| Content | TONAR 757DS EPS 270 S High quality stylus
Technics EPS 270 C – Βελόνα για Πικάπ.
Fits the following models: Technics-Panasonic-National: EPS 52 STDD, EPS 52, EPS 53, EPS 56, EPS 270 C, EPS 270 SD, EPS 270ED, EPS 271 C, EPS 290, EPS 440QD.
Technics - Panasonic EPS-270 Turntable Needle
Quality aftermarket spare turntable needle for the Technics - Panasonic EPS-270 series.
Specs:
- Conical Diamond Tip 0.3×0.7 mil
- Tracking Force: 1.5 – 2.5grams
- Stylus Color: Green
- Made in Holland
Technics-Panasonic Cartridges: EPC-270C, EPC-270SD, EPC-271C, EPC-290, EPC-290C, EPC-441C, EPC-56, EPC-79, EPC-86, EPC-87, EPC-96, EPC -270CII.
Also fits:
Aiwa: AN 6
Blaupunkt: EM-240
Fisher: ICS-709
Nagaoka: N-321 B, NM-321
Tectron: N-712
Toshiba: N-320, N-330 | Bελόνα Πικάπ για την κεφαλή της Numark CS-1. | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Stylus 3E
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz + 2 / - 3 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,5-2,0 g (15-20 mN) |
| Tracking force, recommended |
1,75 g (17,5 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value
|
ORTOFON 540MKII Ανταλλακτική βελόνα
Frequency range 20-27.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 90 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude FG 70
Stylus tip radius r/R 5/70 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 540 Mkll, 540, 540 P |
|
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.