουργιών αποδοχής-απόρριψης γραμμής και ειδοποίηση εισερχόμενης κλήσης.
-Αυτόματη αντιστάθμιση επιπέδου γραμμής
-Έλεγχος στάθμης σήματος αποστολής/λήψης στο εμπρόσθιο τμήμα
-Τροφοδοτούμενο από την τηλεφωνική γραμμή
-Εσωτερικό buzzer on/off
- 1U Πλαίσιο 1/2
D&R's newest Telephone Hybrid-1 is an interface between a standard telephone line and a mixing console. Its purpose is to enable to record or broadcast a conversation between a caller and a presenter in an easy way.
Superb audio separation between in and outgoing signals are achieved by carefully designed internal circuitry. It is a problem solver for changing two wire communication into a four wire system with separate in and outputs.
Telephone hybrids provide the interface between professional audio equipment and the public telephone network.
They provide protection for your equipment and the public telephone lines, allowing for varying line signals and line conditions. Automatically canceling out the unwanted signal they also facilitate two-way communication down a single telephone line.
Each hybrid has a telephone line connection, a handset connection and separate connectors for audio input and output from a broadcast mixer, or other professional audio source.
A large proportion of D&R hybrids are used in radio and television broadcasting applications allowing external callers to be connected to the studio mixing console. Most of the other units are supplied to communication operations allowing extremely effective conversion between 4-wire audio circuits and standard telephone lines.
Specification
Output: balanced mic level -20dB. Input: Line level 0 dBu balanced. R/C balance: fully adjustable separation to more than 30dB.
C-BALANCE :12 pole rotary switch to select the optimum side tone attenuation.
R-BALANCE: Internal potentiometer to adjust for optimum side tone attenuation.
TO CALLER: Switch to temporarily connect the line (wall) connector to the Phone connector (appliance) to be able to dial and make a connection.
ON-LINE CONNECT: Line connect switch to connect and disconnect calls from the telephone line |
Innovation
The ARX AFTERBURNER? is a unique Multi Mode compressor/limiter designed for use in any professional audio dynamics control application. Multiple Modes The Afterburner can be set up and used in three different ways: In Two channel mode, it performs as two independent compressor/limiters, with 'industry standard' variable Threshold, Ratio and Output gain. In stereo mode, our New Adaptive Stereo Link circuitry provides increased stereo imaging accuracy when linking both channels as a stereo pair. A single front panel switch puts the Afterburner into its alternative Mono mode, setting it up as a Single channel, Dual Band compressor/limiter, with separate dynamics control of both Low and High frequencies, opening up a whole new range of gain control techniques. Enhance Switch In any mode, the Afterburner features an 'Enhance' switch, which provides frequency restoration to preserve the spectral balance of the audio signal, compensating for the sagging Low and High frequency response of compressed program material. Think of it as a 'smart' loudness control. Features Switchable Modes - Stereo; Dual Channel Single band; or Single Channel Dual Band (Low and High) Low and High frequency compression in Single Channel mode 'Enhance' switch restores spectral balance of compressed signal New Hard/Soft knee compression switch New Adaptive Stereo Link circuit for accurate stereo imaging New Above/Below Threshold LEDs enable at-a-glance compression confirmation Balanced XLR and Jack Inputs and Outputs Sidechain Insert points Intuitive user-friendly layout Flawless performance New Above/Below Threshold LEDs enable at-a-glance compression confirmation New Hard or Soft knee compression option New LED metering provides accurate Level status, with separate Gain Reduction metering in easy to read 'wide scale' meters. There is also comprehensive LED indication of all operating functions and status in any mode. Balanced Inputs and Outputs On the rear panel, each channel has true differential Balanced inputs and outputs, on both XLR and TRS jack connectors. As well, each channel has a TRS jack Sidechain access insert point, for applications such as De-essing (when used with an external equalizer such as the ARX Multi Q or EQ 260).Other features include a true Hardwire bypass switch for each channel, and passive RFI filters on the inputs. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. With its smooth compression, intuitive user friendly layout, high density precision circuitry, and extensive user-variable operating parameters, the unique ARX Afterburner is equally at home in Studio, Installation, Broadcast and Sound Reinforcement environments. It can provide great sounding dynamics control effects that are not available with any other device. T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 22 dB CMRR >60 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 22 dB Frequency Response 20Hz to 20KHz ±0.2dB Signal to Noise ratio -93 dB Unweighted, -99 dB 'A' weighted Distortion .02% THD @ 0dB,1KHz Dynamic Range 115 dB Sidechain Insert Impedance 10 Kohm Filter Section Filter Type Phase corrected 6dB/octave Summed Filter Response ±0.2dB through crossover region Dividing Frequency 250 Hz Enhance Section Low Enhance 50 Hz, High Enhance 10 KHz Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input/OutputConnector type XLR, Balanced Jack Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls Above/Below Threshold LEDs 12 segment LED Output Level display Numbered marker panel for labelling compressor assigns 7 segment LED Gain Reduction display Enhance switch and status LED Adaptive Stereo link switch and status LED Dual/Single channel mode switch and status LEDs Rear Panel Connectors Balanced Inputs and Outputs, on both XLR and TRS jack connectors. In Single channel (Mono) mode, use Channel 1 Inputs and Outputs only Sidechain Insert TRS connector on each channel AC input connector, with voltage switch and fuse. |
VIRTUALIZER 3D FX2000 - Υψηλής απόδοσης 3D Multi-Engine Επεξεργαστής εφέ.
• 71 breathtaking new algorithms—true RSM (Real Sound Modeling) stereo and 3D effects
• Wave-adaptive virtual Room reverb algorithms for natural reverb and delay
• Awesome modulation, dynamic, psychoacoustic and EQ algorithms
• Authentic amp simulation, distortion and special effects
• 11 effect combinations with selectable serial / parallel configuration
• Up to 7 adjustable parameters plus 2-band EQ per effect
• 24-bit A/D and D/A converters with 64/128-times oversampling
• True stereo processing for realistic channel separation in stereo image
• 100 factory presets plus 100 user memory locations
• Extensive MIDI implementation
• Accurate LED level meters for perfect level setting and optimum performance
• Servo-balanced XLR and ¼'' TRS inputs and outputs
The FX2000 allows you to layer modulation effects like chorus, flanger, pitch or tremolo with your reverb or delay selections.
The FX2000 provides 12 different reverb programs, so you always have the ideal reverb for your live performance or studio needs.
• Reverbs: Cathedral - Gold plate - Small hall - Studio - Concert - Stage - Spring & Reverse Reverb - Ambience and more...
• Delays: Stereo - Tape Echo - Ping Pong and more...
• Modulation and Pitch Shifter FX: Stereo/Vintage/Jet Stream Flanger - Stereo/Analog/Vintage/Ultra/ Chorus - Stereo/Vintage/Dual Phaser - Rotary - Pitch Shifter - Vibrato and more...
• Dynamic FX: Compressor – Expander – Gated Reverb – An. Compr/Lim. — Ultramizer – Denoiser – De-Esser and more...
• Psychoacoustic FX: Exciter – Enhancer – Stereo Imager and more...
• Filter/EQ FX: Auto/LFO Filter – Parametric/Graphic EQ.
• The FX2000 is also equipped with distortion, amplifier and speaker simulation including Vocal/Tube distortion, Guitar Amp and more...
• Special FX:Vinylizer - Sampler - Vocoder - Voice Canceler - Resonator.
|
The AD2055 combines 100% discrete, pure class A signal amplifiers with state-of-
the-art passive and active filter topologies. The AD2055's unique circuitry delivers
very high resolution transient detail at the operational extremes of real world equalization
demands. The AD2055 auto-bias DC servo loop control eliminates the need for all
interstage capacitor coupling. The AD2055 breathes life into all musical performances!
AD2055 FEATURES
Pure Class A, 100% discrete design
Smooth musical detail and sonic excellence
Minimum audio signal path
Dual mono operation
Transparent active and passive filter design
High headroom +30dB Very low noise -94dB
Fully balanced inputs and outputs
DC coupled, no transformers in audio path
Switched frequencies in high and low bands
Mid bands use X10 frequency for extended range
Wide bandwidth -3dB 1Hz to 450kHz
Low distortion less than 0.5% THD and IMD
All signal routing with sealed silver relays Conductive
plastic potentiometers for low noise
External 150W toroidal power supply 100% discrete
power supplies for audio path
Long lasting, stainless steel hardware
SONIC EXCELLENCE
The Avalon AD2055 Pure Class A music equalizer is the most powerful, low noise
parametric equalizer available today. Designed to optimize absolute signal integrity
and musical performance, the AD2055 combines the best of active and passive filter
topologies with sonic excellence unequaled by lesser designs. The AD2055 is the
perfect solution for two buss music-program equalization, special instrument EQ and
FX applications and ultra high performance mastering studio's.
Features include state-of-the-art, balanced 100% discrete, Pure Class A signal amplifiers,
practical user features and rugged hardware designed to deliver true high performance
audio for many years.
PASSIVE-ACTIVE FILTER DESIGN
Avalon equalizers feature the unique combination of both active and passive filter EQ designs.
This special combination enables the AD2055 to deliver high speed transient detail at the
operational extremes of real-world equalization demands. The passive high and low bands offer
alternate musical tone range to the full function active parametric mid bands. Passive equalizers
have long been a favorite with music lovers around the world. Full bodied, powerful (up to +/-32dB,
64dB range !) and sweet frequency selections are the benefits of the passive high-low EQ bands.
The full bandwidth twin mid bands provide variable frequency selection (X10 frequency multipliers
for very wide range), variable Q (width) and amplitude control.
MINIMUM SIGNAL PATH DESIGN
Avalon's advanced true symmetry design offers high-voltage, large headroom, extended bandwidth
and very low noise. The use of 100% discrete, Pure Class A signal amplifiers give the serious music
professional unlimited sonic character and a natural harmonic detail that enhances the program
material and becomes one with the music itself. The Avalon AD2055 breathes life!
AD2055 SPECIFICATIONS
Circuit Topology High-voltage 100% discrete, balanced and symmetrical
Class A
Output Gain Range Unity Gain
Maximum Input Level +30dB balanced XLR pin 2 hot
Maximum Output Level +32dB balanced 600 ohms, DC coupled, high-current
discrete Class A
Input / Output Type XLR type, pin 2 hot balanced
Noise 20kHz Unweighted -94dB (EQ in)
Distortion THD, IMD 0.5% (typical 0.05% at +6dB 1kHz)
Frequency Response -3dB 1Hz to 450kHz (input band limited)
Equalizer Type Passive high and low bands plus two fully parametric mid
bands
Bypass Hard-wire relay bypass for equalizer in-out
Low Band F1 Passive, amplitude to -32dB to +32dB shelf or peak-dip curve
F1 Frequency Range Switched 10 position 18Hz, 25, 30, 50, 72, 100, 150, 215,
300, 450Hz
Mid Band F2 Active, amplitude to -16dB to +16dB peak-dip curve
F2 Frequency Range Variable 35Hz to 450Hz (x10) 350Hz to 4k5Hz, Q (width)
0.3 to 3.0
Mid Band F3 Active, amplitude to -16dB to +16dB peak-dip curve
F3 Frequency Range Variable 160Hz to 2k0Hz (x10) 1k6Hz to 20kHz, Q (width)
0.3 to 3.0
High Band F4 Passive, amplitude to -26dB to +26dB shelf or peak-dip curve
F4 Frequency Range Switched 10 position 1k5Hz, 2k5, 3k5, 5k, 7k2, 10k, 12k5,
15k, 20k, 25kHz
AC-DC Power External AC supply, 150w toroidal transformer, 4 pin cable 90v
isolated,
(B2T Power Supply Included) 100-240v selectable 50/60Hz, 150w max
Dimensions 19 x 3.5 x 12 in (482 x 88 x 305mm)
Shipping weight 30lbs (13.6 kg)
|
Σχόλια: Αναλογικό τηλεφωνικό υβρίδιο 2 τηλεφωνικών γραμμών, σχεδιασμένο για να ικανοποιεί τις απαιτήσεις των τηλεοπτικών και τα ραδιοφωνικών σταθμών. Βalanced είσοδοι και έξοδοι ήχου με υποδοχές XLR, έλεγχος στάθμης στο εμπρόσθιο τμήμα της συσκευής. Απομακρυσμένος έλεγχος αποδοχής-απόρριψης γραμμής, ενεργοποίησης-απενεργοποίησης τηλεφωνικής συνδιάσκεψης, ειδοποίησης εισερχόμενης κλήσης. Ενδεικτικό LED εμφάνισης των επιπέδων σήματος λήψης, αποστολής ή συνδιάσκεψης. Αυτόματη αντιστάθμιση ποιότητας γραμμής. Παρέχει δυνατότητα επέκτασης του συστήματος χρησιμοποιώντας επιπλέον συσκευές Μacrotel και επιτρέποντας τον έλεγχο δύο τηλεφωνικών γραμμών από μία είσοδο της κονσόλας.
GENERAL DATA
Power Supply 220 / 110V 25 VA
Dimension 434x351x44mm (1 rack unit)
Weight » 4 Kg
MEETING INTERFACE IN / OUT
Connector DB 9 female
Nominal in / out audio level 0 dBm
Input impedance 600 W / 10 KW (selectable)
Output impedance 100 W
* nominal line level: - 6 dBm
** it can vary depending on characteristics of telephone line
All measurements are intended at 1 kHz.
AUDIO PROGRAM IN / OUT
Connectors XLR, electr. balanced
Input impedance 600 W / 10K W (selectable)
Output level * - ¥ ¸ + 16 dBm
Output impedance 100 W
Noise on Receive output
2-Wire separation £ 25 dB**
4-Wire separation £ 70 dB
2-WIRE SECTION
Connector RJ11
Nominal input level - 6 dBm
Nominal output level - 6 dBm
Compensation mode Electronic, transf. decoupled
Impedance 600 W
4-WIRE SECTION
Connector Terminal block
Impedance 600 W
Nominal TX level 0 dBm
Nominal RX level 0 dBm
|
Features Four Independent Compressor Channels Channels 1 and 2, 3 and 4 are stereo linkable 7 LED Gain Reduction metering Balanced XLR Inputs and Outputs Sidechain Insert points Intuitive, user friendly layout Flawless performance The sheer amount of effects and signal processors necessary for today's standards of audio production puts a great strain on the available space in equipment racks, both in the studio and on the road.So, ARX would like to introduce the ARX Quadcomp. An all-new upgrade of the classic award-winning ARX Quadcomp?, the very first four channel 1 RU compressor.You?ll notice that we haven?t strayed very far from our original design concept. The Quadcomp is still four variable ratio Compressor/ Limiters neatly housed in a compact all steel 1 RU package. However, all new low noise/low distortion circuitry, better metering plus XLR inputs and outputs put the Quadcomp in a class of its own. More Control, Less Space On the front panel, each channel has the 'industry standard' individual controls for Threshold, Compression Ratio and Output, plus a new 7 LED Gain Reduction display for accurate visual indication of the amount of gain reduction being applied to the program, and an IN/OUT hardwire bypass switch.In addition to this, each channel has a blank numbered panel to write on for easy confirmation of compressor assigns. Precision Circuitry Internally, each compressor uses Class A VCAs and true 2 pole averaging RMS/DC converters for low distortion and accuracy, plus program dependent attack and release time, which automatically determines optimum compressor response. Balanced Inputs and Outputs The rear panel has true differential Balanced XLR Inputs and Outputs for each compressor. Each compressor has a TRS jack Sidechain access insert point, for frequency sensitive compression, De-essing, etc. in conjunction with an external equalizer (such as the ARX EQ260). Compressor pairs 1 and 2, 3 and 4 also have rear panel mounted Stereo Link switches for accurate stereo tracking. When switched IN, the first channel becomes the master and controls all the functions of the second except Output gain. Universal AC Power AC power range is switchable 100 to 120V, or 220 to 240V, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage switch. Whatever the application ? Channel insert, Bus insert, Master Outputs, Monitor outputs, Crossover outputs, the Quadcomp II?s unique High Density design, precision Low Noise circuitry and clean uncluttered layout make it a truly useful audio tool for all applications.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 20dB CMRR >50dB, 20 Hz?20 KHz Output Impedance Balanced 300 ohms Unbalanced 150 ohms Output Level (Max) + 20 dB Frequency Response 20Hz-20KHz ±0.5dB Signal to Noise ratio -93 dB Unweighted, -98 dB ?A? weighted Distortion .015% THD @ 0dB,1KHz Dynamic Range 108 dB Attack and Release Times Program dependent Metering 7 LED display: ?1, 2, 3, 6, 12, 18, ?24 dB Sidechain Insert Impedance 10 Kohm Power Requirements 100/120 V AC or 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input Connector type Balanced XLR Output Connector type Balanced XLR Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls 7 LED Gain Reduction display Marker panel for labelling compressor assigns Stereo link status LEDs Rear Panel Connectors Input and Output balanced XLR connectors TipRingSleeve Sidechain insert connectors Channels 1 and 2, 3 and 4 Stereo link switches IEC AC mains connector with inbuilt fuse and voltage change |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.