| Content |
Project Lone Pine
Kali\'s debut LP-6 studio monitors are designed to give you world-class power and accuracy without breaking the bank.
Performance
Transparency. Clarity. Accuracy.
Kali Audio\'s Lone Pine Series studio monitors are designed to allow you to hear every detail that\'s happening in your mix.
This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you\'ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.
With the LP-6, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
80W Class D Power
39 Hz Lower Frequency Response
< 3% System THD 94 dB @ 1M
112 dB Max SPL
3-D Imaging Waveguide
Hear three dimensional sound from a stereo pair of speakers.
Dual-Layer Voice Coil
Large diameter voice coil allows for low distortion and high dynamic range.
Low Noise Port Tube
Precisely engineered using airflow simulations for powerful bass without port noise.
The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on.
Rather than make our own claims about the accuracy of our speakers, we had them independently tested by Pro Sound Testing in Greenville, Indiana. You can download their full test data from the links below, and explore the frequency response, dispersion, and distortion characteristics of both the LP-6 and LP-8. Please note that this data requires the "Common Loudspeaker Format Viewer" application to view.
Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.
This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily.
Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you’re hearing the bass that you have on the track.
The integrated Class D Power amp delivers clean, reliable power that’s optimized to this speaker.
Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.
Boundary EQ Control
A speaker’s given position in a space can drastically change it’s frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.
Happily, most of the common positions are fairly predictable and easily corrected.
Kali’s team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers.
Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed.
Easy Connections
The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.
The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.
3-D Imaging Waveguide
The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What’s more: it’s calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.
In practical terms, what this means is that you’re hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you’re working on. This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.
Low Noise Port Tube
We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they’d be placed against walls. At the same time, we didn’t want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn’t make noise.
On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
| |
|---|
| Powered: |
Yes |
|
| Amp Class: |
D |
|
| Power Config: |
Bi-Amped |
|
| LF Power: |
40 W |
|
| HF Power: |
40 W |
|
| Total Power: |
80 W |
|
| LF Driver: |
6.5" Woofer |
|
| HF Driver: |
1" Soft Dome Tweeter |
|
| Freq. Response (-10 dB): |
39 Hz - 25 kHz |
|
| Frequency Range (±3 dB): |
47 Hz - 21 kHz |
|
| Crossover: |
1.5 kHz |
|
| Listening Distance: |
2.2 Meters |
|
| Max SPL: |
112 dB |
|
Διαστάσεις
Height: 14.125 Inches (35.9 cm) Width: 8.75 Inches (22.2 cm) Depth: 10.25 Inches (26 cm) Weight: 15.54 lbs (7.01 kg)
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
Driver technology
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
| Mid-Woofer |
| | Number | 1 | | Basket Ø | 7" (175 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 100 W / 150 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 42 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥106 dB | | Max. peak | ≥114 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 20.3 lb (9,2 kg) | | Magnetically shielded | No | | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
|
Ενεργό επαγγελματικό ηχείο 3 δρόμων nearfield/midfield με 3 ενσωματωμένους ενισχυτές (2*150+100 Watts RMS). Με 2 μεγάφωνα Focal 6,5” σε διάταξη sandwich για το woofer και ανεστραμμένου θόλου καθαρού Βηρυλλίου για το tweeter. Το γούφερ είναι κατασκευασμένο σε μορφή κώνου ΅ΆWΆΆόπως και τα μεγάφωνα στις περίφημες consumer σειρές Utopia της Focal και το τουίτερ είναι το ίδιο περίφημο τουίτερ βηρυλλίου ανεστραμμένου θόλου από τις ίδιες σειρές.
Χάρη στην εξαιρετική κρουστική απόκριση συχνότητας το tweeter παίζει flat μέχρι τα 40kHz με δυναμική περιοχή SPL της τάξης των 115dB@1M. Kαι τα δύο woofer χρησιμοποιούνται για τις χαμηλές συχνότητες αλλά μόνο το ένα (επιλεκτικά) χρησιμοποιείται σαν μεγάφωνο μεσαίων συχνοτήτων.
Όπως κάθε προϊόν Focal τα Twin6 έχουν σχεδιαστεί με τη φιλοσοφία να είναι ένα επαγγελματικό εργαλείο που αναπαράγει την πραγματικότητα της μουσικής χωρίς να αυξάνει ή να υποβαθμίζει κάποιες συχνότητες.
Αν θέλεις να «ακούσεις πως είναι πραγματικά η μουσική και όχι πως χρωματίζουν τα ηχεία σου».
Η τιμή του προϊόντος αφορά τεμάχιο και όχι ζευγάρι
| Χαρακτηριστικά της σειράς D3
> Σχεδίαση με δύο ενισχυτές για δυναμικό και ακριβή ήχο,
> Ειδικά σχεδιασμένος οδηγός στα tweeter, για καλύτερη στερεοφωνική εικόνα,
> Σύστημα 'Acoustic Space Control', για προσαρμογή των χαμηλών συχνοτήτων στον κάθε χώρο,
> Βελτιωμένο σύστημα Bass Reflex, για εκτεταμένη απόκριση χαμηλών συχνοτήτων,
> Είσοδοι XLR balanced και 1/4” balanced/unbalanced, για εύκολη σύνδεση με audio interfaces,mixers, synthesizers, DJ gear
>Έλεγχος στάθμης ακρόασης,
>Φωτεινή ένδειξη LED στο εμπρός μέρος, που γίνεται πιό έντονη όταν το ηχείο τοποθετείται στη σωστή γωνία ακρόασης.
Χαρακτηριστικά BX8
> Συνολική ισχύς 150 watts (80 watts για woofer, 70 watts για tweeter),
> Woofer 8 ιντσών από Kevlar,
> Tweeter θόλου 1.25 ιντσών (από φυσικό μετάξι) με εξαιρετική λεπτομέρεια στον ήχο,
> Απόκριση συχνότητας: 37Hz - 22kHz.
Η τιμή αφορά σε τεμάχιο |
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The most powerful AX monitor
With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.
The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.
Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.
Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.
On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.
Review: A8X: a "powerful link" between near- and midfield monitors!
"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)
| Mid-Woofer |
| | Number | 1 | | Basket Ø | 8.5" (220 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 150 W / 225 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 38 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥112 dB | | Max. peak | ≥120 dB | | Crossover frequencies | 2300 Hz | | Input impedance | 30 KOhm | | Weight | 28.7 lb (13 kg) | | Magnetically shielded | No | | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
| Αυτοενισχυόμενα ηχεία monitor ισχύος 2 X 8 watts. Εφοδιάζονται με woofer 4” και tweeter 1,5”. Απόκριση συχνότητας 80-20000Hz. Είσοδοι line in σε RCA stereo & mini jack. Είσοδος mic σε jack 1/4 με ρύθμιση έντασης. Γενική ρύθμιση έντασης & bass/treble. Έξοδος ακουστικών σε mini jack. Βάρος 3,5 Kgr. (ΤΙΜΗ ΖΕΥΓΟΥΣ).
| Κατασκευαστής |
BEHRINGER |
| Τύπος Ηχείου |
Ενεργό |
| Κατηγορία Ηχείου |
Studio Monitor |
| Υλικό Κατασκευής |
Πλαστική Καμπίνα |
| Χρώμα |
Μαύρο |
| Βάρος (kg) |
3,5 |
| Συνολική Ισχύς (Watt) |
16 |
| Διάμετρος Woofer (inches) |
4 |
| Tweeter / Driver (inches) |
1 |
| Απόκριση συχνοτήτας (Hz) |
80-20000 |
| Σειρά |
MS series |
| Μοντέλο |
MS16 |
|
|
|
|
Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
- Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
- Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
- Dedicated Volume, Bass and Treble controls for more flexibility
- Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
- Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
- 1/8'' TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- Designed and engineered in Germany
Specifications
- Woofer: 4''
- Tweeter: 1.5''
- Output Power: 2 x 8 Watts
- Frequency Response: 80Hz - 20kHz
- Speaker Impedance: 4?
- Input 1:
- Connector: 1/8'' TRS Stereo
- Input Level: -10dBm, 10k?
- Input 2:
- Connector: RCA Stereo
- Input Level: -10dBm, 10k?
- Mic Input:
- Connector: 1/4'' TRS
- Input Level: -50dBm, 50?
- Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
- Weight: 4kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.