JBL 2262H HPL Ανταλλακτικό Μεγάφωνο Woofer 12″ NEODYMIUM

445.62 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: JBL-338312-004X Κατηγορία:
Brand New Genuine JBL 2262H or 2262HPL12″ Neodymium Speaker. 700 watts RMS, 1,400 watts continuous, 3″ voice coil, 8 ohm. The JBL 2262HPL Differential Drive woofer performs better than conventional 12″ PA speakers because it is engineered better. Compared with traditional driver designs, JBL’s patented Differential Drive makes use of a pair of inline voice […]

 

Διαβάστε περισσότερα

Brand New Genuine JBL 2262H or 2262HPL12″ Neodymium Speaker. 700 watts RMS, 1,400 watts continuous, 3″ voice coil, 8 ohm.

The JBL 2262HPL Differential Drive woofer performs better than conventional 12″ PA speakers because it is engineered better. Compared with traditional driver designs, JBL’s patented Differential Drive makes use of a pair of inline voice coils in separate magnetic gaps instead of a single voice coil-gap combination. This permits a more effective use of available space, and expedites efficient removal of heat from the motor structure. Specifically, the voice coils are wound reversely and are immersed in magnetic fields of opposite polarity. This ensures reduced magnetic leakage flux and focuses more magnetic energy in the gaps where it is needed. The 2262HPL is used in JBL’s SRX712, SRX722, and VRX932L speaker systems.

Brand Jbl Professional
Impedance 8Ω
Model 2262HPL
Unit of Measure  Each
Power Handling (RMS)  700 Watts
Barcode 844632090875

Specifications:

Nominal Basket Diameter 12″ / 300mm
Impedance 8 ohms
AES Power Handling 700 Watts  
Program Power Handling 1,400 Watts  
Frequency Response 50Hz – 1.2kHz
Sensitivity (1W/1m) 96dB
Voice Coil Diameter 3″ / 76.2mm
Max. Crossover Frequency 1.5kHz
Recommended Enclosure Volume 22.7 – 56.6 Liters / 0.8 – 2.0 cu. ft.
MOUNTING INFORMATION
Overall Diameter 12.25″ / 311mm
Bolt Circle Diameter 11.625″ / 294mm
Baffle Cutout Diameter 11.375″ / 288.9mm
Overall Depth 7.375” / 187.3mm
Net Weight 4.55 kg. / 10 lbs.
MATERIALS
Basket Die Cast Aluminum
Cone Paper
Magnet Neodymium
THIELE-SMALL PARAMETERS
Resonant Frequency (fs) 56.8 Hz
Impedance (Re) 5.2 ohms
Coil Inductance (Le) 1.7mH
Mechanical Q (Qms) 2.79
Electrical Q (Qes) .39
Total Q (Qts) .34
Compliance Equivalent Vol. (Vas) 49.56 Liters/1.74cu. ft.
Voice Coil Overhang (Xmax) 8.0mm
BL Factor 17.99 T-M
Diaphragm Mass (Mms) 68 Grams
Reference Efficiency 2.25%
Effective Surface Area (Sd) .055 m2

 

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “JBL 2262H HPL Ανταλλακτικό Μεγάφωνο Woofer 12″ NEODYMIUM”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

JBL 2262H HPL Ανταλλακτικό Μεγάφωνο Woofer 12" NEODYMIUM removeRCF COVERTTS18 Κάλυμα προστασίας για ηχείο removeRCF FLY BAR TTL31 SUSPENDING BAR FOR TTL31-A removeTOA SR-SA3 Stand Adapter για τη Σειρά Line Array SR Column removeTOA SR-EP3 Extension Plate για τη Σειρά Line Array SR Column removeRCF KARTTTL33 KART WITH WHEELS remove
NameJBL 2262H HPL Ανταλλακτικό Μεγάφωνο Woofer 12" NEODYMIUM removeRCF COVERTTS18 Κάλυμα προστασίας για ηχείο removeRCF FLY BAR TTL31 SUSPENDING BAR FOR TTL31-A removeTOA SR-SA3 Stand Adapter για τη Σειρά Line Array SR Column removeTOA SR-EP3 Extension Plate για τη Σειρά Line Array SR Column removeRCF KARTTTL33 KART WITH WHEELS remove
Imagejbl woofer 338312-004x replacement 2262
SKUJBL-338312-004XCOVERTTS18TTL31SR-SA3SR-EP3KARTTTL33
Rating
Price 445.62 με ΦΠΑ 24% 150.30 με ΦΠΑ 24% 1,116.00 με ΦΠΑ 24% 190.00 με ΦΠΑ 24% 104.00 με ΦΠΑ 24% 886.28 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
ContentBrand New Genuine JBL 2262H or 2262HPL12″ Neodymium Speaker. 700 watts RMS, 1,400 watts continuous, 3″ voice coil, 8 ohm. The JBL 2262HPL Differential Drive woofer performs better than conventional 12" PA speakers because it is engineered better. Compared with traditional driver designs, JBL's patented Differential Drive makes use of a pair of inline voice coils in separate magnetic gaps instead of a single voice coil-gap combination. This permits a more effective use of available space, and expedites efficient removal of heat from the motor structure. Specifically, the voice coils are wound reversely and are immersed in magnetic fields of opposite polarity. This ensures reduced magnetic leakage flux and focuses more magnetic energy in the gaps where it is needed. The 2262HPL is used in JBL's SRX712, SRX722, and VRX932L speaker systems. Brand Jbl Professional Impedance 8Ω Model 2262HPL Unit of Measure  Each Power Handling (RMS)  700 Watts Barcode 844632090875 Specifications:
Nominal Basket Diameter 12″ / 300mm
Impedance 8 ohms
AES Power Handling 700 Watts  
Program Power Handling 1,400 Watts  
Frequency Response 50Hz – 1.2kHz
Sensitivity (1W/1m) 96dB
Voice Coil Diameter 3″ / 76.2mm
Max. Crossover Frequency 1.5kHz
Recommended Enclosure Volume 22.7 – 56.6 Liters / 0.8 – 2.0 cu. ft.
MOUNTING INFORMATION
Overall Diameter 12.25″ / 311mm
Bolt Circle Diameter 11.625″ / 294mm
Baffle Cutout Diameter 11.375″ / 288.9mm
Overall Depth 7.375” / 187.3mm
Net Weight 4.55 kg. / 10 lbs.
MATERIALS
Basket Die Cast Aluminum
Cone Paper
Magnet Neodymium
THIELE-SMALL PARAMETERS
Resonant Frequency (fs) 56.8 Hz
Impedance (Re) 5.2 ohms
Coil Inductance (Le) 1.7mH
Mechanical Q (Qms) 2.79
Electrical Q (Qes) .39
Total Q (Qts) .34
Compliance Equivalent Vol. (Vas) 49.56 Liters/1.74cu. ft.
Voice Coil Overhang (Xmax) 8.0mm
BL Factor 17.99 T-M
Diaphragm Mass (Mms) 68 Grams
Reference Efficiency 2.25%
Effective Surface Area (Sd) .055 m2
 

Protection cover for TTS18 and TT18-A.

GENERAL SPECIFICATIONS
   
PHYSICAL SPECIFICATIONS
Height: mm/inch
Width: mm/inch
Depth: mm/inch
Net Weight:1,77/3.9Kg/Lbs
SHIPPING INFORMATION
Package height:130/5.11mm/inch
Package width:470/18.5mm/inch
Package depth:750/29.52mm/inch
Package weight:2,7/5.95Kg/Lbs

 

Features
TT+ approved original accessory
Strong steel construction
Painted with black, scratch resistent, paint

The SR-SA3 is designed to be used to mount the Line Array Speaker on a speaker stand.
Applicable Speaker: SR-H3S, SR-H3L, SR-H2S, SR-H2L
Finish: Steel plate, black, paint
Dimensions: 62(w)x385(h)x69(d) mm
Weight: 1.4

The SR-EP3 Extension Plate is used to link the linear type Line Array Speakers.
Applicable Speakers: SR-H3L, SR-H2L
Number of Speaker to be Jointed: Up to 2 speakers
Finish: Steel plate, white, paint
Dimensions: 64(w)x720(h)x11.5(d)mm
Weight: 1.1 kg

The heavy duty RCF TTL33-A Kart can be use to easily transport up to 4 TTL33-A cabinets. The cabinets and Kart are fully compatible and it is possible to easily transport TTL33-A cabinets in straight or splayed configurations.
It is possible to transport 4 TTL33-A modules with the fly-bar connected, making sure that the total system centre of gravity is properly in centre of the kart.

Features
TT+ approved original accessory
Strong construction
Transport of up to 4 TTL33-A modules
Safe lock of the modules on the bottom
Equipped with 4 high quality wheels with brakes
Painted with black, scratch resistant, paint

 

Weight1.00 kg2.70 kg45.00 kg1.40 kg1.10 kg3.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 2.70 kg
Βάρος 45.00 kg
Βάρος 1.40 kg
Βάρος 1.10 kg
Βάρος 3.00 kg