Content | Χαρακτηριστικά
Product type
Loudspeaker Chassis
Overall diameter
256.29 mm
Pitch Circle Diameter
245.4 mm
Cut- out Measurement
233.17 mm
Diameter of fixing holes
6.35 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
99.6 dB
Frequency response
300 - 4000 Hz
Voice Coil Material
Aluminium
Depth of the magnetic gap
7.95 mm
Fs (Resonance Frequency)
326.38 Hz
Re (DC resistance)
5.68 Ohm(s)
Qms (mechanical quality)
7.14
Le (inductance of the voice coil)
0.48 mH
Qes (electrical quality)
2.27
Qts (overall quality)
1.73
Vas (equivalent volume)
1.7
Mms (moving mass)
17.62 g
BL (power factor)
9.5 T/m
Xmax (maximum displacement)
1.5 mm
Cms (elasticity of the suspension)
0.01 mm/N
Sd (membrane area)
350.1 cm²
|
Μεγάφωνο woofer νεοδυμίου 10ʼʼ, 300W, 96dΒ, 2.9kg
600 W continuous program power capacity |
|
64 mm (2.5 in) copper voice coil |
|
50 – 2500 Hz response |
|
96 dB sensitivity |
|
Neodymium magnet allows a very light yet powerful motor assembly |
|
Shorting copper cap for extended HF response |
|
Ventilated voice coil gap for reduced power compression |
| |
Nominal Diameter 250 mm (10 in)
Overall Diameter 256.8 mm (10.1 in)
Bolt Circle Diameter 243.8 mm (9.60 in)
Baffle Cutout Diameter 233.8 mm (9.20 in)
Depth 102 mm (4.02 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 2.25 Kg (4.96 lb)
Shipping Box
(Single Carton Box) 140x280x282 mm (5.51x11.02x11.10 in)
Shipping Weight 2.6 Kg (5.73 lb)
Nominal Impedance 8 Ohm
Minimum Impedance 6.8 Ohm
Nominal Power Handling *** 150 W
Maximum Power Handling **** 300 W
Sensitivity (1W/1m) 96 dB
Frequency Range 50÷4500 Hz
Voice Coil Diameter 37 mm (1.46 in)
Winding Material Al
Former Material Kapton
Winding Depth 12 mm (0.47 in)
Magnetic Gap Depth 8 mm (0.31 in)
Flux Density 1 T
Fs 55 Hz
Re 5.9 Ohm
Qes 0.7
Qms 9
Qts 0.6
Vas 44 dm^3 (1.55 ft^3)
Sd 327.7 cm^2 (50.79 in^2)
Xmax * 4.67 mm
Xdamage ** 10.4 mm
Mms 22.5 g
Bl 8.2 N/A
Le 0.42 mH
Mmd 20 g
Cms 0.3 mm/N
Rms 0.9 Kg/s
Eta Zero 1.4 %
EBP 79 Hz
|
- 2,5'' voice coil fiberglass former and aluminium winding
- Progressive wave Konex spider
- Cloth surround with DAR technology
- Cone waterproof treatment
- Ventilated voice coil to reduce power compression
- BMF ferrite magnet
- 96.1 dB sensitivity
|
Nominal Specifications
Nominal Diameter 10“, 250 mm
Overall Diameter 10.28“, 261 mm
Bolt Circle Diameter 9.69“, 246 mm
Baffle Cutout Diameter 9.06“, 230 mm
Depth 5.56“, 141.3 mm
Flange and Gasket Thickness 0.49“, 12.5 mm
Electrical Specifications
Minimum Impedance 7.3 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 700 W
Maximum Power Handling**** 1,400 W
Sensitivity (1W/1m) 96 dB
Frequency Range 60 - 4000 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Aluminium
Former Material Glass Fiber
Winding Depth 0.87“, 22 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.3 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 60 Hz
DC Resistance (Re) 5.5 Ohm
BL Product (BL) 25.7 N/A
Diaphragm Mass inc. Airload (Mms) 72.5 grams
Mechanical Compliance of Suspension (Cms) 0.096 mm/N
Rms 4.58 Kg/s
Electromagnetic Q (Qes) 0.22
Mechanical Q (Qms) 6.01
Total Q (Qts) 0.23
Compliance Equivalent Volume (Vas) 0.55 ft³, 15.65 dm³
Surface Area of Cone (Sd) 52.5“², 339 cm²
Maximum Linear Excursion (Xmax)* 9 mm
Xdamage** 12.5 mm
Coil Inductance (Le) 0.85 mH
Diaphragm mass (Mmd) 69 g
Eta Zero 1.46 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.