JBL CSM-32 PUBLIC ADDRESS MIXER

Επεξεργαστής σήματος, διαθέτει 3 stereo, 1 line priority audio, 1 mic με phantom power εισόδους, και 2 stereo εξόδους με ενσωματωμένο crossover για χρήση subwoofer, συν 1 aux έξοδο. Συμβατό με τα επίτοιχα controllers της σειράς CSM για απομακρυσμένο έλεγχο, και τα μικρόφωνα αναγγελιών CSPM. Δυνατότητα ducking και ελέγχου της ποσότητας μέσο κομβίου, θύρα RJ-45 για Link με άλλες μονάδες, θύρα USB για Firmware Update. EQ, Level Guard και Auto Warmth σε κάθε είσοδο για ομοιόμορφη ακρόαση και συχνοτική συμπεριφορά ανεξαρτήτως έντασης. Εύκολο routing.

LD Systems ZONE 624 4-Zone Mixer

The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.

The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.

The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.

• Type: stereo
• Number of Zones: 4 (Master, Zone A-C)
• Installation Height: 3U
• Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
• Frequency Response: 20 - 40.000 Hz
• Microphone Channels: 2 (with phantom power 12 V)
• Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
• Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
• Microphone Channels Display Elements: On-LED
• Microphone Channels Input Impedance: 4 kOhm
• Microphone Channels Input Sensitivity: 4.5 mV
• Microphone Channels THD: 0,08 %
• Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
• Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
• Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
• Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
• Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
• Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
• Line Channels THD: 0,02 % (Phono 0,05%)
• input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
• Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
• Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
• Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
• Master Display Elements: 2 x 10 segment level meter
• Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
• Zone Output Connections: XLR (balanced), Terminal Block
• Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
• Zone Display Elements: 5-segment level meter
• Zone Output Levels: 24 dBu (balanced/ unbalanced)
• Output Connections Rec: 2 x RCA
• Headphone Output: 1
• Headphone Out Port: 6.3 mm jack stereo
• Headphone Output Controls: Cue Volume
• Headphone Output Voltage: 2,5 V 32 Ohm
• Additional Inputs: 2 (Emergency Input, Output Mute)
• Additional Input Connections: Terminal Block
• Additional Input Controls: Level Emergency Input
• Emergency Input Sensitivity: 5 V
• Additional Controls: power switch
• Additional Display Elements: Power-LED
• Operating Voltage: 220 - 250 V AC, 50 Hz
• Power Socket: IEC power socket
• Power Consumption (max.): 25 W
• Fuse: T 500 mAL / 250 V
• Dimensions (W x H x D): 485 x 132 x 210 mm
• Accessories included: terminal blocks, power cable, operating instructions

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

• Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs

• • 3 zones with routing facility of all input channels as desired
  • 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
  • 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
  • Talkover level and response time adjustable
  • Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
  • Color illuminated rotary controls and rubber buttons
  • Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
  • 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
  • Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
  • Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
  • Operation via supplied power unit
  • Rack installation, 2 U
  • Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)

  Power supply:	230 V AC, 50 Hz
  Protection class:	Protection class II
  Power connection:	Power supply cord with Euro plug (provided)
  Frequency range:	20 - 20000 Hz
  S/N ratio:	>60 dB line >70 dB phono
  THD:	Line/phono <0,02 % at 1 kHz
  Gain:	Microphone 52 dB Line 17 dB Phono 53 dB
  Housing color:	Black
  Zone output:	3 adjustable zones
  Control elements:	Power switch, regular talkover, source selector
  Status LED:	Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing
  Connections:	Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Input: line/phono via 2 x stereo RCA Input: line via 8 x stereo RCA Output: master via 3 x 3-pin XLR Output: master via 3 x stereo RCA Output: rec. via 2 x stereo RCA Output: headphones via 1 x 6.3-mm-jack (bal.)
  Channels:	Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch, Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ Rec. output: 1 x stereo via RCA, Routing master bus switch, Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function,
  Housing design:	(19") 48.3 cm rack installation 2 U
  Dimensions:	Width: 48,3 cm Depth: 14,8 cm Height: 8,9 cm
  Weight:	3,10 kg