D&R WEBSTATION ON AIR Production Mixer ΚΟΝΣΟΛΑ ΡΑΔΙΟΦΩΝΙΚΗΣ ΠΑΡΑΓΩΓΗΣ 2Mic with 48V, 6ch Line RCa, 1 VOIP TELEPHONE, 1 USB 3x I/O,

With the Webstation you can now own a modern broadcast mixer for a very attractive price. This new and handbuilt piece of precision equipment is built around proven low noise circuitry. It is an intelligent mixer with an internal USB control section that comfortably enhances daily use and even has a built in silence detector. It is a reliable workhorse for the self-op production D.J. There is a built in Telephone VOIP functionality, 3 in/out channels of stereo USB and 2 very low noise Mic inputs. The WEBSTATION is ideal for ON-AIR, Production work and perfect for streaming to the web.
The WEBSTATION accepts and instantly controls a maximum of 3 in/out stereo channels from your Play-out software. It is built into a heavy duty metal RF shielded chassis. Easily "drops” into your furniture to give that exciting radio look. Built with a strong powder coated front panel for durability and it is the result of more than 47 years of experience at D&R.

MIC, LINE, USB and Internal VoIP
The WEBSTATION mixer has 2 balanced, phantom powered mic inputs with inserts for voice processors. Six stereo line inputs, 3x USB channels and 1x Telephone VOIP channel.
If you want to connect an analog phone line a Cleanfeed output is provided for to connect to an external Hybrid.
Only one physical USB connection is the interface to transfer 3 stereo audio channels + VoIP signal from and to your PC plus all control data from the control section and the software meter application.
The VOIP Channel 6 is also routed to the main USB connector. Talk back to the VOIP channel is by pushing both "Mic CUE" and "VOIP CUE" to make conversation with callers very easy prior to broadcasting.
The Webstation has a very musical 2 band equalizer. High quality low noise mic inputs with built in low cut filters.

Straight Forward Master Section
The WEBSTATION’s modules can be easily tailored
to your own needs with the included software program page shown below.
All 6 modules have their own page, where you can program Cue reset enabled by Line, Mic, Fader, On etc.
The Mic On busses (for your ON-AIR light) can be enabled by Line or Mic or USB.
A great feature is the ability to program your own switch colours, activate the CRM mute module and program the Studio Remote. Additionally if you want your Phantom power on or off individually programmable per channel this can also easily done.
All settings can be stored(write) and loaded (read), see the configuration manager below.

Specs
- Six dual inputs
- 2 band EQUALIZER
- Windows / Mac compatible
- Built in auto Silence detector
- 3 USB stereo in /out channels
- Mic inputs with 48 volt Phantom
- Play out USB control section included
- CRM and Phone outputs
- Built in VOIP functionality
- Internal NON STOP switching
- Cleanfeed output for external Hybrids
- Bi directional Cue communication buss
- Incoming phone calls visible on screen
- Ideal for Production, Voice tracking and On-AIR

Summary
The uncluttered and clearly understandable features make it the ideal tool for making radio programs. The Webstation is compact, reliable and ideal for production rooms. It can be used as your main stations On-Air mixer or used as your home Internet Radio station. We hope to have given you an idea of the huge potential of this new WEBSTATION broadcast mixer. If you need more info than presented here on our web page you can download the manual for even more in depth info.

INPUTS
Mic input: bal, 2 kOhm, XLR ,48 volt Phantom.
Noise: - 128 dBr (A-weighted).
Sensitivity: - 70dB min, OdB Max.
Insert: unbalanced 10kOhm -10dBv.
Line inputs: unbal., 10kOhm, Cinch.
Gain: range of 40dB.
USB: 3x Stereo in and 3x stereo out.

USB
Fully compliant with USB 2.0 playback and record mode.
3x Stereo in and 3x stereo out.

USB CONTROL SECTION
12 free assignable illuminated switches based on the HID protocol.

VoIP CHANNEL
Uses USB processing for VoIP.

OVERALL
Frequency response: 10 - 60.000Hz.
Distortion: < 0.01% max at 1 kHz.
GPO/Mic On: Opto FETS. (24volt/50mA max).
Led bars: Software meter application.

OUTPUTS
Left/Right: 0 dBu unbal. on Cinch.
CRM: 32-400 Ohm, Jack.
Headphone: Program/Voice track/VoIP
USB out: 0 dBu unbal. on Cinch.

EQUALIZER
High: + / -12 dB at 12kHz shelving.
Low: + / -12 dB at 60 Hz shelving.

CONTROL SOFTWARE
A software program is included in the delivery for programming the Control section (Webstation Virtual Keyboard Mapper) and internal mixer settings.

DIMENSIONS
Left-Right: 350 mm
Front-Back: 315 mm
Height: 30 to 90 mm
Front panel thickness: 2 mm
Radius Corners: 20 mm
Weight: 8kg.
Drop through hole: 320 x 295 mm
EAN code: 7436917138155

The Lyra-8 is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.

The core of the Lyra is a sophisticated DSP engine. This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.

Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer. No fundamental concessions have been made towards reliability, high speed controller-response and system stability.

Apart from that there is the unique capability to control Lyra's functions over the Internet 

• The Lyra is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.
• The core of the Lyra is a sophisticated DSP engine.
• This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.
• Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer.
• No fundamental concessions have been made towards reliability, high speed controller-response and system stability.
• Apart from that there is the unique capability to control Lyra's functions over the Internet 
• Over 18 inputs (7x digital, 7x analog, 4x mic inputs) are connected to a digital cross-point router to accept various formats of audio.
• This router actually is an integrated programmable patch-bay allowing you to send any of the input signals to any desired processing channels of the DSP’s.
• These processing channels consist out of a three band parametric Eq-section and dynamics control application.
• The signal output by the DSP channel can be routed to main stereo busses.
• Every main buss is stereo and has dedicated analog outputs, but the bus signals can also be routed to a digital output as well.
• Monitoring functions are analog making interfacing with the outside world very simple and easy to understand.
• The Lyra has four processing channels with 100m faders with large illuminated On and Cue switches an a rotary encoder for multiple functions.
• A LCD per channel shows input selections and many other functions.
• In the right hand section of the console are dedicated instant access functions for Source selection, Gain, EQ on/off, Dynamics on/off, Aux, Pan, Program and Sub selection.
• The analog master section with 16 segment led bars and source select switches makes interfacing very easy with all sorts of  monitoring devices.
• A CobraNet option is available for integration within our network solution to share more sources.
• An Ethernet connector is available for remote control via TCP/IP protocol.

D&R Airmate-USB

Extremely popular low budget Radio-On Air console. Thousands of happy users.

• 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
• 48V Phantom power
• 12 Stereo line inputs
• 2x USB and 2x telephone hybrid (RJ45)
• Fader start
• Aux pre or post
• Design: 19“, 8U
• Weight: 11 kg
• OPTIONAL: Digital AES/EBU output
  
  Version with Digital out:
  https://www.artsound.gr/catalog/airmate-broadcast-mixer-6mic-12st-input-4inst-2usb-2hybrids-1dig-p-40076.html?osCsid=sik7imkgvqtfj5acb59qk5krh5
  

Faderstarts and Cleanfeeds are standard

We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer.
Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and
USB connection to the PC (e.q. for streaming to the web).
A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type.
Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors.
Every Mic input has an insert for signal processors.
And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

Built in Telephone Hybrids
This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids.
Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC.
Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach.
High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy.
With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.

But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure.
The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers.
A clean feed send is available for external analog and digital Hybrids.
 
Built in VoIP or Telco channels
We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module.
Please tell your dealer the combination you want.

VoIP | ISDN | GSM
If you would like to call with VOIP we can supply a pcb with all the VoIp
options on it that replaces the existing Telco module(s) for landlines.
You can do that for one or both Telco modules, whatever your choice is.

If you do not want a permanent VoIP solution you can use the
CISCO SPA112 as an interface between our 2 Telephone modules
and the Internet. And in case you have an ISDN connection in
your situation, we advice to use the Fritz Box type 7390 to
convert the ISDN into an analog line that can be connected directly
to the Telco modules of the Airmate-usb  mixer. If you want to
connect the Airmate-USB to the GSM network just buy from a
third party this Musitel unit connect it to the Phone RJ11 socket
and you're set.
 
Now is the time to install your own production room
The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Self­op switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.
 
The focal point in a production studio
The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s compre­hensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs.
Small, reliable and 19" rack mounting ideal for production rooms.
It can also double as an On-Air mixer or implemented in your own Internet Radio station.
If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.

Extremely popular low budget Radio-On Air console. Thousands of happy users.

• 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
• 48V Phantom power
• 12 Stereo line inputs
• 2x USB and 2x telephone hybrid (RJ45)
• Fader start
• Aux pre or post
• Design: 19“, 8U
• Weight: 11 kg

Faderstarts and Cleanfeeds are standard

We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer.
Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and
USB connection to the PC (e.q. for streaming to the web).
A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type.
Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors.
Every Mic input has an insert for signal processors.
And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

Built in Telephone Hybrids
This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids.
Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC.
Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach.
High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy.
With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.

But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure.
The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers.
A clean feed send is available for external analog and digital Hybrids.
 
Built in VoIP or Telco channels
We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module.
Please tell your dealer the combination you want.

VoIP | ISDN | GSM
If you would like to call with VOIP we can supply a pcb with all the VoIp
options on it that replaces the existing Telco module(s) for landlines.
You can do that for one or both Telco modules, whatever your choice is.

If you do not want a permanent VoIP solution you can use the
CISCO SPA112 as an interface between our 2 Telephone modules
and the Internet. And in case you have an ISDN connection in
your situation, we advice to use the Fritz Box type 7390 to
convert the ISDN into an analog line that can be connected directly
to the Telco modules of the Airmate-usb  mixer. If you want to
connect the Airmate-USB to the GSM network just buy from a
third party this Musitel unit connect it to the Phone RJ11 socket
and you're set.
 
Now is the time to install your own production room
The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Self­op switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.
 
The focal point in a production studio
The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s compre­hensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs.
Small, reliable and 19" rack mounting ideal for production rooms.
It can also double as an On-Air mixer or implemented in your own Internet Radio station.
If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.

• Can be operated directly as a standalone or in conjunction with D & R Airmate / Airance / Axum
• Cable and mounting holes on the back
• 12 Volt / 450 mAh
• Dimensions (W x H x D): 260 x125 x 65 mm
• Incl. power supply

D&R Studio sign On Air light  Mono Face, A perfect matching ON-AIR lamp for all our mixers. You can of course use the unit too for other brands.

We can supply you a perfect matching ON-AIR lamp for all our mixers.

You can of course use the unit too for other brands.
We call it ON-AIR Lamp but actually there is no lamp inside anymore, just everlasting high intensity red leds.
The unit is powered by a 12 volt DC 1A external power supply.
And what's more... no hassle with how do I connect this thing to my AIRMATE-USB/AIRENCE-USB/AIRLAB or AXUM.
No complicated high voltage AC switching with external relays etc. etc.
What you only need is one stereo cable (wired tip/ring) coming from the MIC-ON connector on the back of the AIRMATE/AIRENCE/AIRLAB console that goes directly hardwired to a terminal strip inside the ON-AIR LAMP. How easy is this for a change.
The power adapter will also be directly wired to the terminal strip inside the unit.

Width: 260mm

Height: 125mm

Depth: 65mm