INTER-M L-2400 AMPLIFIER 2X750W
€1,198.00 με ΦΠΑ 24%
Διαθέσιμο κατόπιν παραγγελίας
EAN: N/AΒάρος | 15.60 kg |
---|
Quick Comparison
INTER-M L-2400 AMPLIFIER 2X750W remove | BITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER remove | CROWN XTi-2002 2x800W@4Ω ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ remove | LD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm remove | CROWN XLS-2000 Tελικός ενισχυτής 2x1050W/2Ω-2x650W/4Ω-2x375W/8Ω remove | RAM AUDIO S-1500 Ενισχυτής Ισχύος 2x880 Watts remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | INTER-M L-2400 AMPLIFIER 2X750W remove | BITTNER AUDIO XR2000-2X100W/4Ω POWER AMPLIFIER remove | CROWN XTi-2002 2x800W@4Ω ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ remove | LD Systems LDSP1K8 Professional Power Amplifier 2 x 880 W 2 Ohm remove | CROWN XLS-2000 Tελικός ενισχυτής 2x1050W/2Ω-2x650W/4Ω-2x375W/8Ω remove | RAM AUDIO S-1500 Ενισχυτής Ισχύος 2x880 Watts remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Image | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SKU | L-2400 | XR2000 | XTi-2002 | LDSP1K8 | XLS-2000 | S-1500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Price | €1,198.00 με ΦΠΑ 24% | €2,814.80 με ΦΠΑ 24% | €777.00 με ΦΠΑ 24% | €1,727.50 με ΦΠΑ 24% | €454.00 με ΦΠΑ 24% | €1,160.64 με ΦΠΑ 24% | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας) | Διαθέσιμο κατόπιν παραγγελίας | Εξαντλημένο | Διαθέσιμο κατόπιν παραγγελίας | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Availability | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας) | Διαθέσιμο κατόπιν παραγγελίας | Εξαντλημένο | Διαθέσιμο κατόπιν παραγγελίας | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Content | Τελικός ενισχυτής 2Χ750W/4Ω, 2Χ500W/8Ω, 2Χ1200W/2Ω, bridged 2400W/4Ω, απόκριση 20-20kHz, κύκλωμα προστασίας υπερθέρμανσης, βραχυκυκλώματος, DC voltage. Διαθέτει κύκλωμα clip-limiter, είσοδοι balanced XLR, 1/4 TRS, έξοδοι speakon & binding post, high pass filter 30Ηz & 50Ηz. Ανεμιστήρας ψύξης. Ύψος 2U. Κατάλληλος για εγκαταστάσεις & P.A. 15,6Kg. |
XR Series - Intelligent Power A lightweight with enormous power output. Combined with digital signal processing. High Tech SMT Design Technical Data: |
Tελικός ενισχυτής 2x800w/4Ω-2x1000w/2Ω/1x2000w/4Ω bridge. Νέα βελτιωμένη μονάδα DSP και οθόνη LCD. Η νέα σειρά XTI2 διαθέτει: Peak Plus Limiters-με ρύθμιση threshold/attack/release-Enchaced SubHarmonic Syntesizer. Ρύθμιση λειτουργίας FAN για πλήρη έλεγχο της ψύξης, νέος έλεγχος και monitoring μέσω software της τάσης λειτουργίας και της θερμοκρασίας του τροφοδοτικού. Χειρολαβές ενισχυμένου αλουμινίου, δυνατότητα κλειδώματος της παροχής τροφοδοσίας, βελτιωμένο software ελέγχου System Archtect και ΗιQnet Band Manager και 30 θέσεις μνήμης. Το DSP του ενισχυτή διαθέτει: Ιnput EQ 6 band parametric+Hi και Low passFilters-Crossover Highpass and Lowpass φίλτρα για κάθε κανάλι. Butterworth 6/12/18/24dB per octave. Linkwitz-Riley 24/48dB ανά Octave με ρύθμιση ±15dB bandpass gain και ρύθμιση φάσης. Output EQ 8 x παραμετρικά φίλτρα ανά κανάλι με ρύθμιση Q, ±15dB boost/cut. Delay μέχρι 50ms, ευαισθησία εισόδου 1.4v/ Bύσματα εισόδου XLR με Loop Thru. Speakon βύσματα, Θύρα USB. Διαστάσεις: βάθος 31εκ., ύψος 2U. Bάρος 8,4 kg. |
The new LD Premium Audio CLASS-H SMPS amplifiers distils all the features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the LD Premium amps, you'll find four 2-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.
|
Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today. XLS
XLS Series with Integrated DriveCore™ Technology This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore™ Technology, PureBand™ Crossover System and Peakx™ limiters. And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability. Generating chest-thumping lows and crystal clear highs, the four models in the series – the XLS1000, XLS1500, XLS2000, and XLS2500 – are engineered to meet any demanding audio requirements – reliably and within budget. Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value! Integrated DriveCore™ Technology To overcome this obstacle, Crown engineers developed DriveCore™ Technology – a proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Class D output stage. Over 60 years of Crown's design knowledge and experience went into the development of this technology resulting in truly remarkable benefits. DriveCore™ Technology provides an extremely wide-tolerance with regards to sagging or "dirty" AC line conditions providing consistent performance without affecting audio quality. This means that your performance will not be compromised by fluctuating generator power or overloading by lighting rigs, backline gear, etc. In addition, DriveCore™ Technology's patented feedback and PWM modulation circuits enable fast recovery on peak transients, accurate reproduction of low-level detail, and precise tracking of low-frequencies at high power levels for maximum subwoofer output. Advanced Switched-Mode Power Supply PureBand™ Crossover System
All of the PureBand™ Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface. Peakx™ limiters | Sensitivity (for full rated power at 4 ohms) | 1.4 Vrms | Frequency Response (at 1 watt, 20 Hz - 20 kHz) | +0 dB, –1 dB | Signal-to-Noise Ratio | Rated as dBr to full rated 8Ω power output (A-Weighted): | Damping Factor (8 ohm): 10 Hz to 400 Hz | > 200 | Crosstalk (below rated 8Ω power) | At 1kHz: > 85dB | Input Impedance (nominal) | 20 kΩ balanced, 10 kΩ unbalanced | Load Impedance | 2 to 8 Ω per channel in Stereo | AC Line Voltage and Frequency Configurations Available (± 10%) | 120 VAC 60 Hz | Ventilation | Flow-through ventilation from front to back | Cooling | Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation | Air Volume Requirements (per minute per unit) | 80.15 ft³ (2.27 m³) | Integrated Processing | PureBand™ Crossover System Crossover Filter: Linkwitz-Riley 24dB per Octave Crossover Frequency Range: 50 HZ - 3 kHz Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF). Peakx™ limiters: Channel independent clip limiter designed to | Input/Output | Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers. Output Connectors: Two 4-Pole Speakon® Output Connectors One pair of back-panel binding posts per channel; accepts | Construction | XLS1000/XLS1500: 8.12-Inch (20.62cm) depth | Dimensions | EIA Standard 19-inch (48.3-cm) rack mount width | Net Weight , Shipping Weight | XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) |
The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment.
In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.
• Ultra-compact and lightweight 2-U high
• Laser cut aluminum front panels with integrated carrying handles
• Neutrik® XLR input connectors, input and signal link in 2 channel models
• Input Link switch: allow daisy-chaining of the input signal
• Neutrik® Speakon® output connectors
• Detented sealed potentiometers for easy recall of volume settings
• ICL™, PMS™, Hi-temp, Signal indicators per channel
• Power on and Stand-by leds
• Highly versatile with multiple configuration and additional module options
• Full PC control via EtheRAM (with EtheRAM Control module)
• Switchable ICL™ clip-limiters per channel
• Switchable (30-50 Hz) sub-sonic highpass filter per channel
• Three-position gain selector (26, 32 or 38 dB)
• Dual or bridge mode selector
• Twin temperature controlled, back to front cooling fans
• Oversized power components (high SOA reserve specification)
Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility.
Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics:
• 2-way stereo crossover (dual mono or single bridged sub output)
• 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz)
• Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB)
• Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB)
DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics:
• 4 Inputs/4 Outputs or 2 In/2 Out free route configurable.
• 24 bits/192 kHz 256x Oversampling Converters.
• Output Delay: 0 to 7.1 meters (20.69ms) per channel.
• XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel.
• EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB).
• Gain, Mute and Phase inversion per channel.
• RMS Power and Peak Voltage output limiter per channel.
• Real Time operation from USB or front panel configuration.
Standard Signal Inputs Module
EtheRAM Control Module
Ethernet Audio Transport (Coming soon)
Analog Processor Module
DSP44_S Module
EtheRAM Control Module
AES/EBU Digital Input (Coming soon)
OUTPUT POWER | S-1500 | S-2000 | S-3000 | S-4000 | S-6000 | S-3004 | S-4004 | S-4044 | S-6004 | S-6044 | |
1kHz, 1.0% THD | |||||||||||
2 ohms | 2x880W | 2x1190W | 2x1570W | 2x1950W | 2x2950W | 4x700W | 4x980W | - | 4x1440W | - | |
4 ohms | 2x575W | 2x790W | 2x1100W | 2x1380W | 2x2025W | 4x500W | 4x670W | 4x975W | 4x1000W | 4x1480W | |
8 ohms | 2x325W | 2x460W | 2x630W | 2x810W | 2x1250W | 4x300W | 4x430W | 4x690W | 4x620W | 4x1015W | |
Bridge @ 4ohms | 1760W | 2380W | 3140W | 3900W | 5900W | 2x1400W | 2x1960W | - | 2x2880W | - | |
Bridge @ 8ohms | 1150W | 1580W | 2200W | 2760W | 4050W | 2x1000W | 2x1340W | 2x1950W | 2x2000W | 2x2960W | |
P. N. 12dB C.F. | |||||||||||
2 ohms | 2x975W | 2x1360W | 2x2060W | 2x2460W | 2x4225W | 4x890W | 4x1170W | - | 4x2080W | - | |
4 ohms | 2x610W | 2x880W | 2x1240W | 2x1600W | 2x2600W | 4x580W | 4x820W | 4x1230W | 4x1280W | 4x2110W |
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz
Phase Response (@1W 20Hz-20kHz): ±15deg
Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB
Voltage Gain (selectable): 26/32/38 dB
Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V
3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V
Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB
3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB
Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A
3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A
Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches
Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™
Βάρος | 15.60 kg |
---|
Βάρος | 9.00 kg |
---|
Βάρος | 9.80 kg |
---|
Βάρος | 8.00 kg |
---|
Βάρος | 4.00 kg |
---|
Βάρος | 8.00 kg |
---|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.